GLIMARPOL Sp. z oo
Transkrypt
GLIMARPOL Sp. z oo
GLIMARPOL Sp. z o.o. PNEUMATIC-PERCUSSION DRILL YT24/7655D THE DEVICE HAS BEEN AWARDED AN ATEX CERTIFICATE OF CONFORMITY ISSUED BY: CENTRE FOR THE MECHANISATION OF MINING INDUSTRY ,,KOMAG” NO. KOMAG/07/MD/ATEX/ST/36 This percussive pneumatic drill is intended for drilling in hard and medium rock. The drill may be deployed in underground pits of mining operations, including those exposed to the hazard of methane and/or coal dust explosion. Its structure facilitates mounting on the pneumatic support FT160A or P62 and operation in horizontal position. The drill operates at the pressure of 3 – 6.3 bar. A flush drilling system allows to remove borings. The drill YT24/7655D integrates cutting-edge technologies, thereby ensuring superior serviceability, whereas a limited number of spare parts reduces the costs of exploitation. The drill structure has been developed with a view to ensure the safety of the operator and the support is controlled from the drill bar. This gives the operator greater control over the device as there is no need to take the hands off the drill during operation. The innovative solution used translates to fewer hoses and, consequently, fewer valves and connections. The drill does not require and loose parts to be fitted onto the structure, a so-called base or foundation. The support is mounted directly onto the drill, and specifically on the horizontal bar that serves as the encasement of the drill, yielding a firmer and more stable structure. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. DANE TECHNICZNE TYPE YT24/7655D Supply pressure bar YT29A 3,0 ÷ 6,3 bar At the pressure of 3,5 ÷ 5,0 At the pressure of bar 3 4 5 6,3 bar 5 Percussion energy J 32 44 57 65 J 70 Air demand dm3/s 30 45 52 80 dm3/s 65 Percussion frequency Hz 28 30 31 32 Hz 37 Torque Nm 10 12 16 18 Nm 15 Flush drilling fluid pressure 1 bar lower than air supply pressure Air supply duct diameter mm 19 mm 25 Flush drilling duct diameter mm 13 mm 13 Drill bit diameter mm 32 ÷ 42 mm 32 ÷ 45 Max depth of drilling Ambient temperature Device handle Cylinder length Piston stroke Length Size Width Height Mass m °C mm mm mm mm mm mm kg 6 -30 ÷ +42 H22x108 70 70 668 232 202 24 m °C mm mm mm mm mm mm kg 5 -30 ÷ +42 H22x108 82 60 659 248 205 27 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PERCUSSIVE PNEUMATIC DRILL YT29A This percussive pneumatic drill is intended for drilling in hard and medium rock. The drill may be deployed in underground pits of mining operations, including those exposed to the hazard of methane and/or coal dust explosion. Its structure facilitates mounting on the pneumatic support FT160A or P62 and operation in horizontal position. The drill operates at the pressure of 3.5 – 5 bar. A flush drilling system allows to remove drilling debris. The drill YT29A integrates cutting-edge technologies, thereby ensuring superior serviceability, whereas a limited number of spare parts reduces the costs of exploitation. The drill structure has been developed with a view to ensure the safety of the operator and the support is controlled from the drill bar. This gives the operator greater control over the device as there is no need to take the hands off the drill during operation. The innovative solution used translates to fewer hoses and, consequently, fewer valves and connections. The drill does not require and loose parts to be fitted onto the structure, a so-called base or foundation. The support is mounted directly onto the drill, and specifically on the horizontal bar that serves as the encasement of the drill, yielding a firmer and more stable structure. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC SUPPORT FT160A THE DEVICE HAS BEEN AWARDED AN ATEX CERTIFICATE OF CONFORMITY ISSUED BY: CENTRE FOR THE MECHANISATION OF MINING INDUSTRY ,,KOMAG” NO. KOMAG/07/MD/ATEX/ST/36 By virtue of the application of cutting-edge solutions, the support structure shows exceptional ejection force and holddown pressure with a mass of up to 15kg. DANE TECHNICZNE TYPE Supply pressure Cylinder length Total length Minimum length Piston stroke Mass FT160A bar mm mm mm mm kg 3,0 ÷ 6,3 60 2910 600 1250 5,9-15 The support length is adjusted to suit the Client’s needs. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC LUBRICATORS TECHNICAL CHARACTERISTICS TYPE FY 500 FY 200A FY 500 FY 500 FY 500 Capacity [ml] 500 ml 200 ml 250 ml 500 ml 200 ml Mass [kg] 2,5 kg 1,2 kg 1,2 kg 2,5 kg 1,2 kg TECHNICAL CHARACTERISTICS TYPE CLG 10 CLG 30 BLG 30 Capacity [l] 1,3 l 1,3 l 1,3 l Joint diameter Air flow rate [l/s] [mm] 25 8-15 25 15-140 25 15-140 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC ROTATIONAL ANCHOR DRILL RIG OF THE GMP-KP RANGE Pneumatic anchor drill rigs GMP-KP serve to drill anchor bolt holes with the diameter of Ø27 – Ø44. Drilling may be performed at a deviation from verticality equal to 35 . Anchor drill rig is a portable device for drilling, mixing, anchor and cable mounting, etc. It is suitable for a host of various anchoring works in rock-cast tunnels, coal mine galleries and rockcoal galleries within the hardness range of 80 - 120 MPa (f 8-12). These devices are adjusted to works related to tunnel boring, mining, also in underground mining operation pits graded „a”, „b” or „c” in terms of coal dust explosion hazard. I M2 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. TECHNICAL CHARACTERISTICS GMP-KP-70 GMP-KP-90 I I GMP-KP-100 GMP-KP-110 GMP-KP-120 GMP-KP-130 GMP-KP-130L TYPE Supply pressure (MPa) Rated pressure (MPa) Water pressure (MPa) Actuator pressure (kN) Actuator ejection speed (mm/s) Maximum operational power (kW) Rotational speed (r/min) II III II III I II III I II II III I II III I II III 0,5 0,6-4,5 10 400 2.3 3.1 900 650 900 Full load torque(Nm) 160 230 180 230 Air consumption (m3/min) Noise level (dB(A)) 2.8 3.2 3.4 3.5 2.8 3 3.2 700 240 3.7 3.8 3600 1440 35 3030 1300 34 2550 1170 32 3600 1440 52 3030 1300 50 2550 1170 48 3620 1440 52 3050 1290 50 2550 1170 48 3600 1450 52 3030 1300 50 2550 1180 48 3650 1450 49 3050 1310 47 2570 1180 45 3590 1420 50 3020 1280 48 2540 1160 44 1450 48 3600 1290 46 3030 1100 2550 90 44 Maximum height* (mm) I 0,3-0,7 1.8 Mass of full Minimum equipment** (kg) height* (mm) III * The height values provided in the tables are standard values. Other height values may be fitted at the Client’s request. ** The device mass indicated includes the equipment, i.e., valves, connections, lubricator, filters, casings. The device itself along with the support and control panel is lighter by 8 kg. