Program - IASS 2013

International Association for Shell and Spatial Structures
IASS 2013 Symposium
Beyond the Limits of Man
Program
Wroclaw University of Technology
Wroclaw, Poland
23–27 September 2013
http://iass2013.pwr.wroc.pl
Tuesday, 11:00-12:45
Tuesday, 14:00-15:45
Tuesday, 16:15-18:00
Room A1
Room A1
Room A1
Thursday, 11:00-12:45
Thursday, 14:00-15:45
Friday, 9:00-10:30
Friday, 11:00-12:45
Monday, 14:00-15:45
Monday, 16:15-18:00
Tuesday, 11:00-12:45
Room A1
Room A1
Room A1
Room A1
Room A1
Room A1
Room C
Tuesday, 11:00-12:45
Tuesday, 14:00-15:45
Monday, 14:00-15:45
Monday, 16:15-18:00
Tuesday, 11:00-12:45
Tuesday, 14:00-15:45
Tuesday, 16:15-18:00
Thursday, 11:00-12:45
Thursday, 14:00-15:45
Monday, 14:00-15:45
Monday, 16:15-18:00
Tuesday, 11:00-12:45
Tuesday, 14:00-15:45
Tuesday, 16:15-18:00
Thursday, 11:00-12:45
Thursday, 14:00-15:45
Thursday, 16:15-18:00
Session organized by Working Group 18
WG 18-1
Environmentally Compatible Structures, part 1
WG 18-2
Environmentally Compatible Structures, part 2
Tuesday, 16:15-18:00
Thursday, 16:15-18:00
WG 18 – Environmentally Compatible Structures, Co-Chairs: Ludevit VEGH 12 and Petr VEGH 13
Session organized by Working Group 12
WG 12-1
Timber Spatial Structures, part 1
WG 12-2
Timber Spatial Structures, part 2
WG 12 – Timber Spatial Structures, Chair: Andreas FALK 11
Session organized by Working Group 8
WG 8-1
Buckling and Realization, part 1
WG 8-2
Buckling and Realization, part 2
WG 8-3
Buckling and Realization, part 3
WG 8-4
Buckling and Realization, part 4
WG 8-5
Earthquake Response and Performance, part 1
WG 8-6
Earthquake Response and Performance, part 2
WG 8-7
Earthquake Response and Performance, part 3
WG 8 – Metal Spatial Structures, Chair: Shiro KATO 10
Session organized by Working Group 6
WG 6-1
New Tensile Structures in the Americas
WG 6-2
The New BC Place Stadium in Vancouver, Canada
WG 6-3
Tensegrity Structures
WG 6-4
Computational Problems, part 1
WG 6-5
Computational Problems, part 2
WG 6-6
Air Inflated and Special Tension Structures
WG 6-7
Adaptive Membranes
WG 6-8
Materials
Room B
Room B
Room B
Room B
Room D
Room D
Room D
Room D
Room D
Room D
Room D
Room A2
Room A2
Room A2
Room A2
Room A2
Room A2
Room A2
Room A2
WG 6 – Tension and Membrane Structures, Co-Chairs: Marijke MOLLAERT 7, Ron SHAEFFER 8 and Ken’ichi KAWAGUCHI9
Session organized by Working Group 3
WG 3-1
Introduction
WG 3-2
Maintenance
WG 3-3
Structure
WG 3-4
Actions
WG 3 – Cooling and Solar Updraft Towers, Chair: Reinhard HARTE 6
Special Session
POL-1
Polish Contributions to Spatial Structures, part 1
POL-2
Polish Contributions to Spatial Structures, part 2
POL-3
Polish Contributions to Spatial Structures, part 3
2
) [email protected]
) [email protected]
8
) [email protected]
9
) [email protected]
10
) [email protected]
7
6
Case Studies, part 1
Case Studies, part 2
Case Studies, part 3
Design Process, part 1
Design Process, part 2
Structural Modelling and Computational Methods, part 1
Structural Modelling and Computational Methods, part 2
Structural Modelling and Computational Methods, part 3
Structural Modelling and Computational Methods, part 4
Structural Modelling and Computational Methods, part 5
Structural Modelling and Computational Methods, part 6
Structural Modelling and Computational Methods, part 7
Materials, Durability and Maintenance, part 1
Materials, Durability and Maintenance, part 2
Structural Health Monitoring and Life Safety
Shell Structures, part 1
Shell Structures, part 2
) [email protected]
) [email protected]
3
) [email protected]
4
) [email protected]
5
) [email protected]
1
GEN-1
GEN-2
GEN-3
GEN-4
GEN-5
GEN-6
GEN-7
GEN-8
GEN-9
GEN-10
GEN-11
GEN-12
GEN-13
GEN-14
GEN-15
GEN-16
GEN-17
GEN – General Session, Chair: Jan B. OBRĘBSKI 4
Session organized by Working Group 15
WG 15-1
Computation and Geometry
WG 15-2
Faceted and origami structures
WG 15-3
Form Finding and optimization
WG 15-4
Graphical statics
WG 15-5
Grid shells
WG 15-6
Materials and fabrication, part 1
WG 15-7
Materials and fabrication, part 1
WG 15-8
Reciprocal and tensegrity structures, part 1
WG 15-9
Reciprocal and tensegrity structures, part 2
WG 15-10
Transformable structures, part 1
WG 15-11
Transformable structures, part 2
WG 15 – Structural Morphology, Chair: Jeroen COENDERS 15
Session organized by Working Group 13
WG 13-1
Computational Methods, part 1
WG 13-2
Computational Methods, part 2
WG 13-3
Computational Methods, part 3
WG 13-4
Computational Methods, part 4
WG 13-5
Computational Methods, part 5
WG 13 – Computational Methods, Chair: Makoto OHSAKI 14
Beyond the Limits of Man
POL – Polish Contributions to Spatial Structures, Co-Chairs: Jan B. OBRĘBSKI 4 and Romuald TARCZEWSKI 5
Special Session co-organized by Working Groups WG 5 and WG 17
PLN-1
Nervi: Heritage and Preservation
PLN-2
Nervi: Design Approaches
PLN-3
Nervi: Shell and Spatial Structures
PLN – Pier Luigi Nervi, Co-Chairs: John F. ABEL 1, Gorun ARUN 2 and Mario CHIORINO 3
Program Overview
IASS 2013 Symposium, Wroclaw
Room A3
Room A3
Room B
Room C
Room C
Room A2
Room C
Room D
Room E
Room A2
Room D
Room E
Room B
Room B
Room D
Room B
Room A1
Room B
Room B
Room A3
Room A3
Room A3
Room A3
Room A3
Room A3
Room A3
Room A3
Room C
Room C
Room C
Room C
Room C
Room C
13
12
) [email protected]
) [email protected]
) [email protected]
14
) [email protected]
15
) [email protected]
11
Monday, 14:00-15:45
Monday, 16:15-18:00
Thursday, 11:00-12:45
Monday, 14:00-15:45
Monday, 16:15-18:00
Friday, 9:00-10:30
Friday, 9:00-10:30
Friday, 9:00-10:30
Friday, 9:00-10:30
Friday, 11:00-12:45
Friday, 11:00-12:45
