magno natural - PCPapier.com
Transkrypt
magno natural - PCPapier.com
MAGNO NATURAL Specyfikacja techniczna/technical specifications Parametry/ Parameter Standard ISO 536 Jednostka /Unit g/m2 80 Gramatura/ Basis weight 90 100 110 120 140 150 170 190 250 300 Grubość/ Thickness ISO 534 103 114 123 136 146 168 180 200 221 285 342 Objętość/ Spec. Volume ISO 534 cm3/g 1,27 1,25 1,24 1,24 1,20 1,20 1,17 1,17 1,17 1,17 1,15 Białość CIE/ CIE Whiteness (D65/10o) ISO 11475 % 144 144 144 144 144 144 144 144 144 144 144 Jasność (światło D65/10o)/ Brightness (illuminant D65/10o) ISO 24702 % 104 104 104 104 104 104 104 104 104 104 104 ISO 87912 ml/min <400 <400 <400 <400 <400 <450 <450 <450 <500 <600 <700 ISO 2471 % 91,5 93 94,5 95,5 96,5 98 98,5 >99 >99 >99 >99 TAPPI 502 % 50 50 50 50 50 50 50 50 50 50 50 ISO 6588 - >7 >7 >7 >7 >7 >7 >7 >7 >7 >7 >7 Gładkość wg Bendtsen/ Roughness Bendtsen Nieprzezroczystość/ Opacity Wilgotność względna/ Relative humidity (23oC) Wartość Ph/ Ph Value Podlaskie Centrum Papieru Sp. z o.o. 15-201 Białystok, ul. Warszawska 107 tel. 085 747 94 04 tel./fax 085 747 94 11 www.pcpapier.com MAGNO NATURAL Rekomendacje druku/Print recommendations Liniatura rastra/ Screen ruling Wszystkie istniejące technologie. /All existing half tone technologies. Farby drukarskie/Printing Inks Każdy odpowiednio jakościowo atrament. /Any suitable quality ink. Dot area Dla powierzchni powyżej 320% zalecamy usuwanie koloru (UCR). For dot areas over 320% we recommend Under Colour Removal (UCR). Przetwarzanie/Processing Przed wyjęciem z opakowania zewnętrznego papier powinien zaklimatyzować się do warunków w pomieszczeniu. Taśmy z opakowania (jeżeli są stosowane) powinny zostać usunięte bezpośrednio po dostarczeniu. Opakowania zewnętrzne należy usunąć dopiero, gdy są gotowe do druku. Idealne warunki w pomieszczeniu do druku powinny wynosić wilgotność względna 50% ± 5 % przy temperaturze 20°C. / Allow paper time to acclimatise to press room conditions before removing outer packaging. Strapping bands (if applied) should be removed shortly after delivery. Outer wrappers should be removed only when ready to print. Ideal press room conditions should be 50% ± 5 % relative humidity at 20°C. Wykończenie/Finishing Pasuje do wszystkich standardowych wykończeń, laminowania (>130gsm), tłoczenia I sztancowania. Lakiery zawierają: rozproszenie, druk, UV, spot, relief, irodin, scented & acqueos. Suitable for all standard finishes, foil laminating (>130gsm), embossing and die cutting. Varnishes include: dispersion, print, UV, spot, relief, iriodin, scented & acqueous. Przetwarzanie/Converting Pre-bigowanie przed składaniem jest zalecane od 135 um grubości. Kanał gniecenia powinien wynosić minimum 2x grubości papieru powiększonej o grubość noża do bigowania (plus lub minus 0,2 mm). Żłobkowanie nóż 2 punkt (0,71mm)(to i to zależy od fold device). Pre-creasing before folding is recommended from 135 um thickness onwards. Crease channel width should be a minimum of 2x paper thickness plus thickness creasing knife (plus or minus 0,2 mm). Crease channel depth should ± 1.5x paper thickness. Creasing knife 2 point (0,71 mm) (this and that depending on your crease/fold device). Dodatkowe metody suszenia /Assisted drying methods Podczas korzystania z infra czerwonych metod suszenia, temperatura stosu nie powinna przekraczać 37°C. Nadaje się do utwardzania UV ininks. When using infra red drying methods, stack temperature should not exceed 37°C. Suitable for UV cure ininks. Podlaskie Centrum Papieru Sp. z o.o. 15-201 Białystok, ul. Warszawska 107 tel. 085 747 94 04 tel./fax 085 747 94 11 www.pcpapier.com MAGNO NATURAL Certyfikaty fabryczne i produktów /Mill and product certifications MILL CERTIFICATION EMAS ISO 14001 ISO 9001 OHSAS 18001 PEFC C.o.C FSCTM C.o.C TCF/ ECF PRODUCT CEFTIFICATIONS PEFC FSCTM Food credit Mix contact material FSC™ & PEFC may have limited availability./FSC™ & PEFC mogą mieć ograniczoną dostepność. Podlaskie Centrum Papieru Sp. z o.o. 15-201 Białystok, ul. Warszawska 107 tel. 085 747 94 04 tel./fax 085 747 94 11 www.pcpapier.com Toy safety