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC – PERCUSSIVE ANCCHOR DRILL RIG YSP 45 The device is intended for operation at coal mines, quarries, for tunnel boring and other works associated with blasting boring and ceiling anchoring. The drilling angle ranges from 60° to 90°. The machine is intended for drilling in hard and medium rock by means of devices with the diameter of Ø 34 mm – Ø 42 mm and drilling depth of up to 6 m. Pneumatic anchor drill rig YSP 45 may be deployed in underground pits of mining operations, including those exposed to the hazard of methane an/or coal dust explosion. The anchor drill rig may be further equipped with a lubricator type FY500 mounted in the air supply line. The anchor drill rig is also compatible with lubricators Atlas Copco of the range CLG. YSP 45 may be fitted with a flush drilling system and air blowing. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. TECHNICAL CHARACTERISTICS TYPE Mass YSP 45 Dimensions (L x W x H)* Cylinder length kg mm mm 44 1420x390x160 95 Piston stroke mm 47 Support holddown actuator stroke mm 750 Support holddown actuator diameter mm 74 Working pressure bar 4,0 - 6,3 J ≥ 73,5 przy 6,3 bar J ≥70 przy 5 bar J ≥57 przy 4 bar l/s ≤113,3 przy 6,3 bar l/s ≤83 przy 5 bar l/s ≤80 przy 4 bar Hz ≥46 przy 6,3 bar Hz ≥45 przy 5 bar Hz ≥42 przy 4 bar Nm ≥21 przy 6,3 bar Nm ≥18 przy 5 bar Nm ≥15 przy 4 bar Water pressure bar -1 bar ciśnienie zasilania powietrza Percussion energy Air demand Percussion frequency Torque Air supply duct diameter mm 25 Flush drilling duct diameter mm 13 Drill bit diameter mm 34-42 Ambient temperature C - 30 do + 50 Device handle mm 22x108 *Suport length at request. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC ROTATIONAL DRILL RIG WITH FLUSH DRILLING SYSTEM OF THE GMP –WOK RANGE These pneumatic drills are intended for boring in soft and medium rock and are equipped with a flush drilling system The drills are made of stainless steel and meet the standards set for application in zones endangered with coal dust and methane I M2 explosion. WOK-80/100 WOK-50 TECHNICAL CHARACTERISTICS Model Supply pressure Rated pressure Rotational speed Air consumption Noise level Power Mass MPa MPa r/min m3/min dB kW kg GMP-WOK-50 0.3-0.63 0.5 1900 2.2 90 1.6 8 GMP-WOK-80 0.3-0.63 0.5 950 3.5 95 2.8 11.5 Parameters provided for the rated pressure of 0.5 MPa. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GMP-WOK-100 0.3-0.63 0.5 650 3.5 95 3.0 14 GLIMARPOL Sp. z o.o. PNEUMATIC DRILL Pneumatic drill serves to bore holes with the diameter of fi 42mm in soft and medium rock. Incorporated in the device is the flush drilling system. This pneumatic drill conforms to the standards applicable for use within zones endangered with coal dust and methane I M2 explosion. TECHNICAL CHARACTERISTICS Catalogue code Supply pressure powietrzem Maximum flush drilling pressure Air consumption Power Maximum borehole diameter * Revolutions Filtration raterate Mass Connection air/water GMP – 42PN MPa MPa 0,4 – 0,6 0,6 M3/min-1 kW mm Nm µm kg mm 2,4 3,0 42 48 50 9 Js19/Js16 *Standard equal to 42 m, at reduced mode it is possible to deploy a drill bit with a diameter of 62 mm. Available at request. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC-PERCUSSIVE DRILL WITH JACK HAMMER OPTION Pneumatic drilling jack-hammers type BH 5 and BH 8 count among light-weight drilling jack hammers for boring blasting holes in rock-mass of various types and hardness not only in underground pits but also for road construction works and laying railway tracks, etc. The pneumatic drilling jack-hammers type BH 5 and BH 8 are made of the following basic parts, although the list is non-exhaustive: bar handle with lever, piston, cylinder with a cover and the drilling-percussive part. TECHNICAL CHARACTERISTICS Catalogue code GMP B5H GMP B8H GMP B8H3 Mass Dimensions [kg] 5 8,4 8,4 [mm] 475x405 150x420 150x420 Air consumptionn [m3min-1] 0,55 0,64 0,64 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl Device handle [mm] 19x50 19x82,5 22x82,5 Supply pressure [bar] 4-6 4-6 4-6 GLIMARPOL Sp. z o.o. PNEUMATIC DRILL FOR JOINERY WORKS Pneumatic drill serves to drill holes with the diameter of fi 20 mm in steel or other materials with a circular handle. Pneumatic drill is intended for applicable for use in zones endangered with I M2 explosion. TECHNICAL CHARACTERISTICS Catalogue code GMP – 20 PRVFe Supply pressure powietrzem MPa 3 0,4 – 0,6 -1 Air consumption M /min 0,8 Power Maximum drill bit diameter kW mm 0,5 20 Revolutions min 500 Supply pressure powietrzem µm 50 Air consumption kg 3 Power Mm Js10 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. ELECTRIC DRILL GMP-ER6 The hand-held electric drill ER-6 is intended for drilling in coal and rock with comparable hardness by means of spiral drilling bits topped with a hook with the diameter of the blade equal to 43 mm. The drill has a fire-proof structure and may be deployed in underground mining operations and other objects endangered with the explosion of methane in zones graded "a", "b" and "c" as well as A and B grade of coal dust hazard explosion. The drill is manufactured to in the