SINGLE USE FILTERING HALF MASK FFP1D with valve

SINGLE USE FILTERING HALF MASK FFP1D with valve - Sperian 5111 ML
REF. 1005582
OGÓLNE DANE
Oddział : Ochrona głowy
Grupa : Ochrona dróg oddechowych
Zakres : Jednorazowe APR
Linia : Maski formowane
Sub Sub Sub Family : z zaworem wydechowym
Marka znana poprzednio jako : WILLSON
Business Countries
Poland
Domeny aktywności :
Budownictwo • Przemysł żelaza i stali • Przemysł tekstylny
Użytkowanie produktu :
Application : Textile, construction, iron and steel industries, etc ... Protects against dusts, mists and fumes containing
calcium carbonate, clay, kaolin, cellulose, cotton, flour, ferrous metals, vegetal and mineral oils, metal-working fluids (this list
is non-exhaustive).
Maximum usage level : can be used in atmospheres containing solid and/or liquid aerosols in concentrations up to 4,5 x
OEL* (according to EN 149:2001) - 4 x OEL* in the UK. Certain restrictions or limitations may apply in the case of specific
contaminants. Please refer to applicable health and safety standards.
Limitation to use :
This single-use filtering half-mask should NOT be used in the following situations :
- oxygen concentration is less than 17%
- contaminants or their concentrations are unknown or are immediately dangerous to life or health
- contaminants concentrations exceed levels fixed by applicable health and safety standards or 4,5 x OEL* - 4 x OEL* in the
UK, whichever is lower
- in the presence of toxic or radio-active contaminants
- in the presence of gases or vapours
- fire fighting.
Caution :
We recommend users to ensure that the level of protection offered by the respirator is sufficient for the type and
concentration of contaminant(s) in the work area.
For use only by trained and qualified personnel.
Leak-tightness is unlikely to be achieved if the mask is worn against a beard or facial stubble.
This respirator does not supply oxygen.
* OEL : Occupational Exposure Limit.
ZALETY PRODUKTÓW
Właściwości :
Wide, diversified range
Zaleta :
Covers all the applications of single use Breathing
Protection
Właściwości :
Effective filtration tested after a charge of 120 mg
Zaleta :
Compliance with new French legislation
Właściwości :
Ultra soft Willtech flange seal
Zaleta :
Exceptional level of comfort
Właściwości :
Willtech flange seal with absorption properties
Zaleta :
Prevents irritation and increases wearer acceptance
Właściwości :
Willtech flange seal foam and sealing film
Zaleta :
Protection and wearer acceptance guaranteed
Właściwości :
Hypoallergenic Willtech flange seal
Zaleta :
No risk of allergies
Właściwości :
Pre-formed nosebridge
Zaleta :
Added safety, saves time
Właściwości :
Coloured nosepiece
Zaleta :
Added safety, saves time
Właściwości :
Optional clogging test (dolomite tested)
Zaleta :
No need to change respirators for the normal period of use
Właściwości :
Charge test at 120 mg
Zaleta :
No need to change respirators for the normal period of use
Właściwości :
Large internal volume
Zaleta :
Ease of movement for communication
Właściwości :
Lightweight respirators: 15 g
Zaleta :
Better wearer acceptance with regard to duration
Właściwości :
Heat-moulded shells
Zaleta :
Shape maintained in even when moistened by the user’s exhaled breath, and under heavy loading
Właściwości :
Stapled elastic straps, ultra flexible and strong
Zaleta :
Added safety, saves time
Właściwości :
Stapling outside of the breathing area of the shell
Zaleta :
Leak proof
Właściwości :
Respirators without latex, without silicone, without PVC
Zaleta :
No restriction with regard to use
Właściwości :
3 Sizes
Zaleta :
Optimised wearer acceptance, hence protection
OPIS TECHNICZNY
Zawór : Tak
Dane zaworu :
Exhalation valve fitted with the exclusive "butterfly" opening/closing system
Pokrywa :
Fitted with half-face seal (PES knit, PU foam, PU film)
Pole nosowe :
Pre-formed nose area fitted with a nose-bridge (galvanized wire wrapped by PP)
Dane dla przyłączenia :
Twin elastics stapled outside the filtering area
Waga :
15 g
Rozmiar :
- Średnia
- Duża
- Mała
Testy :
Conforms to European Standard EN 149:2001 as class FFP1 respirator for use against non-toxic to low toxicity solid and
liquid aerosols. Pass the optional clogging test. Meets the requirements of 120 mg loading test (EN143:200/A1:2006
protocol).
Following the tests of the standard EN13463-1 of November 2001, dealing with the risk electrostatics and can be used in
explosive atmospheres in the following domains :
- industry of surface : ATEX - all dust area / gas:group IIB
- mining industry : any type of extraction and any depth
Dane dodatkowe :
Latex, silicone and PVC free
INFORMACJE DODATKOWE
Czas użytkowania :
3 years
DEKLARACJA ZGODNOŚCI UE
Producent lub jego prawny przedstawiciel/dostawca z siedzibą na terenie Unii Europejskiej:
Sperian Protection Europe
Stwierdza, że opisane tutaj środki ochrony osobistej są zgodne z postaniowieniami Dyrektywy 89/686/CEE Rady
Europy:
Designation: SINGLE USE FILTERING HALF MASK FFP1D with valve - Sperian 5111 ML
Reference: 1005582
Standard(s): EN149:2001
ŚOO podlega powyższemu typowi atestu UE:
928
Delivered by:
INSPEC
56 Leslie Hough Way
Salford
M6 6AJ Greater Manchester
United Kingdom
Sporządzono w Plaintel, na 05/09/2001
przez:
Oddział: Ochrona głowy