M-1002 M-1602 M-2202
Transkrypt
M-1002 M-1602 M-2202
Pr ofessional mixer console M-1002 M-1602 M-2202 Professional mixer 1 XLR Mic. Inuput 1 MIC 1 Balanced XLR Mic. Connector, power supplied by +48V phantom power, can accept all kinds of balanced or unbalanced Mic. Signal. 2 LINE INPUT 2 LINE 3 INSERT 20 3 INSERT GAIN 4 0 1/4 balanced connector can accept balanced or unbalanced sound signal, such as keyboard or other musical instrucpments. Tip=Signal+ Ring=SignalHole=Sleeve Signal input, Microphone signal output 60 0 HIGH 5 -15 +15 0 MID 6 -15 +15 0 7 +15 5 Enable the gain of microphone from -60dB to -20dB by adjusting this control. 5 HIGH FREQUENCY CONTROL LOW -15 4 GAIN You can increase or decrease 15dB at 12KHz by adjusting this knob. AUX1 8 0 10 5 AUX2 6 MID FREQUENCY CONTROL You can increase or decrease 15dB at 3.5KHz by adjusting this knob. 9 0 10 5 7 LOW FREQUENCY CONTROL EFF 10 0 10 0 You can increase or decrease 15dB at 350 Khz by adjusting this knob. PAN 8 AUX 1 L5 5R PEAK MAIN SUB +6 The level of the monitor aux output channel can be adjusted by this knob. 9 AUX 2 +3 The level of the monitor aux output channel can be adjusted by this knob. 0 -3 -6 10 EFFECT -10 -20 -30 - PFL To get different delayed effect, adjust this control to change the input level. 1 1 Professional mixer 1 11 PAN MIC 1 2 1 13 Signals can be distributed to right and left generatrix unequally by adjusting this control. When the knob is in the middle, the signals are distributed equally to both right and left lines. When the knob is on the left, the signals to the right channel will increase, while to the left, decrease. When the knob is on the right, the signals to the left channel will increase, while to the right, decrease. When the knob is on the right end, left channel will be off. While on the left end, the right will be off. 2 LINE 3 INSERT 20 GAIN 12 PEAK 0 60 0 HIGH -15 The peak level indicator will be light when the clip level exceeds +10dB. +15 0 MID -15 13 MAIN +15 0 Press this key to let the signal output from main channel. LOW -15 14 SUB +15 5 AUX1 0 Press SUB channel control for signal output from SUB signal line. 10 5 AUX2 15 CHANNEL ADJUSTMENT FADER 0 10 5 For performance harmony, adjust this fader to control total channel signals from MAIN and SUB. EFF 0 10 0 PAN 11 L5 5R 12 PEAK MAIN SUB +6 11 16 PFL You can monitor the output condition from this channel by headphone after pressing this control. 13 14 13 +3 0 -3 -6 -10 -20 15 -30 - PFL 16 13 1 2 Professional mixer 1 STEREO/MONO 7/8 STEREO 1 L R Lotus connector and 1/4 connector are right and left stereo line input that are used for balanced high level input signals. If the signals are input to input connector of left channel, output level of signal output will be transited to the left or right signal; if the signals are input to the right input connector, the output level will only be transited to the right channel. If the signals from each channel are input to the input connectors of right and left channels, both output channels will be stereo output. 7 L 2 LINE INPUT MONO Press the knob, input signals will be decreased -10dB. R 8 3 HIGH FREQUENCY CONTROL INPUT -10 +4 0 2 4 LOW FREQUENCY CONTROL HIGH 3 -15 +15 0 +15 5 0 AUX1 10 5 0 5 AUX2 10 0 PAN 11 7 L5 5R 8 PEAK MAIN +6 The level of aux output channel can be controlled and monitored by adjusting this knob. To get different delayed effects, adjust this control to change the input level. 