following types: ER-6, ER-6/4, suitable for the following voltage: ER-61 (3x127V), ER-62 (3x220V),as well as ER-61/4 (3x127V), ER-62/4 (3x220V), ER-6...U is also available with percussive heads that assist in the drilling process. TECHNICAL CHARACTERISTICS TYPE GMPER61/4 kW 1,55 1,55 1,55 kW 1,1 1,1 1,1 V 127 220 127 Hz 50 50 50 0,86 0,86 0,86 A 81 47 81 4 4 4 0,72 0,72 0,72 F F F Obr/min 610 610 400 Nm 17,5 17,5 26,6 S2+30min S2+30min S2+30min IP-54 IP-54 IP-54 Ex d l Ex d l Ex d l GMP-ER61 GMP-ER62 Rated power Motor rated power Supply voltage Frequency Cos φ Rated current Tuple of start-up current Serviceability Insulation grade Rotational speed Torque at drilling bit Operation Casing protection grade Fire resistant designation Mass of the drill without the duct Ambient temperature Percussion frequency GMPGMPER62/4 ER6…U 1,55 1,55 1,1 1,1 220 127 ; 220 50 50 0,86 0,86 47 81 ; 47 4 4 0,72 0,72 F F 400 610 26,6 17,5 S2+30min S2+30min IP-54 IP-54 Ex d l Ex d l kg 15,5 15,5 16,5 16,5 19,2 ˚C Ud/min 0÷40 - 0÷40 - 0÷40 - 0÷40 - 0÷40 6100 The parameter values may deviate by no more than +/- 5% from the nominal values. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC DRILL Y19A , Y26 Hand-held drills Y19A, Y26 mainly serve to drill in small quarries, coal mines, during road and building construction works. Incorporated in the Y26 are lubricators. Both standard drill types are available with air blowing and flush drilling system. They may be used in conjunction with a support FT100A or perforators for multiple function drilling. TECHNICAL CHARACTERISTICS TYPE Y19A Y26 Mass 19 kg 26 kg Air demand at 5 bar 43 l/s 50 l/s Length 600 mm 650 mm Diameter of drilling 32-42 mm 32-42 mm Piston stroke 54 mm 70 mm Device handle 22 x 108 mm 22(25) x 108 mm Percussion frequency at 5 bar 35 Hz 27 Hz Rotational speed 200 obr/min 280 obr/min Air duct internal diameter 19 mm 19 mm GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC SCERWDRIVERS Standard equipment of pneumatic devices in casing made of a dedicated „anti-spark” alloy and antistatic composite material allows for the application of the said devices for industrial purposes in Zone 1 or in mines exposed to methane explosion. These devices are supplied with the certificate EX I M2c IIB 95° CX and EX II 2GDc IIB 95° CX under the Directives 94/9/EC and 1999/92/EC. Such devices are likely to be deployed in mining and petrochemical industry as well as elsewhere whenever explosion hazard is an issue. „TWIN HAMMER” - A dedicated structure of the percussive mechanism consisting of a dual hammer. - Higher efficiency as opposed to other percussive mechanisms. - automatic lubrication - only four loose parts - ease or repair and maintenance - balanced short-term percussion Rotation adjustment 1/2” GMP 1-816 A 60-540 816 9500 1250 2,0 180 1/4” 10 3/4” 1” GMP 1-1620 GMP 1-1620/1 A A 270-1220 270-1220 1820 1820 7250 7250 1175 1175 3,2 3,2 208 208 3/8” 3/8” 13 13 1” GMP 1-2030 B 670-1480 2020 6600 750 10,8 286 1/2" 19 1” GMP 1-2710 B 12602170 2710 5000 950 12,9 311 1/2" 19 . GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC SCREWDRIVERS Available in composite anti-static casing. Awarded marketing authorizations I M2 II 2G IIB T4 II2D 135°. Eligible for operation underground pit conditions. Low mass, potent percussion and low vibration level ensure user comfort and safety during operation in explosion hazard zones. TECHNICAL CHARACTERISTICS Catalogue code Core Percussion Torque Max moment Velocity Mass Length Vibration level Noise Air consumption GMP 2-815 M16 ½’ 1085 Nm 300-680 Nm 7400 RPM 2.00 kg 191 mm 16 l/s 16mm ¼’ I M2 II 2G IIB T4 II2D 135° GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GMP 2-820 M22 ¾’ 1490 Nm 350-920 Nm 4500 rpm 3,8 kg 240 mm 20 l/s 16 mm ¾’ GLIMARPOL Sp. z o.o. PNEUMATIC SCREWDRIVERS Pneumatic screwdrivers PSR 24Fe and PSR 36Fe serve to loosen and tighten threaded connections in mines and in heavy industry. Torque is achieved by means of vane motor transferring torque onto percussive mechanism. The pneumatic screwdriver type PSR65Fe serves to screw or unscrew bolts and caps in the mining industry, smelter operations, power plants, etc. Torque is reached by means of pneumatic motor with a percussive mechanism. Pneumatic percussive Screwdrivers meet the set criteria under PN-EN 1127-2 applicable to operation under the circumstances of IM2 explosion hazard. PSR 65Fe TECHNICAL CHARACTERISTICS Model Working pressure Maximum torque Air consumption End core Filtration rate Size (width x length) Mass Inlet hose PSR 24Fe [MPa] [Nm] [m3min-1] [mm] [µm] [mm] [Kg] [Mm] 680 1,1 ¾” 211 x 161 5,5 Js10 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl PSR 36Fe 0,4-0,6 2100 2 1” 50 190 x 335 11 Js16 PSR 65Fe 4068 1,2 1 ½” 161 x 368 19 Js19 GLIMARPOL Sp. z o.o. HYDRAULIC PERCUSSIVE WRENCH Hydraulic impact wrench for screwing and unscrewing bolts requiring high moment. The application of wrenches by and largely facilitates and serves to either tighten or loosen bolts with high torques. The application of wrenches greatly facilitates operation in terms of both ease and time of heavy-duty machines, railway track works, the erection and dismantling of large size steel structures, etc. The application of wrenches in coal mining has greatly affected the improvement of efficiency and time-consumption of screwing and unscrewing lock bolts of gallery claddings. 