Friday, 11:00-12:45
Friday, 9:00-10:30
Friday, 11:00-12:45
Thursday, 16:15-18:00
Thursday, 14:00-15:45
Thursday, 16:15-18:00
Monday, 14:00-15:45
Monday, 16:15-18:00
Tuesday, 11:00-12:45
Tuesday, 14:00-15:45
Tuesday, 16:15-18:00
Thursday, 11:00-12:45
Thursday, 14:00-15:45
Thursday, 16:15-18:00
Friday, 11:00-12:45
Friday, 9:00-10:30
Friday, 11:00-12:45
Tuesday, 14:00-15:45
Tuesday, 16:15-18:00
Thursday, 11:00-12:45
Thursday, 14:00-15:45
Thursday, 16:15-18:00
6
Program
Morning Sessions
Afternoon Sessions
Social Events
00
17
18
room A
room A
room A
Tension and
Timber
Membrane
Computa- Buckling
Spatial
and
Structures:
Nervi:
tional
Design Comp. Probl., Graphical Structures, Methods, Realization,
statics
part 2
part 4
Approaches part 1
part 1
room D
room A1
room A2
room A3
room B
room C
room B
room C
Registration
room A3
room D
room E
room A3
room B
room C
Country Manor in Miłocin
Conference Banquet
room A2
Computational
Methods,
part 5
room D
Structural
Health
Monitoring
and Life
Safety
Cooling
and Solar
Updraft
Towers:
Actions
Overview
Annual General Meeting of the IASS
Closing Ceremony
Coffee Break
Plenary Session 5
Hangai Prize Conferral
Lunch
room A
room A
2000
1900
1800
1700
1600
1500
1400
1300
1200
1100
1000
900
800
2200
room A1
Reciprocal Environmentally
and
Tension and
Shell
Membrane tensegrity Compatible
Structures, Structures: structures, Structures,
part 1
part 2
part 1
Materials
GEN-17 WG 6-8 WG 15-8 WG 18-2 WG 13-5 GEN-15
Coffee Break
Earthquake
Cooling
and Solar
Materials
Computa- Response
and PerUpdraft
Shell
and
tional
Towers:
Adaptive fabrication, Structures, Methods, formance,
part 3
Maintenance Membranes
part 1
part 1
part 4
WG 3-2 WG 6-7 WG 15-7 GEN-16 WG 13-4 WG 8-7
Lunch
Computational
Methods,
part 3
Materials, Reciprocal Structural
Structural Structural
Durability
and
Modelling
Modelling Modelling
Transand Main- tensegrity and Comput. formable and Comput. and Comput.
tenance, structures, Methods, structures, Methods, Methods,
part 7
part 2
part 2
part 5
part 6
part 2
Case
Studies,
part 3
Earthquake
Response
and Performance,
part 2
Cooling
and Solar Air Inflated Materials
Updraft and Special
and
Towers:
Tension fabrication,
Introduction Structures
part 1
WG 3-4 GEN-14 WG 15-9 GEN-10 WG 15-11 GEN-11 GEN-12
WG 3-1 WG 6-6 WG 15-6 GEN-3 WG 13-3 WG 8-6
Cooling and Materials,
Trans- Struct. Mod. Struct. Mod. Struct. Mod. Struct. Mod.
Solar Up- Durability formable and Comp. and Comp. and Comp. and Comp.
Methods, Methods,
draft Towers: and Maint., structures, Methods,
Methods,
part 1
part 1
part 3
part 4
Structure
part 1
part 2
WG 3-3 GEN-13 WG 15-10 GEN-6 GEN-7 GEN-8 GEN-9
room A2
Coffee Break
room A
room A1
Friday, 27.09
Coffee Break
Plenary Session 4
Invited Lectures
Registration
Thursday, 26.09
2200
room D
Wed.
25.09
2100
Museum of Architecture
room C
Tension and
Membrane
Nervi:
Shell and Structures:
Spatial Comp. Probl.,
part 2
Structures
Centennial Hall / „Pergola” Restaurant
room B
Design
Process,
part 2
Buckling
and
Realization,
part 2
Vernissage of the
Pier Luigi Nervi Exposition
room A3
room A2
room A1
Faceted
and
origami
structures
Centennial Hall Tour
& Welcome Reception
Case
Studies,
part 2
The New
BC Place
Stadium in
Vancouver,
Canada
Polish
Contribution
to Spatial
Structures,
part 2
PLN-3 WG 6-5 WG 15-5 WG 18-1 WG 13-2 WG 8-5
POL-2 WG 6-2 GEN-2 WG 15-2 GEN-5 WG 8-2
Earthquake
Environmentally Computa- Response
and PerCompatible
tional
Structures, Methods, formance,
part 1
part 1
part 2
Grid shells
Coffee Break
Coffee Break
Buckling
and
Realization,
part 1
Polish
Contribution New Tensile
to Spatial Structures
Structures,
in the
part 1
Americas
Case Computation Design
Studies,
and
Process,
part 1
Geometry
part 1
PLN-2 WG 6-4 WG 15-4 WG 12-2 WG 13-1 WG 8-4
Lunch
Polish
Nervi:
Timber Contribution Buckling
Heritage
to Spatial
Spatial
and
Form
Tensegrity Finding and Structures, Structures, Realization,
and
Preservation Structures optimization part 1
part 3
part 3
PLN-1 WG 6-3 WG 15-3 WG 12-1 POL-3 WG 8-3
Coffee Break
Plenary Session 3
Invited Lectures
Registration
POL-1 WG 6-1 GEN-1 WG 15-1 GEN-4 WG 8-1
Lunch
room A
Plenary Session 2
Torroja Medal
Tsuboi Awards
Technical Activities Committee
Coffee Break
Plenary Session 1
Torroja Medal
IASS Honorary Membership
Opening Ceremony
Registration
Tuesday, 24.09
7
Program
2100
2000
1900
00
1600
1500
1400
1300
1200
1100
1000
900
8
00
Monday, 23.09
Program Overview
Beyond the Limits of Man
Technical Tour
IASS 2013 Symposium, Wroclaw
Morning Sessions
Afternoon Sessions
Social Events
MONDAY, 23 September
IASS 2013 Symposium, Wroclaw
Recipients: John F. ABEL
Frei OTTO
Frei OTTO
Conferral of Torroja Medals
Plenary Lectures
Lunch 12:45 – 14:00
Monday
Recipients: Tomohiro TACHI and Koryo MIURA
Stefan NEUHAEUSER, Martin WEICKGENANNT and Christoph WITTE
Walter HASSE, Oliver SAWODNY and Werner SOBEK
Technical Activities Committee session
Conferral of Tsuboi Awards
On the Heritage of the IASS
Plenary Lectures by the Recipients of Torroja Medals (part 2)
Conferral of Tsuboi Awards and TAC session
John F. ABEL
Plenary Lecture
Plenary Session 2
Coffee Break 11:00 – 11:30
Own Impact to Shaping and Analyses of Lightweight Structures
Jan B. OBRĘBSKI
Torroja Medal Plenary Lecture
Recipient: Jan B. OBRĘBSKI
Conferral of IASS Honorary Membership
room A
room A
room A
Plenary Session 1
Conferral of IASS Honorary Membership and Torroja Medals
and Plenary Lectures by the Recipients (part 1)
room A
9
Program
Opening Ceremony
Morning Session, 9:00 – 12:45
Registration 8:00 – 16:15
Beyond the Limits of Man
Structures by Stefan J.
