T71-350
Transkrypt
T71-350
T71-350 Phase Control Thyristor KKT71350, January 2007 version Thyristors type T71 are of modern design with internal spring loaded contacts, high alumina ceramic insulator and preassure welding encapsulation. Designed for use in power electronic circuits and equipment under normal operating conditions. KEY PARAMETERS UDRM, URRM IT(AV) ITSM du/dt* di/dt up to 2400 V 350 A 9100 A 1000 V/s 100 A/s * maximum (non standard) value FEATURES all diffused design high current capabilities high surge current capabilities high rates voltages high du/dt low gate current dynamic gate low thermal impedance tested according to IEC standards compact size and small weight APPLICATION Outline based on JEDEC TO-209AE (TO-118) See package details for further information High Power Drives DC Motor Control High Voltage Power Supplies Designed for use in high power industrial and commercial power electronic circuits and equipment where high currents are encoutered and high reliability is essential. Zakłady Elektronowe LAMINA S.A. Puławska 34 PL-05-500 Piaseczno POLAND Tel.: +48-22-7572731 Tel.: +48-22-3989409 Fax.: +48-22-3989407 e-mail: [email protected] www.lamina.com.pl 1/7 T71-350 Phase Control Thyristor KKT71350, January 2007 version ORDERING INFORMATION When ordering please refer to device code builder presented below. Please use the complete part number when ordering, quote or in any future correspondence relating to your order. T71-350- voltage class (hundreds of volts) This is standard device, with no dynamic parameters specified and standard accessory set. Please refer to Electrical Parameters if specific dynamic demands have to be met. Those information, as well as any other concerning non-standard accessories e.g. stud thread, custom leads lenght or lead terminal connector type should be included in the order. ELECTRICAL PARAMETERS Voltage ratings UDRM, URRM Voltage class 04 06 08 10 12 14 16 18 20 22 24 UDSM, URSM IDRM, IRRM V V mA 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 500 700 900 1100 1300 1500 1700 1900 2100 2300 2500 33 du/dt group codes du/dt Group code V/s 0 no specified value 4 200 5 320 6 500 7 1000 Zakłady Elektronowe LAMINA S.A. Puławska 34 PL-05-500 Piaseczno POLAND Tel.: +48-22-7572731 Tel.: +48-22-3989409 Fax.: +48-22-3989407 e-mail: [email protected] www.lamina.com.pl 2/7 T71-350 Phase Control Thyristor KKT71350, January 2007 version Electrical properties Parameter Average on-state current Unit Value IT(AV) A 350 Tc °C 70 IT(RMS) A Case temperature RMS on-state current Test conditions Surge current ITSM A I2t kA2s UTM V Treshold voltage UT(T0) V Slope resistance rT mΩ Latching current Il mA Holding current IH I2t – value On-state voltage max. 550 Tj=125°C, UR=0,8URRM, tp=10ms 9100 Tj=25°C, ITM=625A 1,80 415 0,86 0,60 Tj=25°C, UD=12V 800 mA Tj=25°C, UD=12V 200 200 Circuit commutated turn-off time (typical) tq s Tj=125°C, ITM=250A, diR/dt=25A/s, du/dt=20V/s, UD=0,67UDRM, URM=100V Turn-0n time (typical) ton s ITM=100A, UDM=100V 12 100 Rate of rise of on-state currentrepetitive di/dt A/s Tj=125°C, ITM=3IT(AV), UD=0,67UDRM, f=50Hz, IGM=1A, diG/dt=1A/s Critical rate of raise of off-state voltage du/dt V/s Tj=125°C, UD=0,67UDRM, 200 - 1000 Gate current to trigger IGT mA Tj=25°C, UD=12V 200 Gate voltage to trigger UGT V Tj=25°C, UD=12V 3 Unit Test conditions Value RthJC °C/W DC 0,10 RthCS °C/W 0,05 Tjmin...Tjmax °C -40...