1 kg hydraulic wrench has a much great power than wrenches with pneumatic or electric wrench. The percussive mechanism does not transfer loads onto the operator. Screwing/Unscrewing time amounts to 8-10 seconds. The wrenches are adjusted by means of torque. They may be supplies from independent power generators with a diesel drive, electric or hydraulic system drive. TECHNICAL CHARACTERISTICS Catalogue code GMP – 12HAX Mass [kg] 10 Core [Cal] 3/4 Torque [Nm] 340 - 1632 Cap size S19 - S60 Hose connection 8SAE Hose socket [cal] 3/8 Oil pressure [MPa] 7 - 14 Oil flow rate [l/min] 15 - 45 Optimal flow rate [l/min] 20 - 38 Maximum admisible pressure [Mpa] 15 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. HYDRAULIC CHAIN CUTTING CHISEL GMP-SR42 Chain cutting chisel SR 42 is a device for cutting chains with the diameter of up to 42 mm and flat chains of up to 46 mm. The cutting chisel may be connected to the central hydraulic system of 32 MPa or an independent pressure supply (hand-held/pedal hydraulic pump). The cutting chisel is controlled by means of a central hydraulic system three-way valve that may be based at any distance from the cutting chisel. TECHNICAL CHARACTERISTICS Catalogue code Working pressure Maximum shear force Maximum diameter of cut chain Maximum diameter of cut flat chain Maximum cut chain material strength Filtration rate Basic dimensions (diameter x length) Mass Mass of the cutting chisel with manual/pedal pump Connections GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl [MPa] [kN] [mm] [mm] [MPa] [µm] [mm] [kg] [kg] GMP - SR42 32 1200 42 46 1200 50 290 x 595 60 60 + 9 STEKO 10 GLIMARPOL Sp. z o.o. HYDRAULIC RAIL BENDER GMP-OKH 1 Hydraulic rail bender GMP-OKH 1 is a device for bending rails and profiles at angles of choice. Bending is performed by means of a hydraulic actuator powered by a hand-held hydraulic pump. The bender comprises a hydraulic actuator with a reverse spring and counter spring, frame with handles characterized with adjustable pull stirrup position. The pressure fluid source is tapped by means of a single connection. DANE TECHNICZNE TECHNICAL CHARACTERISTICS Working pressure Maximum bending force Working cylinder stroke Fluid volume per stroke Bent profiles Dimensions Mass Mass with hand-held pump Connections GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GMP – OKH1 [MPa] 70 [kN] 320 [mm] 150 3 [cm ] 32 Kolejnice: Xa; 115/24; 93/18 [mm] 870 x 440 x 180 [kg] 59 [kg] 59 + 15 STEKO 10 GLIMARPOL Sp. z o.o. PNEUMATIC SLUDGE PUMP The pump is intended for water, impurity and sludge removal with particle contaminants of up to 25 mm in diameter. It may also be applied for operation with marine water or corrosive chemical substances. Pump characteristics: • High efficiency. • Working element – Venturi nozzle – no engine or membrane. • Noise damper. Working pressure 6.2 bar Lifting height [m] 7,6 15,2 55,9 30,4 45,7 53,3 Flow rate [l/min] 341 295 257 227 182 136 CAUTION: The pumps must not be deployed with flammable substances. TECHNICAL CHARACTERISTICS Working pressure 6,2 bar. Air demand 40 l/s [2,4 m3/min] Catalogue code Max. sucking height [m] GMP 3-77 6,10 Min. lifting height podnoszenia [m] 6,10 Diameter Of fluid outlet joint [mm] 62,5 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl Recommended diameter of feed hose Mass [kg] 25 69 GLIMARPOL Sp. z o.o. PNEUMATIC MULTIPLIER GMP-MP20 Pneumatic multiplier type GMP-MP20 serves to irrigate coal deposits under high pressure in order to suppress dust content. Pneumatic multiplier type GMP-MP20is either a single or double-piston pump with a handle for easy operation at the workpost. The multiplier is made of stainless steel and meets criteria set for I M2 grade facilities exposed to methane or coal dust explosion danger. Diagram TECHNICAL CHARACTERISTICS: Catalogue code Working pressure of air supply Input water pressure Output water pressure at the supply pressure of 0.5 Air consumption [MPa] [m3h-1] 16,4 Water efficiency at the pressure of 0.5 MPa Filtration rate Dimensions Mass Diameter of the outlet hose [l.min-1] [µm] [mm] [kg] [mm] 7 50 450 x 280 x 280 50 16 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GMP – MP20 [MPa] 0,4 – 0,5 [MPa] 0,5 GLIMARPOL Sp. z o.o. PNEUMATIC CHAIN LIFTING MACHINES TYPE GMP-LLA LLA250 EX is a lifting gear with an amenable size and weight. It may be fixed or mounted on a cart. The lift gear is suitable for operation in dusty, hazardous, moist or hot environments. The lift gear may be operated via three methods: either directly, by overhung control panel or mechanically. Features and advantages - Solid, compact casing - ATEX certificate, grade Ex ll 2G T5 llB D100°C - Ease of installation anywhere, even in scarce spaces Maximum load capacity Model GMP-LLA 200 EX GMP-LLA 250 EX GMP-LLA 500 EX GMP-LLA 1000 U GMP-LLA EX*1000 EX GMP-LLA 2500 EX GMP-LLA 5000 EX No lubrictor GMP-LLA 200L EX GMP-LLA 250L EX GMP-LLA 500L EX GMP-LLA 1000L U GMP-LLA EX* 1000L GMP-LLA EX 2500L GMP-LLA EX 5000L EX low Under kg 200 250 500 100 100 0 250 0 500 0 0 200 250 500 100 100 0 250 0 500 0 0 A Lifting speed at full load Loops chain Weight without chain Weight chain The required length of chain / meter ton m/min ft/min qty kg lb kg/ml b/ft 0,2 0,2 0,5 5 1,0 1,0 2,5 5,0 20,2 18,6 12,6 6,3 6,3 3,2 1,6 66,3 61,0 41,3 20,7 20,7 10,5 5,2 1 28,0 28,0 28,0 32,0 32,0 93,7 144,4 0,9 0,9 0,9 0,9 0,9 2,9 2,9 0,6 0,6 0,6 0,6 0,6 1,9 1,9 Lifting height + 0,5 1 2 2 1 2 12,7 12,7 12,7 14,5 15,0 42,5 65,5 0,2 0,2 0,5 5 1,0 1,0 2,5 5,0 20,2 18,6 12,6 6,3 6,3 3,2 1,6 66,3 61,0 41,3 20,7 20,7 10,5 5,2 1 1 1 2 2 1 2 12,7 12,7 12,7 14,5 15,0 42,5 65,5 28,0 28,0 28,0 32,0 32,0 93,7 144,4 0,9 0,9 0,9 0,9 0,9 2,9 2,9 0,6 0,6 0,6 0,6 0,6 1,9 1,9 Lifting height + 0,5 B C Lifting height + 0,5 Lifting height + 0,5 2x Lifting height + 0,5 2x Lifting height + 0,5 Lifting height + 0,6 2x Lifting height + 0,9 Lifting height + 0,5 Lifting height + 0,5 2x Lifting height + 0,5 2x Lifting height + 0,5 Lifting height + 0,6 2x Lifting height + 0,9 D ceilings mm in mm in mm in mm in GMP-LLA 200/250 GMP-LLA EX 500 EX GMP-LLA 1000 U GMP-LLA EX*1000 EX GMP- LLA 2500 GMP-LLA EX5000 EX 377 377 445 495 575 785 14, 14, 8 17, 8 19, 5 22, 4 30, 6 9 122 122 122 122 212 249 4,8 4,8 4,8 4,8 8,3 9,8 390 390 390 390 546 546 15,4 15,4 15,4 15,4 21,5 21,5 29 29 29 29 50 60 1,1 1,1 1,1 