7 PAN EFF 6 0 5 AUX1 AUX2 6 EFFECT 10 5 You can increase or decrease 15dB at 350Hz by adjusting this knob. LOW 4 -15 You can increase or decrease 15dB at 12KHz by adjusting this knob. SUB +3 9 Signals can be distributed to right and left generatrix unequally by adjusting this control. When the knob is in the middle, the signals are distributed equally to both right and left lines. When the knob is on the left, the signals to the right channel will increase, while to the left, decrease. When the knob is on the right, the signals to the left channel will increase, while to the right, decrease. When the knob is on the right end, left channel will be off. While on the left end, the right will be off. 10 13 8 PEAK The peak level indicator will lights up when the clip level exceeds +10dB. 0 -3 -6 9 MAIN -10 Press main channel control for main volume signal output. -20 -30 - PFL 10 SUB 7/8 Press SUB channel control for signal output from SUB signal line. 3 Professional mixer 7/8 11 CHANNEL ADJUSTMENT FADER STEREO For performance harmony, adjust this fader to control total channel signals from MAIN and SUB. L R 12 PFL 7 L You can monitor the output condition from this channel by headphone when pressing this control. MONO R 8 INPUT -10 +4 0 -15 +15 0 -15 LOW +15 5 0 AUX1 10 5 0 AUX2 10 5 0 EFF 10 5 L5 HIGH PAN 11 5R PEAK MAIN +6 SUB +3 0 -3 -6 -10 -20 11 -30 - PFL 12 13 7/8 4 Professional mixer MAIN CONTROL SECTION 1 2 1 2 3 1 3 2 L R AUX2 SUB1 SUB2 AUX1 4 3 AUX1 0 5 AUX2 5 5 10 0 10 PHANTOM +48 6 1 Total output balanced connector of right/left channel (BALANCE) Pin 1= Ground Pin 2= Signal+ Pin 3= Signal2 Total output of main right/ left channel unbalanced connector (MAIN) Top= Signal Ring= Ground Hole=Sleeve 3 SUB1/SUB2 Top=Signal Ring=Ground Hole=Sleeve 4 AUX1/AUX2 The sound will be returned to the stage when this connector is connected to active monitor speaker or monitor amplifier. It can also help musician and actor to control or monitor the sound effect efficiently. 5 AUX1 AUX 2 Aux output level can be adjusted by this knob. 8 AFL 1-3 AFL 4-6 7 6 AFL Press this key can detect the AUX level and listen the AUX output signal THE LEVEL INDICATOR 9 LEFT RIGHT SUB1 SUB2 +6 +4 +6 +4 +2 +2 0 -2 -4 0 -2 -4 -7 -10 -7 -10 -15 -20 -15 -20 10 8 +48V PHANTOM POWER SUPPLY SWITCH (4-6) +48V PHANTOM POWER SUPPLY of No.4-6 channel can be controlled by this knob. PHANTOM POWER LEFT 1-3 4-6 PFL +6 +6 +3 +3 0 0 -3 -3 -6 -6 -10 -10 -20 -20 -30 -30 - - RIGHT 7 +48V PHANTOM POWER SUPPLY SWITCH (1-3) +48V PHANTOM POWER SUPPLY of No.1-3 channel can be controlled by this knob. SUB1 SUB2 9 MAIN VOLUME LEVEL DISPLAY (MAIN) Main volume VU level display (Two groups of 10 bands light beams in three colors) indicates the output level condition from right and left channels. To avoid the signal distortion, the output level could not exceed +4dB. 10 SUB CHANNEL LEVEL DISPLAY (SUB1 SUB2) SUB volume VU level display (Two groups of 10 bands light beams in three colors) indicates the output level condition from right and left channels. To avoid the signal distortion, the output level could not exceed +4dB. 5 Professional mixer 11 POWER INDICATOR 1 2 3 The machine is under working condition while the indicator is on. 1 2 3 12 +48V PHANTOM POWER SUPPLY INDICATOR (1-3) L R AUX2 SUB1 SUB2 AUX1 No. 1-3 channel and No. 7-9 channel have been connected to +48V phantom power supply when the indicator is on. 13 +48V PHANTOM POWER SUPPLY INDICATOR (4-6) No. 4-6channel and No. 10-12 channel have been connected to +48V phantom power supply when the indicator is on. AUX1 AUX2 5 5 14 PFL 0 10 0 10 The monitor signal line is working when the indicator is on. PHANTOM +48 AFL 1-3 AFL 4-6 15 MAIN OUTPUT SIGNAL FADER FOR LEFT AND RIGHT ( LEFT RIGHT) THE LEVEL INDICATOR LEFT RIGHT SUB1 SUB2 +6 +4 +6 +4 +2 +2 0 -2 -4 0 -2 -4 -7 -10 -7 -10 -15 -20 -15 -20 16 OUTPUT FADER FOR SUB1 AND SUB 2 OF SUB SIGNAL CHANNEL(SUB1 SUB2) SUB output level can be controlled by adjusting this fader. 