+125 Tstg °C -40...+125 Termal properties Parameter Thermal resistance, junction to case Thermal resistance, case to heatsink Operating junction temperature Storage temperature Mechanical properties Parameter Unit Value Mounting torque M Nm 38 ... 41 Weight m g 530 Zakłady Elektronowe LAMINA S.A. Puławska 34 PL-05-500 Piaseczno POLAND Tel.: +48-22-7572731 Tel.: +48-22-3989409 Fax.: +48-22-3989407 e-mail: [email protected] www.lamina.com.pl 3/7 T71-350 Phase Control Thyristor KKT71350, January 2007 version Package details For further package information, please contact Sales & Marketing Department. All dimensions in mm, unless stated otherwise. Do not scale. Zakłady Elektronowe LAMINA S.A. Puławska 34 PL-05-500 Piaseczno POLAND Tel.: +48-22-7572731 Tel.: +48-22-3989409 Fax.: +48-22-3989407 e-mail: [email protected] www.lamina.com.pl 4/7 T71-350 Phase Control Thyristor KKT71350, January 2007 version CHARACTERISTICS PT(AV), W PT(AV), W 600 700 DC 600 500 o 180 o 180 o 120 500 o 90 400 o 120 o 90 o 60 400 o o 60 30 300 o 30 300 200 200 100 100 Q Q 0 0 0 50 100 150 200 250 300 350 0 400 IT(AV), A Power loss characteristics. Sinus wave form. o 100 200 300 400 500 600 IT(AV), A Power loss characteristics. Square wave form. o TC, C TC, C 130 130 120 120 110 110 Q Q 100 100 90 90 80 o 30 80 o 30 o 60 90 o 60 70 o o 90 o 120 70 o 120 180 o 60 o 180 60 DC 50 0 100 200 300 Case temperature ratings. Sinus wave form. 400 IT(AV), A 0 100 200 300 400 Case temperature ratings. Square wave form. Zakłady Elektronowe LAMINA S.A. Puławska 34 PL-05-500 Piaseczno POLAND Tel.: +48-22-7572731 Tel.: +48-22-3989409 Fax.: +48-22-3989407 e-mail: [email protected] www.lamina.com.pl 5/7 500 600 IT(AV), A T71-350 Phase Control Thyristor KKT71350, January 2007 version ITSM, [kA] UTM, V 10 6 9 8 4 7 3 6 2 5 1 4 1 Tj=Tjmax 5 Tj=Tjmax UR=0,8URRM 10 100 0 100 1000 n Non-repetitive surge current rating On-state characteristic o Zth(t), C/W 0,1 0,01 0,001 0,001 0,01 0,1 1 10000 ITM, A 10 t, s Transient thermal impedance Zakłady Elektronowe LAMINA S.A. Puławska 34 PL-05-500 Piaseczno POLAND Tel.: +48-22-7572731 Tel.: +48-22-3989409 Fax.: +48-22-3989407 e-mail: [email protected] www.lamina.com.pl 6/7 T71-350 Phase Control Thyristor KKT71350, January 2007 version Gate characteristics iG, mA iG , A 600 4 UFGM=20V 500 IFGM=4A 3 400 Tj=-40oC 300 2 PGM=16W 200 Tj=+125oC Tj=+25oC B 1 R 100 A 0 0 1 2 3 4 UGD=0,25V 0 5 0 uG, V 5 10 15 Gate characteristic. 20 uG , V A - possible trigger area B - permitted gate pulse forcing area R - recommended gate drive load line Gate characteristic. Possible trigger area. HEATSINKS LAMINA S.I. has its own proprietary range of extruded aluminium heatsinks designed to optimise the performance of our semiconductors with natural and forced air flow. High efficiency water cooled copper heatsinks are also available. POWER ASSEMBLY CAPABILITY LAMINA S.I. provides a support for those customers requiring more than a basic semiconductor and offers precisely assembled Power Blocks according to factory or customer standards. Zakłady Elektronowe LAMINA S.A. Puławska 34 PL-05-500 Piaseczno POLAND Tel.: +48-22-7572731 Tel.: +48-22-3989409 Fax.: +48-22-3989407 e-mail: [email protected] www.lamina.com.pl 7/7