1,1 2,0 2,4 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl soun d level air consumption hose Size The air intake dB(A) l/s cfm mm in BSP 84 84 83 83 83 79 79 38 37 38 38 38 40 40 81 78 81 81 81 85 85 1/2 1/2 1/2 1/2 1/2 3/4 3/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 84 84 83 83 83 79 79 38 37 38 38 38 40 40 81 78 81 81 81 85 85 12, 12, 5 12, 5 12, 5 12, 5 20, 5 40, 0 0 12, 12, 5 12, 5 12, 5 12, 5 12, 5 12, 5 5 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 GLIMARPOL Sp. z o.o. CARTS TYPE GMP-TLT GMP-TLT is a manually operated cart with a load lifting capacity of up to 1000 kg. It is compatible with a beam of the diameter of 50-160 mm. The cart ensures horizontal mobility. With its antiexplosiveness, elasticity and ease of installation, it is suitable for both parallel or tapered win beams and readily adaptable to variable width. Features and advantages - Firm compact structure - ATEX certificate, grade Ex ll 2G IIB T5 D100 ° C Maximum velocity at full loading Air consumpti on Bundle width ton m/ min ft/ min l/s cfm mm 1 1 3 3 - - - - 1 1 3 3 5 45, 45, 9 58, 9 58, 4 53, 4 1 in 2,1 2,1 3,1 3,1 50-160 16174-180 280 181300 50-160 16174-180 280 181181300 300 in 8,3 2,1 2,1 3,1 3,1 3,7 Maximum efficiency Model Hand-held GMP-TLT 1000 GMP-TLT H N 1000 GMP-TLT H W 3000 GMP-TLT H N 3000 With drive HW GMP-TLT 1000 GMP-TLT M N 1000 GMP-TLT M W3000 GMP-TLT M N 3000 GMP-TLT M W5000 M Hand-held GMP-TLT 1000 GMP-TLT H N 1000 GMP-TLT H W 3000 GMP-TLT H N 3000 With HW drive GMP-TLT 1000 GMP-TLT M N 1000 GMP-TLT M W3000 GMP-TLT M N 3000 GMP-TLT M W5000 M kg 100 100 0 300 0 000 300 0 100 100 0 300 0 300 0 500 0 0 A m 26 m 26 35 35 in 1,1 1,1 1,4 1,4 14 14 17, 17, 8 16, 8 2B m 52 m 52 78 78 24 24 37 37 41 1,0 1,0 1,5 1,5 1,6 52 52 78 78 93 in Minimum radius mm 2-6,3 1250 6,3-11 1250 2,9-7,1 2200 7,12200 11,8 4 8,5 2-6,3 1250 4 8,5 6,3-11 1250 42 89 2,9-7,1 2200 42 89 7,12200 42 89 11,8 7,12500 C 11,8 D mm mm in 212 bundle width bundle width +57 +2,3 262 10,3 bundle width bundle width +89 mass in kg lb 50 50 86,6 86,6 9,4 10,7 31,5 34 21 23,6 69,5 75 50 50 86,6 86,6 98,4 E mm 264 264 384 384 11 12,3 48 51,5 74 in 10,4 10,4 15,2 15,2 24 27,1 105,8 113,5 163,2 F m in m - 264 264 380 380 437 10,4 10,4 15,0 15,0 17,2 94 94 59 +3,5 212 8,3 bundle width +57 262 bundle width +2,3 10,3 bundle width +89width bundle +97 bundle width +3,5 bundle width +3,8 225 225 148 148 166 8,9 8,9 5,9 5,9 6,6 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl 3,7 3,7 2,4 GLIMARPOL Sp. z o.o. PNEUMATIC HOISTS GMP-CPA The engine of this model has an in-built brake option for an unlimited start-up number and operation times. The hoist GMPCPA stands out by an extremely low noise emission upon operation. The scarce casing and low weight of the model contribute to its ease of operation and transportation. GMP-CPA has a wide application in various industries such as automotive, varnish-related, paper, textile, smelter, food, chemical, road-related, machine, furniture industries, in refineries, shipyards, power plants, foundries, hardening shops, cement plants, dairy plants, printing works, for aircraft manufacture, galvanization, on ships, oil rigs and at sawmills. TECHNICAL CHARACTERISTICS Lifting speed at Lifting speed without nominalloading* loading * TYPE GMP CPA 1-15 GMP CPA 2-8 GMP CPA 5-10 GMP CPA 10-5 kg 125 250 500 990 1 1 1 1 m/min 15 8 10 5 Air Lowering speed at consumption at nominalnym Power nominal obciążeniu* silnika loading m/min 40 20 20 10 m/min 30 16 18 10 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl 3 m /min 0,5 0,5 1,2 1,2 kW 0,4 0,4 1,0 1,0 Mass at standard lifting height (3 m) kg 9,5 10,5 21 23 GLIMARPOL Sp. z o.o. INDUSTRIAL PNEUMATIC HOISTS 250kg – 2tons Hoists with CE marking (under EU directives) are standardly supplied with a circuit breaker and a cut-off valve at air supply line as well as a standadised control panel. All pneumatic hoists are supplied with an ATEX certificate for the zone 2 Ex II 3 GD c IIB 135˚C X. Hoists with an additional anti-explosive protection in compliance with z ATEX for zone1: Ex II 2 GD c IIB 135˚C X. PNEUMATIC HOIST WITHOUT LUBRICATION Driven by unique toothed engines, renowned for their durability, reliability and limited requirements, also in contaminated environments, proven operation in mining and navy. Smooth operation achieved also without air supply lubrication. Only two loose parts, made of high-resistant composite material. Clean air at engine exhaust. Cost-efficient installation/maintenance (no need to replenish forgotten inaccessible lubricators). Suitable for „clean zones” in food processing, textile industry, wherever oil use is inadmissible. Safe under random maintenance regime. INDUSTRIAL HOISTS PNEUMATIC with paddle engine TYPE GMP 250KS GMP 250K GMP 500KS GMP 500K GMP 1000KS GMP 1000K GMP 1500K GMP 2000K GMP 3000K GMP 4500K GMP 6000K 1 1 1 1 2 2 1 2 2 3 4 GMP 250KR GMP 500KR GMP 1000KR 1 2 1 Capacit when the load without load weigh weight toin] down top down [kg] 1m y (kg) t na 250 12 31 21 16 22 [m/mi [m/mi [m/min wys. 250 31 36 52 30 22 0,8 n] n] [podn/ 500 6,7 20 13 10 22 0,8 kg] 500 17 30 32 18 22 0,8 980 3,4 10 6,7 4,9 28 1,6 980 9 15 16 9 28 1,6 1500 4,9 7,9 8,5 4,9 38 2 2000 4,0 5,5 6,1 4,0 57 4 3000 2,4 4,0 4,3 2,4 59 4 4500 1,4 3,0 3,2 2,0 89 6 6000 1,0 2,3 2,6 1,5 113 8 HOISTS WITH AN ADDITIONAL ANTIEXPLOSIVE PROTECTION 4) 250 7,9 11,6 12,8 9,1 22 0,8 500 4,0 6,1 6,4 4,6 28 1,6 1000 7,9 11,3 12,2 7,9 38 2 clearance with 3) 457 hook 3) 457 [mm]3)3 457 457 3) 457 3) 457 3) 470 584 635 784 918 clearance with trolley 457 3) 457 3) 457 3) 457 3) 457 3) 457 3) 479 3) 549 3) 575 3) 711 3) 817 3) 457 3) 457 3) 470 3) 457 3) 457 3) 460 3) Carts without drive, with hand-held drive or pneumatic drive, with an adjustable range or inter-rail spacing 83-152 mm (standard) or 152-305 mm (wide). Minimum turning radius of 