Medwadowski
John F. ABEL
The Renew BC Place in Vancouver,
BC, Canada
Ruy Marcelo PAULETTI, Carlos
HENRIQUE, Jesus YÉPEZ, Slade
GELLIN
The Latin American Symposia and
some New Tensile Structures in Latin
America
David M. CAMPBELL, Karen A.
LYNCH
Tadeusz BARUCKI
The life and work of Maciej Nowicki
Photovoltaics on the Tensile
Membrane at Staten Island
Children’s Museum
Jeffrey A. CARPENTER, Slade GELLIN
In Memoriam of Z. S. Makowski
1922 - 2005
keynote speaker
Jan B. OBRĘBSKI
The Emergence of New Challenges
in the Design of Tensile Structures
in Mexico
Engineers in the service of the
nation
Activities of Working Group 8
Christoph WITTE, Jonathan BUSSE,
Stefan NEUHAEUSER, Werner SOBEK
ILEK_Lab – Experimental Approaches
in Architectural Education
Romuald TARCZEWSKI
Natural and geometrical prototypes
of organic forms in architecture
Coffee Break 15:45 – 16:15
Piers SHEPPERD, Jeremy LLOYD,
Rastislav BARTEK, Stefano
CAMMELLI
London 2012 Olympic Ceremonies –
Video Screens
Paper Spatial Structures
Jerzy F. ŁĄTKA
High rise buildings – Construction
stage design
Mehdi ABBASI MOUSAVI,
Karim ABEDI, Mohammad Reza
CHENAGHLOU
Investigation into the Stability
Behavior of Free Form Space
Structure
Form-finding and planarisation of
glass domes with quad elements
Matthias W. OPPE, Thorsten HELBIG, Jaime SANCHEZ-ALVAREZ, Kamil
Laurent GIAMPELLEGRINI
SCHWARNOWSKI, Christian
WOLKOWICZ
Design and Contruction of a FreeQuasi-regular Geodesic Tessellations How the choice of material
with Chained Triangles
influences design strategies for free- Form Reticulated Glazed Canopy
form structures
keynote speaker
Bogusław WOJTYSZYN
Enzo SIVIERO, Michele CULATTI,
Matteo DINI, Giovani ESTRADA,
Alessandro STOCCO, Andrea
Maurizio FROLI, Niccolo BALDASSINI
TOTARO
The Possibilities of Applying a
Innovative footbridges
Form-finding and buckling
Geometrical Mesh of Location
optimisation of gridshells using
Distances – GMDL in spatial
genetic algorithms
structures
Paul SHEPHERD, Will PEARSON
Gian Carlo GIULIANI, Mauro Eugenio Giovani ESTRADA, Niccolo
GIULIANI, Paolo DE ANGELIS
BALDASSINI
Christopher Joseph KITRICK
Activities of Working Group 15
Metal Spatial Structures
Buckling and Realization, part 1
WG 8-1 Room D
Shiro KATO
General Session
Design Process, part 1
GEN-4 Room C
10
Program
Jeroen COENDERS
Structural Morphology
Computation and Geometry
WG 15-1 Room B
Topology Optimisation of
Algorithmically Generated Space
Frames
Werner SOBEK, Stefan
Ivan KUSHNARENKO, Vyacheslav
NEUHAEUSER, Walter HAASE, Oliver IVANOV
SAWODNY, Martin WEICKGENANNT
Ultralightweight Structures
Joachimsthal’s Channel Surfaces for
Architectural Applications
Winter Garden: An Icon of
Shanghai’s North Bund
Tian-Fang JING, Zhou XU
An integrated design of a free form
space structure
Massimo MAJOWIECKI, Giovanni
BERTI
Conversion of the gasholder into
multi-purpose hall
Eric VALDEZ-OLMEDO, Juan Gerardo Vladimir JANATA, Miloslav LUKEŠ
OLIVA-SALINAS
Bolesław ORŁOWSKI
General Session
Case Studies, part 1
GEN-1 Room A3
Marijke MOLLAERT, Ron SHAEFFER,
Ken’ichi KAWAGUCHI
Activities of Working Group 6
Tension and Membrane Structures
New Tensile Structures
in the Americas
WG 6-1 Room A2
Afternoon Session, 14:00 – 15:45
Beyond the Limits of Man
Jan B. OBRĘBSKI, Romuald
TARCZEWSKI
Introduction to the session
Polish Contributions to Spatial
Structures
part 1
POL-1 Room A1
MONDAY, 23 September
IASS 2013 Symposium, Wroclaw
Knut GÖPPERT, Michael STEIN,
Christoph PAECH
Design of a new landmark for
Vancouver - BC Place Stadium
BC Place: Analysis and Patterning
of the Inner Retractable Roof
Tony HOGG
« Nodes and Spatial Structures », a
tribute to Stéphane Du Chateau
Cláudia Estrela PORTO
Artistic and Research Unit of the
Academy of Fine Arts
The structural conception in
BC Place: Detail Design of the
Stéphane du Chateau’s work: from Retractable Membrane
metallic trusses to the development
of spatial frames
Jolanta GOLA
Adam BOWN
Réne MOTRO
An adventure of my life. A design
study of the main sports objects
of the 21st Olympic Games in
Montreal
keynote speaker
Kazimierz FLAGA
David M. CAMPBELL, Karen A.
