IntesisBox FJ-RC-KNX-1i English Datasheet
Transkrypt
IntesisBox FJ-RC-KNX-1i English Datasheet
IntesisBox® FJ-RC-KNX-1i Datasheet r1 eng IntesisBox ® FJ-RC-KNX-1i KNX interface for Fujitsu General Limited air conditioners FJ-RC-KNX-1i allows a complete and natural integration of Fujitsu air conditioners with KNX control systems. Simple installation. Can be installed inside the own AC indoor unit, connecting one side directly to the BWR bus, and the other side directly to the KNX TP-1 (EIB) bus. Great flexibility of integration into your KNX projects. Configuration is made directly from ETS, the database of the device comes with a complete set of communication objects allowing, from a simple and quick integration using the basic objects, to the most advanced integration with monitoring and control all the AC unit’s parameters. Also available specific device’s communication objects, as save and execute scenes. Four binary inputs for potential-free contacts provide the possibility to integrate many types of external devices. Also configurable from ETS, they can be used for switching, dimming, shutter/blind control, and more. Allows the use of a KNX temperature sensor for the air conditioning control. IntesisBox® FJ-RC-KNX-1i will offer you a full integration of the air conditioning in your KNX projects at a very affordable price. © Intesis Software S.L. - All rights reserved This information is subject to change without notice IntesisBox® is a registered trademark of Intesis Software SL URL Email tel http://www.intesis.com [email protected] +34 938047134 1/4 IntesisBox® FJ-RC-KNX-1i Datasheet r1 eng 1. KNX Interface 1.1 Communication Objects The ETS database of the device comes with multiple communication objects allowing great flexibility of integration. 1.2 Parameters Multiple parameters can be configured to ensure the maximum flexibility for the integration, not only in functionality of the device but in visibility of objects in ETS for a more comfortable integrator’s work. © Intesis Software S.L. - All rights reserved This information is subject to change without notice ® IntesisBox is a registered trademark of Intesis Software SL URL Email tel http://www.intesis.com [email protected] +34 938047134 2/4 IntesisBox® FJ-RC-KNX-1i Datasheet r1 eng 2. Connection The FJ-RC-KNX-1i can be used with a FUJITSU Remote Controllers or without them. Use the KNX connector in the FJ-RC-KNX-1i to connect to the KNX TP-1 (EIB) network. FJ-RC-KNX-1i with FUJITSU wired Remote Controller Binary inputs for potential-free contacts Remote Control AC Indoor Unit COM IN4 IN3 IN2 R W B B AC Unit W R KNX TP-1 (EIB) bus IN1 FJ-RC-KNX-1i GND (1) B Data (2) W Power (3) R Internal electronic control board Max. 500 m FJ-RC-KNX-1i without FUJITSU wired Remote Controller Binary inputs for potential-free contacts COM AC Indoor Unit IN4 IN3 IN2 AC Unit B W R KNX TP-1 (EIB) bus IN1 FJ-RC-KNX-1i GND (1) B Data (2) W Power (3) R Internal electronic control board Max. 500 m 3. List of compatible Fujitsu General Limited AC indoor units A list of Fujitsu General Limited indoor unit model references compatible with FJ-RC-KNX-1i and their available features can be found in: Fujitsu: http://www.intesis.com/pdf/IntesisBox_FJ-RC-xxx-1_AC_Compatibility.pdf General: http://www.intesis.com/pdf/IntesisBox_GE-RC-xxx-1_AC_Compatibility.pdf Fuji Electric: http://www.intesis.com/pdf/IntesisBox_FE-RC-xxx-1_AC_Compatibility.pdf Hiyasu: http://www.intesis.com/pdf/IntesisBox_HY-RC-xxx-1_AC_Compatibility.pdf © Intesis Software S.L. - All rights reserved This information is subject to change without notice ® IntesisBox is a registered trademark of Intesis Software SL URL Email tel http://www.intesis.com [email protected] +34 938047134 3/4 IntesisBox® FJ-RC-KNX-1i Datasheet r1 eng 4. Technical Specifications 70 mm KNX bus connection Binary inputs Programming LED 70 mm Programming button AC Indoor unit BWR bus connection 28 mm Envelope Dimensions Weight Colour ABS (UL 94 HB). 2,5 mm thickness 70 X 70 X 28 mm 70g Ivory white 29V DC, 7mA Power supply Supplied through KNX bus. Voltage: 13-18V AC Indoor Unit Bus Current: 80mA LED indicators 1 x KNX programming. Push buttons 1 x KNX programming. 4 x Potential-free binary inputs. Signal cable length: 5m unshielded, may be extended up to 20m with twisted. Binary inputs Compliant with the following standards: IEC61000-4-2 : level 4 - 15kV (air discharge) - 8kV (contact discharge) MIL STD 883E-Method 3015-7 : class3B Configuration Configuration with ETS. Operating From -25ºC to 85ºC Temperature Storage From - 40ºC to 45ºC Temperature Isolation Voltage 2500V RoHS conformity Compliant with RoHS directive (2002/95/CE). CE conformity to EMC directive (2004/108/EC) and Low-voltage directive (2006/95/EC) Certifications EN 61000-6-2 EN 61000-6-3 EN 60950-1 EN 50491-3 EN 50090-2-2 EN 50428 EN 60669-1 EN 60669-2-1 © Intesis Software S.L. - All rights reserved This information is subject to change without notice ® IntesisBox is a registered trademark of Intesis Software SL URL Email tel http://www.intesis.com [email protected] +34 938047134 4/4