1067 mm. Pneumatic carts with a maximum speed of. 27 m/min. (with the capacity of 1ton) or 24 m/min. (2tons). GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. HAND-HELD HOIST WITH RATCHET LEVER WITH GMP-UNOplus ATEX Hand-held lever hoist with ratchet GMP-UNO plus ATEX End-bearing capacity ranging 750 kg - 6000 kg Universal lifting device for lifting, pulling and safe maintenance of loads. It is compact, potent and extruded of structural steel. These advantages along with a low mass are the features of UNOplus ATEX, a universal portable device. Equipment and features - Forged lifting and bearing hooks, made of wear-resistant steel alloy, subjected to high-temperature processing, do not break upon overloading but yield slowly. - Chain of steel alloy, galvanized in compliance with national and international standards and regulations. - Solid roller guide rail, eliminating blockage and bearing chain jamming. - Solid bumper at chain end. - Once unloaded, the chain may be loaded again. - Hand-held lever with an ergonomic rubber handle and optimally positioned bearing mount in the casing cover. - Low effort upon operation by virtue of optimal gear. - Automatic screw-disc brake made of anti-corrosive material. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. TECHNICAL CHARACTERISTICS Model UNOplus ATEX EAN-No. 4025092 750 1500 3000 6000 “168342 “168359 “168366 “168380 Bearing capacity kg 750 1500 3000 6000 Number of strands of chain 1 1 1 2 Pitch chain dxp Increase for one full rotation of the lever Manual force at nominal load mm 20 22 17 9 daN 20 35 40 40 mm 6 x 18 8 x 24 10 x 30 10 x 30 DIMENSIONS: Technical characteristics of the model UNOplus ATEX End-bearing capacity Chain pull count Chain bar scale dxp Full lever rotation for lifting Hand-held force at nominal loading Weight at standard lifting weight GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl Own weight with standard lift height (1,5 m) kg 7,2 12,5 21,5 32,0 GLIMARPOL Sp. z o.o. CHAIN LIFT Hand-held chain lift with a lifting hook or an integrated cart for hand-held operation or a with a cog gear. End-bearing capacity from 500 kg to 20000 kg Applicable almost in all industry branches, including chemical. The devices are suitable for operation in explosion hazard zones. On account of high risk for the operators and valuables, there are extremely strict guidelines and technical requirements in place in explosion hazard zones. Hand-held chain hoist shows resistance to ambient factors, by far exceeding the standards set for classic hand-held chain hoists. Under the EU Directive 94/9/EC, the models of this range have been further developed for use in explosion hazard zones (ATEX zones). Of significance in explosion hazard zones, especially for hand-held hoist gear, is the brake temperature. The tests show a considerable temperature increase upon load lowering. Once all ignition hazards have been analysed, upon intensive testing, a dedicated brake cooling casing body have been introduced. The explosion-resistant hoists is graded thus: II 2 GD c IIB T4 T 125°C X II 2 GD c IIB T3 T 145°C The test certificates are available on body designation (0035) TECHNICAL CHARACTERISTICS Catalogue code bearing Hand-held chain Pull count Chain bar scale capacity pitch at 1 m lifting kg GMP 500Y 500 GMP 1000Y 1.000 GMP 2000Y 2.000 GMP 3000Y 3.000 GMP 5000Y 5.000 GMP 10000Y 10.000 GMP 20000Y 20.000 1 1 1 1 2 3 6 d x t mm 5 x 15 6 x 18 8 x 24 10 x 30 10 x 30 10 x 30 10 x 30 Pull force upon nominal loading Mass at standard lifting height (3 m) daN 21 30 32 38 34 44 2 x 44 kg 9 13 20 29 38 71 196 m 30 49 71 87 174 261 522 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. Features Stainless steel handheld chain Applications Paint manufacturers, varnish manufacturers, foundries, installation/removal of supports (construction industry), refineries, oil storage equipment, automotive industry, galvanization shops, ships, shipyards, printing works, textile industry, paper industry, food processing, glass works, ceramic works, timber storage, sawmills and thermal processing works, etc. Galvanized lifting chain Anti-corrosive layer protection Brake Atex Copper-plated lifting and bearing hooks. Solid bronze cart wheels Cart rubber bumbers Identyfikacja II 2 GD c IIB T4 T 125°C X II 2 GD c IIB T3 T 145°C Sign explosion protection II 2 GD c IIB T4 (T3) T125ºC X Classification II surface without recesses G gas Type security safe design Temperature class maximum surface temperature at which the gas can occur Particular specification proper operation Classification II surface without recesses G gas Type security safe design Temperature class maximum surface temperature at which the gas can occur category 2 zone 1 and 2, respectively, 21 and 22 zone D dust gas group only for devices used in areas where explosive gas atmospheres (eg, ethylene) The surface temperature of the maximum surface temperature at which dust can occur category 2 zone 1 and 2, respectively, 21 and 22 zone D dust gas group only for devices used in areas where explosive gas atmospheres (eg, ethylene) The surface temperature of the maximum surface temperature at which dust can occur GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. CHAIN LEVER HOISTS WITH HAND-HELD DRIVE RZC, RZV Chain lever hoists with a hand-held drive are comprehensive tools for erection and renovationworks. They have been admitted by the State Mining Authority for use in underground mining operations. The device features a compact casing and steel metal sheet protective shields. Easy to operate and install. Low drive force upon nominal load. Rotating hooks (loading hook and fastening hook) with protective elements. A brake safeguarding against inadvertent load lowering. TECHNICAL CHARACTERISTICS Typ End-bearing capacity Maxstrength at lever RZV 0,8 RZV 1,6 RZV 3,2 RZV 5 RZC 0,8 RZC 1,6 RZC 3,2 