LYNCH
Introduction to New BC Place
Stadium Roof in Vancouver, BC,
Canada
Tension and Membrane Structures
The New BC Place Stadium
in Vancouver, Canada
WG 6-2 Room A2
keynote speaker
Conceptual Design and Analysis of
Long Span Structures
Massimo MAJOWIECKI
Polish Contributions to Spatial
Structures
part 2
POL-2 Room A1
MONDAY, 23 September
IASS 2013 Symposium, Wroclaw
Tomohiro TACHI
Tibor TARNAI, Krisztián HINCZ,
András LENGYEL
Volume Increasing Inextensional
Deformation of a Cube
Structural Morphology
Faceted and origami structures
WG 15-2 Room B
Lei LU, Zhenchao GONG, Zhongjin
YUAN, Weibiao YANG
Structure Design of a Community
Service Centre
Cycle and Foot Bridge over the
River Morava between Slovakia
and Austria
Zoltán AGÓCS, Anton BEZÁK,
Marcel VANKO, Andrej PALFI
Lionel DU PELOUX, Frédéric TAYEB,
Olivier BAVEREL, Jean-François
CARON
Faith Can Also Move Composite
Gridshells
The TRADA Pavilion – A Timber
Plate Funicular Shell
Metal Spatial Structures
Buckling and Realization, part 2
WG 8-2 Room D
Xin ZHAO, Yaomin DONG
Design of an Emergency Shelter
Martinus Willem KAMERLING
Luis IRISARRI ALONSO, Josu GOÑI,
Ivan UZKUDUN
From design to reality
Rational design and position of
outriggers In steel frames of highrise buildings
11
Program
Hand Calculation of Ultimate
Strength of Cylindrical Reticulated
Shells of Single Layer
Approximating a funicular shape
with a translational surface –
Example of a glass canopy
Shiro KATO, Shoji NAKAZAWA,
Yasuaki KODO, Toshimasa
YANAGISAWA
Raphaël MENARD, Etienne
FAYETTE, Paul AZZOPARDI
Lianping YANG, Shen WEI, Yaming
LI
Sliding Bearings with Rollers for
Aluminium Free-Form Reticulated
Shells: Design Approach and
Experimental Study
Lianping YANG, Shen WEI, Qilin
ZHANG, Wanli XUE
Shape optimization of shell
State-of-the-Art Review on
structures based on NURBS
Aluminium Single-Layer Latticed
description using genetic algorithm Domes
Bin YANG, Jialin MA, Qilin ZHANG
General Session
Design Process, part 2
GEN-5 Room C
Optimising Stone-Cutting Strategies Structural Optimization under
for Freeform Masonry Vaults
Period Constraint for Super-Tall
Building with Outriggers
John Ernest HARDING, Harri LEWIS Vladimir TRAVUSH, Denis KONIN
Matthias RIPPMANN, John CURRY,
David ESCOBEDO, Philippe BLOCK
Design and construction of a spatial Interactive Form-Finding of Elastic
structure for a long span heavy
Origami
maintenance hangar
Aimar INSAUSTI
Gian Carlo GIULIANI, Mauro
Eugenio GIULIANI, Fabio CAPSONI
Recent free form high rise buildings
in Milano
General Session
Case Studies, part 2
GEN-2 Room A3
Afternoon Session, 16:15 – 18:00
Beyond the Limits of Man
TUESDAY, 24 September
IASS 2013 Symposium, Wroclaw
Invited Plenary Lectures
Coffee Break 10:30 – 11:00
Optical illusion in art – Can impression of movement be achieved in art and architecture?
Wojciech ZABŁOCKI
Theoretical and Experimental Studies on Wind-induced Vibration of Tension Structures
Qilin ZHANG, Yanjun YAN, Han LI
Plenary Session 3
Morning Session, 9:00 – 10:30
Registration 8:00 – 16:15
Beyond the Limits of Man
room A
12
Program
Improving Generative Design through
Selective Breeding
Robert VIERLINGER, Arne HOFMANN,
Klaus BOLLINGER
Emergent Hybrid Prefab Structures in
Dwellings
Structural Analysis of Plate Based
Tensegrity Structures
Su Duo XUE, Zhan Yuan GAO, Xiong
Yan LI
Morphological analysis of cable strut
tensile structure
Presenting Nervi’s work through scale
models: The NerViLab
Reuse of materials and components to
build a temporary eco-structure
Carol MONTICELLI, Stefano ALIPRANDI,
Valeria GIURDANELLA, Salvatore
VISCUSO, Alessandra ZANELLI
Anatoliy Mihkaylovich YUGOV, Vladimir
Ivanovich MOSKALENKO, Aleksey
Borisovich BONDAREV
Metal Spatial Structures
Buckling and Realization, part 3
WG 8-3 Room D
Michał Szczęsny PELCZARSKI
Seeking aesthetics of some engineering
constructions created in Poland after
1945
Irma KOZINA
Tuesday
Z S Makowski: A Pioneer
Gerard PARKE, Seyed Alireza BEHNEJAD
13
Program
The axial mechanical performance of the
threaded-sleeve cast steel node
Xiong Yan LI, Xuan Yi YAO, Si Yao LI
Effect of Quasi-static Seismic Loads on
Plane Lattice Frames with Columns
Kenta TOKUDA, Yoshiya TANIGUCHI
Elastic-Plastic Behaviour of the SLO Node
for the Second Order Calculation of the
Safety Factor Against Global Buckling in
Single Layer Structures
Josu GOÑI MARTINEZ, Luis IRISARRI
Methodology of shaping the structure
The method of generating large-span
of Katowice “Spodek” arena roof.
systems with the manufacturer defect
Considerations from interviews with Prof and assembly sequence
Wacław Zalewski
Michał Szczęsny PELCZARSKI
Polish Contributions to Spatial
Structures
part 3
POL-3 Room C
Timber Post-formed Gridshell: Digital
Foldable Venezuela’s Expo Pavilion
Form-finding / drawing and building tool in Sevilla 1992 Considerations from
interviews with Prof Wacław Zalewski
Sergio PONE, Sofia COLABELLA,
Bernardino D’AMICO, Andrea FIORE,
Daniele LANCIA, Bianca PARENTI
Progressive Development of Timber
Gridshell Design, Analysis and
Construction.
Gabriel TANG, John CHILTON, Paolo
BECCARELLI
keynote speaker
Design for assembly – digital prefabrication of complex timber structures
Andreas FALK
Activities of Working Group 12
Fabian SCHEURER, Hanno STEHLING,
Franz TSCHÜMPERLIN, Martin
ANTEMANN
Timber Spatial Structures
part 1
WG 12-1 Room B
Lunch 12:45 – 14:00
Peter VON BUELOW
Frederik HALD, Poul Henning
KIRKEGAARD, Lars DAMKILDE
Mattias SCHEVENELS, Sean MCGINN,
Anke ROLVINK, Jeroen COENDERS
Francesco ROMEO
Behzad SHEKASTEHBAND, Karim ABEDI
Cristiana CHIORINO
Development of a Grasshopper Add-on
for Interactive Exploration of Shapes in
Equilibrium
Discrete design optimization accounting
for practical constraints
Novel Form-Finding of Tensegrity
Structures using an Optimization
Method
Pier Luigi Nervi: His construction system
for shell and spatial structures
Masaaki MIKI, Jun MITANI, Takeo
IGARASHI
An Integrated Computational Approach
for Creative Conceptual Structural
Design
Caitlin T. MUELLER, John A.
