DEKLARACJA WŁAŚCIWOŚCI UŻYTKOWYCH Nr 0003
Transkrypt
DEKLARACJA WŁAŚCIWOŚCI UŻYTKOWYCH Nr 0003
DEKLARACJA WŁAŚCIWOŚCI UŻYTKOWYCH Nr 0003 – PL 1. Niepowtarzalny kod identyfikacyjny typu wyrobu: kotwa wbijana fischer EA II 2. Zamierzone zastosowanie Produkt Kotwy metalowe do stosowania w betonie (typu lekkiego) Zamierzony cel zastosowania Do za o owań wielopu ktowy h i podwiesza ia ele e tów eto owy h, jak p. sufity podwiesza e z eto u lekkiego, jak rów ież i stala ji, zobacz dodatek, w sz zegól oś i a eksy B 1 do B 5 3. Producent: fischerwerke GmbH & Co. KG, Klaus-Fischer-Straße 1, 72178 Waldachtal, Niemcy 4. Upoważ io y przedstawi iel: -5. System(-y o e y i weryfika ji stałoś i właś iwoś i użytkowy h: 2+ 6a. Norma zharmonizowana: --Jednostka lub jednostki notyfikowane: --6b. Europejski dokument oceny: ETAG 001; 2011-01 Europejska ocena techniczna: ETA-07/0142; 2014-11-07 Jednostka dsoceny technicznej: DIBt Jednostka lub jednostki notyfikowane: 1343 – MPA Darmstadt 7. Deklarowa e właś iwoś i użytkowe: Wytrzy ałość e ha i z a i sta il ość osadze ia (BWR 1) Istot e właś iwoś i wyro u Wartoś i harakterysty z e Funkcjonowanie )o a z dodatek, w sz zegól oś i a eksy C 1 do C 3 O hro a prze iwpożarowa (BWR 2) Istot e właś iwoś i wyro u Reakcja na ogień Odpor ość a działa ie og ia Funkcjonowanie Wy aga ia użytkowe dla klasy A )o a z dodatek, w sz zegól oś i a eks C 1 do C 3 8. Odpowiednia dokumentacja techniczna lub specjalna dokumentacja techniczna: --Właś iwoś i użytkowe określo ego powyżej wyro u są zgod e z zestawe deklarowa y h właś iwoś i użytkowy h. Ni iejsza deklara ja właś iwoś i użytkowy h wyda a zostaje zgod ie z rozporządze ie UE r 5/ a wyłą z ą odpowiedzial ość produ e ta określo ego powyżej. W i ie iu produ e ta podpisał -a): Andreas Bucher, Dipl.-Ing. Wolfgang Hengesbach, Dipl.-Ing., Dipl.-Wirtsch.-Ing. Tumlingen, 2014-11-14 - Ni iejsza Deklara ja Właś iwoś i Użytkowy h została przygotowa a w róż y h języka h. W razie wątpliwoś i w interpretacji, wersja angielska jest zawsze miarodajna. - Dodatek zawierają y do rowol e i uzupeł iają e i for a je w języku a gielski , eutral e językowo a wykra zają e poza wymagania prawne. Appendix 1/13 Specific Part 1 Technical description of the product The fischer drop-in anchor EA II is an anchor made of galvanized or stainless steel which is placed into a drilled hole and anchored by deformation-controlled expansion. The fixture shall be anchored with a fastening screw or threaded rod according to Annex 4. The product description is given in Annex A. 2 Specification of the intended use in accordance with the applicable European Assessment Document The performances given in Section 3 are only valid if the anchor is used in compliance with the specifications and conditions given in Annex B. The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works. 3 Performance of the product and references to the methods used for its assessment 3.1 Mechanical resistance and stability (BWR 1) 3.2 Essential characteristic Performance Characteristic values See Annex C Safety in case of fire (BWR 2) Essential characteristic Performance Reaction to fire Anchorages satisfy requirements for Class A1 Resistance to fire See Annex C 3.3 Hygiene, health and the environment (BWR 3) Regarding dangerous substances there may be requirements (e.g. transposed European legislation and national laws, regulations and administrative provisions) applicable to the products falling within the scope of this European Technical Assessment. In order to meet the provisions of Regulation (EU) No 305/2011, these requirements need also to be complied with, when and where they apply. 3.4 Safety in use (BWR 4) The essential characteristics regarding Safety in use are included under the Basic Works Requirement Mechanical resistance and stability. 3.5 Protection against noise (BWR 5) Not applicable. Appendix 2/13 3.6 Energy economy and heat retention (BWR 6) Not applicable. 3.7 Sustainable use of natural resources (BWR 7) The sustainable use of natural resources was not investigated. 3.8 General aspects The verification of durability is part of testing the essential characteristics. Durability is only ensured if the specifications of intended use according to Annex B are taken into account. 4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base According to Decision of the Commission of 17 February 1997 (97/161/EC) (OJ L 062 of 04.03.97 p. 41-42), the system of assessment and verification of constancy of performance (see Annex V and Article 65 Paragraph 2 to Regulation (EU) No 305/2011) given in the following table applies. Product Intended use Metal anchors for use in concrete (light-duty type) For use in redundant systems for fixing and/or supporting to concrete elements such as lightweight suspended ceilings, as well as installations Level or class _ System 2+ Appendix 3/13 Appendix 4/13 Appendix 5/13 Appendix 6/13 Appendix 7/13 Appendix 8/13 Appendix 9/13 Appendix 10/13 Appendix 11/13 Appendix 12/13 Appendix 13/13