RZC 5,0 RZC 6,3 t 0,8 1,6 3,2 5 0,8 1,6 3,2 5 6,3 N 400 370 370 440 400 370 400 300 400 Roller Galla Roller Galla Roller Galla Roller link-type link-type link-type link-type link-type 1,5 9,4 1,5 16,5 1,5 24 1,5 41 1,5 8,1 1,5 15,5 1,5 21 1,5 34 1,5 40 Chain type Basic lifting capacity m Mass kg GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. CHAIN LIFT GEARS Z 100, Z 110 Multi-roller chain hoists type Z100, Z110 (hereafter called hoists) comprise a body with a hook, a gear mechanism, cog wheel for load lifting fitted with a hook and a manual control chain. The hoists serve for vertical lifting or lowering, they are easy to use: - in non-heavy-duty environments - when no energy source is available - in environments exposed to gas or coal dust explosion in underground mining pits. TECHNICAL CHARACTERISTICS Type Z 100 Z 110 End-bearing capacity(t) 0,5 1 1,6 1/3,2 5 7,5 10 0,125 0,25 Control strength 300 350 320 400 330 480 400 230 250 chain hand-held Bearing chain ø 4 x 20 ø 5 x 15 ø 5 x 15 ø 9 x 27 ø 11 x 31 ø 9 x 27 ø 11 x 31 ø 11 x 31 Ø 3 x 14 Ø 3,6 x 15,5 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl Mass (kg) Basic lifting load (m) 10 14 25 36,5 50 70 85 3,6 4,8 3 3 3 3 3 3 3 2 2 GLIMARPOL Sp. z o.o. LIGHT-AND MEDIUMWEIGHT PNEUMATIC JACK HAMMERS RANGE GMP-MP LIGHT- AND MEDIUM- WEIGHT PNEUMATIC JACK HAMMERS RANGE GMP-MP Pneumatic jack hammers of the range GMP-MP are ergonomic, standard jack hammers with a potent percussive power. They are intended for operation in coal mines, quarries, for tunnel boring and other works associated with trimming in vertical or horizontal position. The jack hammers are intended for trimming in hard rock, plaster, concrete, brickwork, etc. , by means of suitable tools. Jack hammers of the range MP are suitable for riveting and supplied with riveting gear. GMP-MP C6 Pneumatic jack hammers of the range GMP-MP may be deployed in underground pits of mining operations, including those exposed to either methane and/or coal dust explosion. GMP-MP M… GMP-MP G7 TECHNICAL CHARACTERISTICS Type GMP MP G7 7,2 – 8,0* 465 35 120 4-6 ≥ 23 ≥ 30 ≤ 20 ≤ 15 ≥ 20,0 ≥ 21,6 GMP MP G10 9,2 - 10,6* 575 38 150 4–6 ≥ 32 ≥ 39 ≤16 ≤ 20 ≥ 15,0 ≥ 16,5 GMP MP M16 7,5 416 30,2 203 4-6 ≥ 39 ≥ 43 16,2 15 ≥ 20,0 ≥ 21,0 GMP MP M22 9,5 507 30,2 250 4-6 ≥ 40 ≥ 46 ≤ 16 ≤ 15 ≥ 19,0 ≥ 18,0 GMP MP M28 10,5 560 30,2 279 4-6 ≥ 48 ≥ 52 16,2 15 14,5 15 16 19 19 16 16 19 - 30 + 50 R17,3x60 - 30 + 50 R26 x 80 - 30 + 50 R 25 x 75 - 30 + 50 R31x70 - 30 + 50 R31x70 - 30 + 50 R31x70 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GMP-MP G10 Mass [kg] Length [mm] Cylinder length [mm] Hammer stroke [mm] Working pressure [bar] Percussion energy at 4 bar [J] Percussion energy at 5 bar [J] Air consumption at 4 bar [l/s] Air consumption at 5 bar [l/s] Percussion frequency at 4 bar [Hz] Percussion frequency at 5 bar [Hz] Recommended diameter of the hose [mm] Working temperature [ºC] Size of device [mm] GMP MP C6 5,6 – 6,2* 345 25 100 4-6 ≥ 14 ≥ 16 ≤ 12,2 ≤ 11,7 ≥ 28,5 ≥ 30,8 GLIMARPOL Sp. z o.o. HEAVY PNEUMATIC JACK HAMMERS OF THE RANGE GMP-MP Pneumatic jack hammers B70 and B90 are strong heavy devices that serve to crush concrete, asphalt, hard and very hard rock and brickwork by means of suitable tools. Jack hammers GMP-MP B70 and B90 are integrated with air lubricators. Jack hammers B90 are lighter than B70, prove adequate for lighter-duty works requiring lower crushing strength. TECHNICAL CHARACTERISTICS Type Dimensions Mass without damper Cylinder length Working pressure Max working pressure Percussion energy [6 bar] Percussion energy [5 bar] Frequency impact [6 bar] Frequency impact [5 bar] Air consumption [6 bar] Air consumption [5 bar] Internal diameter of the hose mm kg mm Bar Bar J J Hz Hz l/s l/s mm GMP MP B70 745x496x162 34 58 4-6 6 110 90 18 17 43 37 19 GMP MP B90 725x496x162 29 52 4-6 6 72 58 18 17 30 24 19 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC LINEAR SAW PPP 300 (reciprocating saw) Linear pneumatic saw type PPP 300 serves to cut metal materials that are difficult to access. The operator team should use a coolant emulsion upon material cutting. Linear pneumatic saw type PPP 300 does not contain light-weight metals and thus may be deployed in zones exposed to explosion hazard. TECHNICAL CHARACTERISTICS Catalogue code Working pressure PPP 300 MPa Maximum power kW Air consumption Feed rate of strip Filtration rate Tape speed Mass 3 m min mm µm -1 min kg Inlet hose mm 0,4 – 0,6 1,1 -1 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl 1,2 65 50 380 12,4 19 GLIMARPOL Sp. z o.o. PNEUMATICZNA CHAIN SAW SH 150-180BX Pneumatic chain saw type SH 150-180BX (hereafter referred to as the saw) is hand-held, intended exclusively for cutting wood. The maximum length of guide strip amounts to 350 mm. The maximum cutting diameter shall not exceed 340mm (upon unilateral cutting) or 690 mm (upon bilateral cutting). The saw is not intended for felling or pruning trees in forest environment. The saw is composed of a control handle, fitted with a protective shield at the bottom, a body with lamellar engine, strap brake, lubricating device, strip with a brake and shielded handles. As the entire body of the pneumatic saw is made of steel, it is possible to deploy the saw in explosion hazard environment. TECHNICAL CHARACTERISTICS Catalogue code Working pressure Maximum power Air consumption Length of strip Filtration rate Cutting speed Mass Inlet hose SH 150-180 BX MPa kW 3 -1 m min mm µm -1] [m/s kg mm GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl 0,4 – 0,6 1,1 0,9 350 50 1,8 7,6 19 GLIMARPOL Sp. z o.o. PNEUMATIC TAPE SAW PPP 120, PPP 160, PPP 180 Pneumatic tape saw type PPP 120, PPP 160 i PPP 180 serves to cut metal materials that are difficult to access. The operator team should use a coolant emulsion upon material cutting. Pneumatic saw type PPP 300 does not