OCHSENDORF
Structural Morphology
Form Finding and optimization
WG 15-3 Room A3
Morning Session, 11:00 – 12:45
Beyond the Limits of Man
Problems and strategies for conservation Experimental Implementation of Selfof Pier Luigi Nervi’s heritage
Stress in Tensegrity Systems
Jianguo CAI, Jian FENG
Sergio PORETTI, Tullia IORI
keynote speaker
PLNP - Pier Luigi Nervi Project
Active control design of modular
Association: An institution devoted to
tensegrity structures
enhance the knowledge about Nervi and
to preserve his legacy
Sarah Badra AMOURI, Julien AVERSENG,
Jean François DUBE
Tension and Membrane Structures
Tensegrity Structures
Pier Luigi Nervi
Nervi: Heritage and Preservation
Marco NERVI
WG 6-3 Room A2
PLN-1 Room A1
TUESDAY, 24 September
IASS 2013 Symposium, Wroclaw
Integrated Analysis of Kinematic
Form Active Structures: PART B Numerical simulation of KFAS
Zak KOSTURA, Erin MORROW, Ben
URICK
Analysis, Design and Documentation
of a Form-Found Civic Sculpture for
Lower Manhattan
Krzysztof GERLIC
Design elements for membrane roofs Equilibrium in Spatial Structures
loaded by the snow
Using 3-D Reciprocal Diagrams
Petra GIDAK, Damir LAZAREVIC,
Kresimir FRESL
Fractals in form finding of
prestressed cable nets
The grid structures of Nervi’s first
hangars in Orvieto: Innovation in
context
Thomas W. LESLIE
Carpenter’s parametrics: Economics,
efficiency, and form in Pier Luigi
Nervi’s concrete designs
Paolo PERUGINI, Stefano ANDREANI
Pier Luigi Nervi’s columns: Flow of
lines and forces
Gabriele NERI
Pier Luigi Nervi’s reduced scale
models for HP shells
Silke PUYSTIENS, Maarten VAN
Alessandro BEGHINI, William BAKER
CRAENENBROECK, Marijke
MOLLAERT, Danny VAN HEMELRIJCK,
Wim VAN PAEPEGEM, Kim
CARBONEZ, Tien Dung DINH
Mario SASSONE, Edoardo PICCOLI
Sigrid ADRIAENSSENS, Landolf
RHODE-BARBARIGOS
Makoto OHSAKI
Activities of Working Group 13
Computational Methods
part 1
WG 13-1 Room C
Masatoshi SHIMODA, Takashi
MORIMOTO, Fuminori HAYASHI,
Yang LIU
Non-parametric Free-form
Optimization of Grid-shell Structures
Shape Optimization in the Design
Process of Lightweight Structures
Study on Basic Characteristics of
Integrated-Type Hanging Roof Made
of Timber
Structural Shape Optimization of
Free-Form Surface Shell Using Firefly
Algorithm
Study on the unity of architectural
art and structural function of
Dougong in Foguang temple
Shuzo HIROISHI, Akira OKADA, Naoya Natsuki TANAKA, Toshio HONMA
MIYASATO, Kosuke OGASAWARA,
Masao SAITOH
Anni SUN, Lei WANG
Shaking Table Experimental Test on
Balsa Wood Scale Structure
Lateral Resistance of PrestressedNon-linear Elastic Structural Curved
Tube Bolted Connection for Post-and- Splines
Beam Timber Construction
keynote speaker
Szende SZENTESI, Ovidiu PRODAN
Falko DIERINGER, Helmut
MASCHING, Roland WÜCHNER, KaiUwe BLETZINGER
Minjuan HE, Yi ZHAO, Renle MA
Timber Spatial Structures
part 2
WG 12-2 Room B
Coffee Break, 15:45 – 16:15
Masoud AKBARZADEH, Tom VAN
MELE, Philippe BLOCK
Branching Structures: Graphical
Statics and Manipulation of Form
Edmond P. SALIKLIS, Jonas H.
HOUSTON
Application of Graphical Methods in
Structural Design
Circles in optimum structural
topologies - rediscovering the wheel
Integrated Analysis of Kinematic
Form Active Structures – Part A:
Experimental Approach
Nervi and Candela: A dialogue
between engineering and
architecture
Structural Morphology
Graphical statics
WG 15-4 Room A3
Maarten VAN CRAENENBROECK,
Arkadiusz MAZUREK , William F.
Silke PUYSTIENS, Marijke MOLLAERT, BAKER
Danny VAN HEMELRIJCK, Wim
VAN PAEPEGEM, Lars DE LAET, Jan
ROEKENS
Tension and Membrane Structures
Computational Problems, part 1
WG 6-4 Room A2
Afternoon Session, 14:00 – 15:45
Beyond the Limits of Man
Juan Gerardo OLIVA-SALINAS,
Agustín RODALL-RODRIGUEZ, Eric
VALDEZ-OLMEDO
Pier Luigi Nervi
Nervi: Design Approaches
PLN-2 Room A1
TUESDAY, 24 September
IASS 2013 Symposium, Wroclaw
Parameter Design and Performance
Study of Disk Spring Temperature
Slip Joint
Inelastic Buckling Strength and
Ductility of Steel Latticed Plates for
Shear
Suduo XUE, Ping YANG, Xiong Yan LI
Tetsuo YAMASHITA, Ryota TAKEUCHI,
Kazuki SHIRATORI
Local stability investigation of doubly
corrugated cold-formed panels
Ryszard WALENTYŃSKI, Robert
Andrzej CYBULSKI
Experimental and numerical
investigation of collapse load of
laced built-up columns
Konstantinos KALOCHAIRETIS, Charis
GANTES
Metal Spatial Structures
Buckling and Realization, part 4
WG 8-4 Room D
14
Program
Tension and Membrane Structures
Computational Problems, part 2
In-A SIN, Seung-Deog KIM
Pier Luigi Nervi
Nervi: Shell and Spatial Structures
Sigrid ADRIAENSSENS, David
BILLINGTON
Nervi’s cantilevering stadium roofs:
Discipline of economy leads to
inspiration
Environmentally Compatible
Structures
part 1
WG 18-1 Room B
Timber-Based Material
Hybrid Systems for Improved
Environmental Performance
Felix Candela, Pier Luigi Nervi
and the Kuwait Sports Centre
competition in 1968
Marisela MENDOZA, Manuel
CRESCIANI
Yaser SHAHBAZI, Mohammad
Hui DING, Yaozhi LUO
Reza CHENAGHLOU, Karim ABEDI,
Mohammad Javad KHOSROWJERDI
Free and Forced Vibration Analyses A New Method of Generating grids
of Smart Orthotropic Cross-ply
on Free-form Surfaces
Cylindrical Membrane Shell Panel
Structural Expression in
Architectural Creation with Spatial
Grid Structure
Practical Use of Membrane Stress
Measurement Equipment through
Its Downsizing
Sigrid ADRIAENSSENS, Edward M.