13 PHANTOM POWER 1-3 Output level of main signal can be controlled by adjusting this fader. 4-6 PFL 14 12 11 15 LEFT +6 +6 +3 +3 0 0 -3 -3 -6 -6 -10 -10 -20 -20 -30 -30 - - RIGHT 16 SUB1 SUB2 6 Professional mixer 1 CTRL Connector for monitor speaker and amplifier connected from outside. SMALL-SIZED GROUP MIXERS L CTRL R 1 SEND REC L 2 R 6 AUXIN RETURN PHONES EFFECT 4 7 L PLAY 2 AUX IN Stereo input connector. It can also be connected with other audio signal input. R 5 3 PHONES Connected with stereo headphone, to monitor the condition of total output and input from each channel. 3 4 SEND Connected with input connector of external digital delayed equipments or effect equipments, output EFF signals. PROFESSIONAL MIXER M1002 5 -15 AUX TAPE +15 5 -15 PHONE LEVEL 0 EFF SEND 10 5 0 REPEAT 10 6 REC Connector for output signals from stereo recorder output; connected with recorder s record input. Able to record the output signals from mixer. 7 PLAY Connector for input signals from stereo recorder. Accept output signals from record or other audio equipments 10 5 0 DELAY 10 5 +6 9 +15 5 L5 8 5 RETURN Connected with output connector of external digital delayed equipment or effect equipment; accept return effect signals. PAN 5R MAIN +3 0 8 AUX TAPE Input level of Aux record input can be controlled by adjusting this knob. 9 PHONE LEVEL Monitor line and output volume of headphone can be adjusted by turning this knob. SUB 10 EFF SEND Output level of effect sound (the ratio of delayed and direct sound) can be adjusted by adjusting this knob. -3 -6 -10 -20 -30 - PFL EFFECT 7 Professional mixer 5 -15 AUX TAPE +15 5 -15 PHONE LEVEL 0 EFF SEND 10 10 5 0 REPEAT 11 10 5 0 DELAY 12 13 PAN Adjust this knob to control the level of right and left channels that is distributed from effect signals. 14 MAIN Press this knob, main output signals will be output with reverberation effect. 10 5 +6 9 12 DELAY Delayed time can be changed by adjusting this knob. +15 5 L5 8 11 REPEAT Return level can be controlled by adjusting this knob. PAN 15 SUB Press this knob, output signals from SUB channels will be output with effect sound. 13 5R MAIN 14 +3 15 0 SUB -3 -6 16 PFL Press this knob, signal level from reverberation effect channel can be monitored invidually. -10 -20 17 -30 - PFL 16 EFFECT 17 VOLUME FADER OF REVERBERATION EFFECT CHANNEL Volume level of final effect can be adjusted by this fader. 1 EXTERNAL POWER CONNECTOR Accept external power equipment, AV double 17V, 750mA. 2 POWER SWITCH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS:REISUE DE CHOC ELECTRIQUE NE PAS OUVRIR 1 2 8 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE Professional mixer Technical Specifications MODEL M-1002 M-1602 M- 2202 CONDITON Input Sensitivity Mic-60dBm line-20dBm Stereo Ch In-20dB Eff Send -10dBm Aux Send 0dBm Nominal output level Common Mode Rejection -70dB Output Voltage (mixer part) 8V Max -85dB S/N Ratio Less than 0.01% (at 1KHz) THD(1KHz Full Power) 20Hz-20kHz +/-3dB Frequency Response Headphone 7V/220 HI 15dB/12kHz MID 15dB/2.5k LOW 15dB/350kHz Parametric EQ Power consumption Aux in-20dB Aux Send-20dB Tape in-10dB 30W 50W AC220-240V/50-60Hz Power Supply 9