FTTH indoor/outdoor double jacket drop cable with aramid

FTTH indoor/outdoor double jacket drop cable with aramid

The information is believed to be correct at the time of issue. Fibrain reserves the right to change this specification without prior notice. This specification is not contractually valid unless specifically authorised by Fibrain. Buyer and/or user of this
product has to make sure before using this product that it is suitable for the intended use. All questions of liability relating to this product are subject – in accordance with the prevailing – to the Terms of Sale of the selling Fibrain subsidiary.
Type:
Issued:
Modified:
VC-T60
07/08/2015
REV 1
PB
FTTH indoor/outdoor double jacket drop cable with aramid yarns and FRP rods reinforcement
VC-T60
HDPE UV resistant outer sheath
Aramid yarns
Inner LSOH sheath
FRP rods
Module with optical fibres
*schematic drawing, not to scale
APPLICATION:
DESIGN:
Drop cable for FTTH networks
Optical access cable with aramid yarns reinforcement
Direct buried construction
Fully dielectric cable
Last mile connection
Aramid yarns as strength and water absorbent elements
Easy strip buffer or modules with optical fibres
Embedded strength members (FRP)
Highly resistant outer jacket made of HDPE material
UV stabilized
DESIGN:
Variant
1-4F
Fibres
1-4
Quantity [pcs]
Fibres
Total
per
elements
module
1-4
1
Active
tubes
Ø nominal
(±0,2)
1
[mm]
6,0
Nominal
weight
(±10%)
[kg/km]
30
Max
Max
allowed
static
tension
tension
[N], εf=0,33% [N], εf=0,05%
800
250
-
TECHNICAL AND ENVIRONMENTAL CABLE CHARACTERISTICS
Test
Tensile strength
Specification
IEC60794-1-21 Method E1
Method
Sustained load: 250N
Extended load: 800N
Crush resistance
IEC60794-1-21 Method E3
2000 [N/10 cm]
Impact resistance
IEC60794-1-21 Method E4
Impact energy: 5N.m
Torsion
IEC60794-1-21 Method E7
Bending
IEC60794-1-21 Method E11
Water penetration
IEC 60794-1-22
Method F5B
Temperature cycling
IEC 60794-1-22 Method F1
Cable length to be twisted: 1m
No. of cycles: 10
Twist angle: ±180°
Load: 25N
Mandrel radius: 60mm / 10 turns / 5
flexing cycles
Water head: 1m
Sample length: 3m
Time: 168 hrs
+23°C→-40°C(TA2)→
+70°C(TB2) →+23°C
Requirements
εf ≤ 0.05%(during test)
εf ≤ 0.05%(after test)
Δα ≤ 0.05dB @ 1550nm (after test)
No significant damage to fibre unit
εf ≤ 0.33%(during test)
εf ≤ 0.05%(after test)
Δα ≤ 0.05dB @ 1550nm (after test)
No significant damage to fibre unit
Δα ≤ 0.1dB @ 1550nm (after test)
Δα reversible @ 3000 N
Δα ≤ 0.1dB @ 1550nm (after test)
Δα reversible @ 7 N.m
No jacket cracking and fibre breakage
Δα≤0.1dB @ 1550nm (throughout the
test)
No jacket cracking and fibre breakage
Δα≤0.1dB @ 1550nm (after test)
No jacket cracking and fibre breakage
No water leakage
For TA2 and TB2 Δα ≤ 0,1dB/km
Test wavelength: 1550nm
Fibrain Sp. z o.o., ul. Wspólna 4a, 35-205 Rzeszów, Poland tel:+48 17 866 08 12; email:[email protected]; web: www.fibrain.com
1
Type:
Issued:
Modified:
VC-T60
07/08/2015
REV 1
PB
The information is believed to be correct at the time of issue. Fibrain reserves the right to change this specification without prior notice. This specification is not contractually valid unless specifically authorised by Fibrain. Buyer and/or user of this
product has to make sure before using this product that it is suitable for the intended use. All questions of liability relating to this product are subject – in accordance with the prevailing – to the Terms of Sale of the selling Fibrain subsidiary.
APPLICATION AND CABLE SPAN CHARACTERISTIC
Loading Conditions
NSC Light
NSC Medium
NSC Heavy
Span
[m]
75
37
20
Installed Sag
(2%)
[m]
1,5
0,74
0,4
Tension
Total sag
Horizontal sag
Vertical sag
[N]
800
800
800
[m]
2,9
1,5
0,8
[m]
2,7
1,0
0,4
[m]
0,9
1,2
0,7
OPTICAL FIBRE AND TIGHT TUBES COLOUR IDENTIFICATION
Identification colours see DSH_Colors_CODE_XXXX
FIBRE PARAMETERS
Fibres parameters characteristic see DSH_OFP
M ARKING
Marking is white. Print is made at 1 meter intervals using jet printer.
Example:
FIBRAIN VC-T60 4F SM G652D 1M4F
"YEAR OF MANUFACTURE"
"LASER SYMBOL”
“LENGTH MARKING"
“BATCH NUMBER”
The accuracy of marking is ± 0.5%. Remarking is in accordance with Bellcore GR 20 and supersedes earlier markings. Occasional loss of marking
is possible. Cables can be supplied with a range of single mode or multimode fibres and customized print.
PACKAGING
Cables will be shipped on disposable wooden or treated wooden drums. Both ends of the cable will be capped and accessible for testing. Rotation
direction arrow will be marked on the drum together with identification information.
DELIVERY LENGTH
2000 – 8000 meters ± 5%, with possibility of supplying up to 5% of total contract quantity as short length cables which should be above 1000
meters long. Tolerance of 5 % of order quantity shall be allowed.
Fibrain Sp. z o.o., ul. Wspólna 4a, 35-205 Rzeszów, Poland tel:+48 17 866 08 12; email:[email protected]; web: www.fibrain.com
2