SEGAL
Norfolk Scope Arena: A US dome
with a unique configuration of
interior ribs and buttresses
Development of Life Cycle Design
Method for Building-Proposal of
Design and Repair Plan
Andreas FALK
Weijing ZHANG, Gongke NIU,
Samar MALEK, Chris WILLIAMS
Yigang ZHANG
Progressive Collapse Assessment of Structural Implications of using
a Cable Dome Structure
Cairo Tiling and Hexagons in
Gridshells
Sang-Wook JIN, Hiroshi OHMORI
Yaxiong YAO
Ildiko BUCUR – HORVATH, Radu
SAPLACAN
Force lines embodied in the
building: Palazzetto dello Sport
Response modification factor of
pre-existing wood original historical
structure with FRP materials
Faryal sadat SIADATI, Reza emam
jome ZADE
Peng XU , Hiroshi OHMORI
Design Characteristics for
Environmentally Compatible
Structures
Dynamic Progressive Collapse
The Effect of Double Curvature
Analysis for Annular Crossed Cable- on the Structural Capacity of
truss Structure
Corrugated Gridshells
The ribbed floor slab systems of
Pier Luigi Nervi
keynote speaker
Petr VEGH
Ren Jie LIU, Su Duo XUE, Xuan Yi
YAO
Samar MALEK, John OCHSENDORF,
Tomasz WIERZBICKI
Petr VEGH
Activities of Working Group 18
S. Alireza BEHNEJAD, Gerard PARKE, Ludevit VEGH, Petr VEGH
Hoshyar NOOSHIN
Sphere Packing for Regularisation
The Principle of limits – a
of Lattice Domes
basic axiom of the theory of
environmentally compatible
structures
Structural Morphology
Grid shells
WG 15-5 Room A3
Afternoon Session, 16:15 – 18:00
Beyond the Limits of Man
Allison Beth HALPERN, David
Perkins BILLINGTON, Sigrid
ADRIAENSSENS
The Nonlinear Dynamic Analysis
of Zetlin-typed Cable Domes by
Bracing Reinforcement
WG 6-5 Room A2
PLN-3 Room A1
TUESDAY, 24 September
IASS 2013 Symposium, Wroclaw
Seita TSUDA, Makoto OHSAKI,
Yoshihiro KANNO
Analysis and Design of Deployable
Frames with Partially Rigid
Connections
Lorenzo GRECO, Arthur LEBÉE, Cyril
DOUTHE
Investigation of elastic behaviour
of reciprocal system using
homogenization technique
Deployment of Extendable Linked
Panel Unit
Masao TAKATSUKA, Hiroshi
OHMORI
Rostislav CHUDOBA, Matthias
SCHMERL, Jan VAN DER WOERD
Modelling framework for the
design and manufacturing of folded
shell structures
Computational Methods
part 2
WG 13-2 Room C
Design of the Steel Structure of
Chengdu Eastern Railway Station
Yan ZHANG, Li Wei WANG , Liwei
WANG, Zhiqiang CHENG
A Practical Method for Evaluation
of the Member Importance of
Existing Spatial Structures
Kejian XIAO, Yu LUO, Wen YANG,
Yuan FENG
Sability Analysis on the Steel
Roof of Chengdu Shuang-Liu
International Airport Terminal 2
Yongfeng LUO, Lisheng LUO
Stiffness-based Evaluating Method
of Element Importance of Truss
Systems
Jianguo CAI, Fan WANG, Feng JIAN
Toshimasa YANAGISAWA, Shoji
NAKAZAWA, Shiro KATO
Proposal of Seismic Loads for Single
Layer Reticular Domes
Metal Spatial Structures
Earthquake Response and
Performance, part 1
WG 8-5 Room D
15
Program
THURSDAY, 26 September
IASS 2013 Symposium, Wroclaw
Invited Plenary Lectures
Coffee Break 10:30 – 11:00
Mark Burry
The Periodic Table of the Polyhedral Universe
Michael BURT
Plenary Session 4
Morning Session, 9:00 – 10:30
Registration 8:30 – 16:15
Beyond the Limits of Man
room A
18
Program
Decision making process in formfinding
and modelling of membrane-structures
– case study of the Bajloni-marketplace
in Belgrade, Serbia
Roberto MAFFEI, Cédric GALLIOT, Rolf
LUCHSINGER, Alessandra ZANELLI
Jana LIPKOVSKI, Florian WEINMANN
Satwant S. RIHAL
Cooling tower fleet ranking strategy
Deflation Simulation and Experimental
Test of Inflatable Air Rib Structure
Generating asymmetric tensegrity
structures via truss topology
optimization
The Bearing Capacity Research about
Lower Chord Joints of the Erdos
Stadium Space Truss
Jong-Soo KIM, Duck Won CHO, YongHo LEE
Erection Engineering of South-Western
Dome Baseball Stadium
Lei KE, Qilin ZHANG, Bin YANG, Chen
ZHAO RONG, Yi Jie ZHAO, Yin HAI
PENG, Hong SHI
Thursday
Seismic Response Evaluation of Lattice
Domes Using Modal Pushover Analysis
Seyed Ahmad HOSSEINIZAD, Masood
ZIAEI
Dynamic Propagation of Local Collapse
in Single-layer Braced Barrel Vault
Space Structures
Mohammad MOHAMMADI, Karim
ABEDI, Naser TAGHIZADIEH
Seismic behavior of a medium-sized
dome structure
Soonpil KANG, Jongkook HONG,
Seungchang LEE
Evaluation of seismic performance for
single layer reticular domes based on
static analysis
Shoji NAKAZAWA, Naotaka TAKAHASHI,
Shiro KATO
Metal Spatial Structures
Earthquake Response and
Performance, part 2
WG 8-6 Room D
19
Program
Tomohiko KUMAGAI, Toru TAKEUCHI,
Toshiyuki OGAWA
Supporting Scheme of Structural Design Seismic Response Behavior of Single
for Steel Structures by Using MultiLayer Lattice Domes under Horizontal
Objective Optimization Method
Bi-directional Inputs
Coupled Form-Finding and Buckling
Optimization for Stability-Sensitive
Structures
Noriyasu HIRANO, Hiroshi OHMORI
Allison Beth HALPERN, Sigrid
ADRIAENSSENS
Zhao Rong CHEN, Qilin ZHANG, Bin
Jeroen COENDERS
YANG, Lei KE, Yi Jie ZHAO, Hai Peng YIN,
Wan Li XUE
Experimental Research on Space Truss
Open source engineering and
Joints of Erdos Sport Stadium
sustainability tools for the built
environment
Free-form Design of Tensegrity
Structures by Non-Rigid-Body Motion
Analysis
Qilin ZHANG, Yijie ZHAO, Bin YANG, Lei Jingyao ZHANG, Makoto OHSAKI
KE, Zhaorong CHEN, Haipeng YIN, Hong
SHI, Jie SHI
New Corinthians Stadium in Sᾶo Paulo
Lunch, 12:45 – 14:00
Geometric Exploration of Space
Networks Tetrahedrons with
inhomogeneous Sandwich Panel Cores