contain light-weight metals and thus may be deployed in zones exposed to explosion hazard. TECHNICAL CHARACTERISTICS Catalogue code Working pressure Maximum power Air consumption Cut material size Filtration rate Cutting strip speed Mass PPP 120 MPa kW 3 -1 m min mm µm -1 m/min kg PPP 160 0,4 – 0,6 0,7 0,9 120 x 150 10 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl 160 x 150 50 65 10,2 PPP 180 1 180 x 180 13 GLIMARPOL Sp. z o.o. HYDRAULIC TAPE SAW PHP 120, PHP 160, PHP 180 Hydraulic saw PHP 120, PHP 160 i PHP 180 is a cutting tool suitable for application in challenging environments. Hydraulic tape saw PHP does not contain light-weight metals and thus may be deployed in zones exposed to explosion hazard. TECHNICAL CHARACTERISTICS Catalogue code Working pressure Maximum power Cut material size Filtration rate Cutting tape speed rate Mass PHP 120 MPa kW mm µm m/min kg 120 x 150 10 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl PHP 160 7 - 23 2 160 x 150 125 65 10,5 PHP 180 180 x 180 13 GLIMARPOL Sp. z o.o. HYDRAULIC AUGERS GMP-HWK type hydraulic augers serve to drill boreholes. They are deployed for drilling boreholes for drainage, demethanisation, geological surveying (for core sampling) and other drilling works. They may be operated in all positions and directions (± 90°) in hard coal mines. The entire hydraulic system is composed of a main frame, pumping station and operation panel. The array of the structure along with framed subsystems allows easy dismantling and transportation. TECHNICAL CHARACTERISTICS Model Depth of drilling Diameter of boreholes drilled without core drills Diameter of boreholes drilled with core drills Angle of drilling Rotational speed Torque Supply pressure Power Size Frame mass Pumps Control panel Mass of machine m mm GMP-HWK-75 75 50-75 GMP-HWK-150/100 150/100 75-110 GMP-HWK-300/100 300/100 75-200 mm 50-65 55-75 75-120 r/min Nm MPa kW mm kg kg kg kg +/- 45 0-250 220 14/8 11 2590x600x1030 102 300 402 +/- 90 0-150/0-300 660 16 15 1800x680x1300 430 328 50 900 +/- 90 0-300 2000 22 37 2180x800x1516 953 750 115 2000 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. PNEUMATIC DRILLING MACHINE TECHNICAL CHARACTERISTICS PARAMETER GMP-PWK-75 Supply pressure( MPa) Torque (N.m) Air consumption (m3/min) Power (kW) Rotational speed (r/min) Frame mass (kg) Column mass (kg) Drilling angle Depth of drilling (m) Diameter of drilling (mm) Dimensions (L×W×H) (mm) 0.4 240 6 3.9 480 0.5 300 10 6 500 0.63 330 11 8.0 550 150 200 ±30 75 76 - 82 2320x590x1500 GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. CORE BORING TOOLS Atlas Copco Secoroc offers a full assortment of core boring tools for bottom jack hammers, designed to suit various needs. All core boring tools are made of high standard steel with tungsten carbide and processed with precision to obtain an ideally shaped body. Core boring tools are tempered to achieve the required hardness, ensuring optimal resistance to compression and fatigue. At the final stage of manufacture, the core boring tools are fitted with suitably shaped and sized studs. All core boring tools are manufactured in-house by Atlas Copco. There are five basic types of core boring tools available: Convex, Flat front, SpeedBit, Concave and Rocket. Core boring tools are designed for all types of rock, irrespective of the rock hardness or cracking. Features and advantages Adequately selected steel grades ensure high anti-abrasive resistance. Core boring tools available for all rock types. Możliwość GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. DIAMOND CORE CORE BORING TOOLS DIAMETER Ø27, Ø28, Ø30, Ø32, Ø42 THREAD DIMENSION M14 , M16 Diamond core core boring tools are made of high quality materal. In comparison with alloy drill bits, they have a longer service life and are more cost-efficient. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GLIMARPOL Sp. z o.o. SZLIFIERKI DO OSTRZENIA KORONEK PARAMETER Blade Diameter Air Pressure Air Consumption (At 6barach) Maximum Water Pressure Hose Size Weight Without Hoses Noise Level (Pressure) Noise Level (Power) Vibration Level PARAMETER Height lace max The diameter of lace Lace body diameter max Air pressure max Air pressure min air consumption Spindle motor Engine power board Engine power cooling voltage lighting The rotation speed of the spindle Table rotation speed (50 Hz) Table rotation speed (60Hz) Capacity cooler Weight without packaging GMP-GRIND MATIC BQ2 200mm 127mm 120mm 7bar 4bar 40 l/min 1,0kW 0,15kW 0,10kW 12V 14.900r/min 46r/min 55r/min 22l 222kg GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl GMP-GRIND MATIC HG 7-20 mm 7 bar Pod Bieg jałowy obciążeniem 50 l/s 42 l/s 4,5 bar Powietrze Woda 12,5mm ½’ 6,3m,m ¼’ 2,8kg 91dB (A) 104dB (A) 2 Mniej niż 2,5 m/s GLIMARPOL Sp. z o.o. ULTRA FURIA TAPES Universal saw intended for cutting all types of steel, suitable for both materials and full profiles. Features and characteristics: - Extended service life and superior cutting quality - All-purpose tooth geometry - Teeth intervals designed to withstand vibration and pre-term wear - Possible to cut a broader materal assortment and cross-section types Tooth tip67/68 HRc Dimensio ns (mm) Teeth in inches 0,75/ 1,25 1,2/2 2/3 3/4 4/6 5/8 6/10 8/12 10/14 14/18 6/10 8/12 10/14 14/18 13x0.65 13x0.9 20x0.9 27x0.9 34x1.1 41x1.3 54x1.3 54x1.6 67x1.6 80x1.6 Permanent bar scale: two types of teeth available: N and CI Dimensio ns (mm) Teeth in inches 0,75/ 1,25 1,2/2 2/3 3/4 4/6 5/8 13x0.65 13x0.9 20x0.9 27x0.9 34x1.1 41x1.3 54x1.3 54x1.6 67x1.6 80x1.6 Variable bar scale: two types of teeth: VN and VI Saws available in coils. All items welded as per diemension required. GLIMARPOL Sp. z o.o. Biuro: ul. Bernardyńska 1, 41-902 Bytom NIP: PL 626-300-91-31 Regon: 242933201 Tel/fax + 48 32 335 45 33 Tel/fax + 48 32 235 62 01 e – mail: [email protected] web site: www.glimarpol.pl