in Composite Materials
Omar Fabrisio AVELLANEDA LOPEZ
The Roskilde Domes 2011 and 2012
Computational Methods
part 3
WG 13-3 Room C
Werner SOBEK, Stephen HAGENMAYER, Yoshihiro KANNO
Andreas HOIER, Kerstin WOLFF
General Session
Case Studies, part 3
GEN-3 Room B
Parapluie - Ultra Thin Concrete Shell
Experimental research on the steel
made of UHPC by Activating Membrane truss substructure of Erdos sport
Effects
stadium
Manfred GROHMANN, Klaus
BOLLINGER, Philipp EISENBACH,
Ragunath VASUDEVAN, Stefan HAUSER
Martin TAMKE, Brady PETERS, Stig
Anton NIELSEN, Niels JAKUBIAK
ANDERSEN, Reese CAMPBELL,
Demetrios COMODROMOS, David
STASIUK
Designing pliable structural skins
Structural Morphology
Materials and fabrication, part 1
WG 15-6 Room A3
Morning Session, 11:00 – 12:45
Beyond the Limits of Man
Comparative study about the behaviour An Earth -Formed / Earth-Covered
of inflatable and Tensairity® arches
Reinforced Concrete Shell Design,
Construction and Earthquake
Performance
Nhu Cuong TRAN, Yves CROLET, Charles Jinghai GONG, Qingsong LI, Guozhi QIU, Henrik ALMEGAARD
TOULEMONDE, Nicolas SCHMITT, Alexis Haijuan DUAN, Zhongli LI
COURTOIS, Yves GENEST
Quality Assurance and Durability
of Concrete with Increased Acid
Resistance for Cooling Towers
Carsten RIECK, Roland HÜTTL, Dieter
BUSCH
Diagnostics and Maintenance of
Cooling Towers in Polish Power Plants
keynote speaker
Marek LECHMAN
Optimization of the Structural Response A new type of sheltering for disaster
of Cooling Tower Shells
affected sites: the ‘Clever roof’
Jan ROEKENS, Marijke MOLLAERT,
Lars DE LAET, Maarten VAN
CRAENENBROECK, Silke PUYSTIENS,
Vincent VIRGO
Tension and Membrane Structures
Air Inflated and Special Tension
Structures
Cooling and Solar Updraft Towers
Introduction
Reinhard HARTE
Activities of Working Group 3
Reinhard HARTE
WG 6-6 Room A2
WG 3-1 Room A1
THURSDAY, 26 September
IASS 2013 Symposium, Wroclaw
Responsive Textiles
João Victor CORREIA DE MELO, José
Luis Mendes RIPPER, Luís Eustáquio
MOREIRA
Development of bamboo structures
based on minimal surfaces and
natural formations
Staged protection and repair of
natural draught cooling towers
Christian KOTZ-POLLKLAESENR
Géraldine CAMP, Pierre CARREAUD,
Hervé LANÇON
Large structures and limit of Man:
Which solutions for the health
monitoring?
Repair of natural draft cooling
towers with flue gas feed line
Dirk Henning BRAUN, Phillipp
HOPPE
Elena VLASCEANU , Julian
LIENHARD, Jan KNIPPERS
Jiri BYDZOVSKY, Rostislav
DROCHYTKA, Amos DUFKA
Study on Progressive Collapse
Simulation of Spatial structure
Based on Transient Dynamic
Response
Xingyu YAN, Hiroshi OHMORI
Coffee Break, 15:45 – 16:15
Thin Concrete Barrel Vault
Proposal for Structural Design
Method of Rigid Frame Structures
Considering Redundancy
Nahoko IKEDA, Hiroshi OHMORI
A static relaxation algorithm for
motion-deformation analysis of
construction simulation
Development of CFRP PreMulti-objective Structural
tensioned Folded and Curved Shells Optimization of Space Truss
made of UHPFRC
Structures using Compact
Procedure Method and SPEA2
Matías Blas IMBERN, Carlos Felix
Zhong Quan WANG, Xiaoqun LUO,
RASPALL GALLI, Qi SU
Qilin ZHANG, Wanli XUE
Alexander Peter Bastian STARK,
Josef HEGGER
Single-curved shell structure made
out of textile-reinforced concrete
plate using a folding technique
Self-supporting free-form structures Tectonic Tessellations: from
using folding principles
Parametric Form-Finding to Robotic
Fabrication of Ceramic Shell
Structures
Martinus Willem KAMERLING
Ralf HERKRATH, Torsten POFAHL,
Martin TRAUTZ
Thinking Skins – Swarm-Bot
Building Envelopes
Rigidized inflatable structures a
production method for optimized
structures
Life Cycle Assessment of Repair and Adaptive Skins – Adaptive and
Maintenance Solutions for Cooling autoreactive building facades
Towers
Thermal Stress Reducing and
Seismic Isolation for Lattice
Structure by Rolling Device
Xiong Yan LI, Peng XIE, Suduo XUE
Nonlinear Dynamic Progressive
Collapse Analysis of Suspend Dome
Structure
Weijing ZHANG, Peng ZHANG ,
Gong Ke NIU
Nonlinear Dynamic Analyses of
a Grid Structure with Viscous
Dampers
Bin JIA, Xuan WANG, Qilin ZHANG,
Wanli XUE
Estimation of Damping
Characteristics for Steel Frame
Membrane Structure
Retrofit of Damaged Gymnasia
According to Response Control
Concept
Toru TAKEUCHI
Metal Spatial Structures
Earthquake Response and
Performance, part 3
Arno PRONK, Maurice DOMINICUS, Jan Dirk VAN DER WOERD, Rostislav Dong Ya AN, Jian ZHOU, Chengming Taro MIZUTANI, Osamu
Peter V BUELOW, Stan V DIJCK,
CHUDOBA, Josef HEGGER
LI, Hong Jun WANG
HOSOZAWA, Tatsuya ITOI
Joost VD KOPPEL
Yongfeng LUO, Yipeng LIU, Yi
WANG, Xiaonong GUO, Lei WANG
Tracing and Distinguishing the
Critical Points of Spatial Structures
Computational Methods
part 4
Dirk Henning BRAUN, Benedikt
BADER
Integrated quality assurance
concept with reference to planning
and implementation of cooling
tower refurbishment measures
supported by self and external
quality control.
Michel DONADIO, Clara FIUZA,
David TAYLOR
Evy VERWIMP, Tine TYSMANS,
Marijke MOLLAERT
Flexible formwork as reinforcement
for curved concrete structures
General Session
Shell Structures, part 1
Anke ROLVINK, Joost LAUPPE,
Jeroen COENDERS
Reinforcement Toolbox; a
Parametric Reinforcement
Modelling Tool for Curved
Structures
Structural Morphology
Materials and fabrication, part 2
Przemysław KOŁODZIEJ, Paweł
ŻYŁKA
Experimental research of the
adaptive building envelope (ABE).
WG 8-7 Room D
Helena EISENKREIN
WG 13-4 Room C
Tension and Membrane Structures
Adaptive Membranes
GEN-16 Room B
Cooling and Solar Updraft Towers
Maintenance
WG 15-7 Room A3
20
Program
WG 6-7 Room A2
Afternoon Session, 14:00 – 15:45
Beyond the Limits of Man
WG 3-2 Room A1
THURSDAY, 26 September
IASS 2013 Symposium, Wroclaw
Research on Mechanical Properties
of ETFE Film at Low Temperature
Zhao Rong CHEN, QiLin ZHANG,
Wan Li XUE
Experimental Research on
Mechanical Properties of PVC
Membrane after Aging
Unique design situations and
structural solutions of silos with
cylindrical shells
Jacek ABRAMCZYK
Peculiar Properties of Ruled
Surfaces Useful in Shaping Light
Gauge Steel Shells
Konstantina KOULATSOU,
Christoforos DIMOPOULOS, Charis
GANTES
Evaluation of Stiffening Types of
the Cutout in Tubular Wind Turbine
Towers via Dynamic Analysis
Cable Strengthened Arches
Yuichi KOITABASHI, Nobutaka
KASHIMOTO
The Design and Aging of the
Membrane Roof Structure of
Niigata’s Big Swan Stadium
Formulation of non-linear
incremental constitutive equation
of ETFE film structure considering
the dependence on temperature
change
Lianping YANG, Jiachun CUI, Minger WU
Analysis of Bearing Capacity of
Shallow Spherical Shells with
Supporting Ring under Action of
Concentrated Load with Three
Possible Schemes of Failure
Czeslaw BYWALSKI, Mieczyslaw
KAMINSKI, Mateusz MASZCZAK
Martinus Willem KAMERLING
Tatsuya YOSHINO, Shiro KATO
Tension and Membrane Structures
Materials
WG 6-8 Room A2
Vladimir V. SHUGAEV
General Session
Shell Structures, part 2
GEN-17 Room A1
THURSDAY, 26 September
IASS 2013 Symposium, Wroclaw
Martin TAMKE, David STASIUK,
Henrik Leander EVERS
Olivier BAVEREL, Alberto PUGNALE
Advanced application of the force
density method in multidisciplinary
design practice by incorporating
with optimization using analytical
derivatives
Rafael MERLI, Carlos LAZARO,
Salvador MONLEON, Alberto
DOMINGO
Nonlinear model for cylindrical
hexagon-grids. Application to the
behaviour of carbon nanotubes
Hiroki TAMAI
Computational Methods
part 5
WG 13-5 Room C
Kyung-Ju HWANG, Yongku KIM,
Daejoong KIM
Structural Design and Construction
of Ecological Steel Facade in the
Ecorium, Korea
Structural Behaviour of Reciprocal
Structures
Looking Back to the Future Oil Free
Urban Development
Calin MIRCEA, , Riyadh SALHAH
From Laboratory to the
Construction Site - Implementation
of an Innovative Material
Dario PARIGI, Poul Henning
KIRKEGAARD
Robustness Analysis of Typologies
of Reciprocal Timber Structures
Poul Henning KIRKEGAARD, Dario
PARIGI
Reciprocal Frames (RFs) Used for
Quick-built Deployable Emergency
Shelters
The Variational-Difference Method
for the Analysis of the Shells with
Complex Geometry
Ivan KUSHNARENKO, Vyacheslav
IVANOV
Numerical investigation on wakeinduced vibrations of a circular
cylinder behind a stationary square
cylinder in tandem
Antonio Mario FERREIRA, Isaias
VIZOTTO, Sebástian Moreno
CARDENAS
Wind Pressures on a Free Form
Shell
Reciprocal systems based on planar Growing Timber Structures –
elements: morphology and design Venation algorithms as alternative
explorations
approach to integrate design with
constraints from material, tectonics
and production
Olga POPOVIC-LARSEN, Daniel
Andreea-Terezia MIRCEA
Guangzhong LIU, Dai ZHOU,
SANG-HOON LEE
Zhaolong HAN
Structural Design of Durable
Topological Shell Using Inverted-T
CO2 Eco-Structure Units
Norihide IMAGAWA
Environmentally Compatible
Structures
part 2
WG 18-2 Room B
Toward double layer reciprocal
systems
Cyril DOUTHE, Olivier BAVEREL
Structural Morphology
Reciprocal and tensegrity
structures, part 1
WG 15-8 Room A3
Afternoon Session, 16:15 – 18:00
Beyond the Limits of Man
The Seismic Response of Interaction
between Truss Arch Frames and
Ceilings
Non-Structural Components and
Life-Safety in Large Rooms of
Spatial Structures
Koichiro ISHIKAWA
Ken’ichi KAWAGUCHI, Yosuke
NAKASO, Yoshiro OGI, Shunji OHYA
The research of construction
monitoring system in large and
complex steel structures
Yongfeng LUO, Zhiwu YE, Xiaonong
GUO, Xiaoming CHEN, Baorong JIA
Research on Health Monitoring
System Development for Spatial
Structures
Pengcheng YANG, Feng YU, Yaozhi
LUO, Yanfeng ZHENG
Han LI, Jia HU, QiLin ZHANG, Wanli
XUE
The Application of Modal
Parameter Analysis in Structure
Health Monitoring
General Session
Structural Health Monitoring and
Life Safety
GEN-15 Room D
21
Program
Xin ZHAO, Shixin JIANG
A Fiber Model for the Creep
and Shrinkage Analysis of
Mega SRC Columns
Xin ZHAO, Congzhi YAN
Differential Moisture
Distribution Analysis of Mega
SRC Columns
Hybrid Cooling Towers – A new
standard in urban areas
Raphaël MENARD, Etienne
FAYETTE, Paul AZZOPARDI
The Solar Mountains
Junichi KATO, Susumu
YOSHINAKA, Yoshiya
TANIGUCHI
Deployable Polyhedron Unit
with Stretchable Membrane
Lars DE LAET, Evy SLABBINCK,
Tom VAN MELE, Marijke
MOLLAERT, Philippe BLOCK
Case study: A modular, selftensioned, bending-active
canopy
Solution to the dynamic
stability problem of threelayered annular plate with
viscoelastic core
The Pseudo-dynamic Testing
of the Semi-rigid Steel-braced
Frame
Dorota PAWLUS
Jia LV, Haiying WAN, Qilin
ZHANG
Atsushi MUTOH, Shun
MURAMOTO, Akihiro MASUDA
Study on Nonlinear Vibration
Characteristics of RC/CFRC
Arches by Vibration Tests and
Simulations
General Session
Structural Modelling and
Computational Methods,
part 2
GEN-7 Room C
Dynamic Analysis of SODF
Space truss using Multistage
Homotopy Perturbation
Method
Coffee Break, 10:30 – 11:00
Sudeok SHON, Mina YOO,
Hyewon JO, Seungjae LEE,
Joowon KANG
Minimum Weight Design of
Corrugated Web Girder using
Differential Evolution Method
Finding of rational structure of
roof beam, using in automated
warehouses
Ivan I. VEDYAKOV, Denis KONIN, Sudeok SHON, Junhong HA,
Lidia SOSHNIKOVA
Seungjae LEE
Using Morphological indicators Parametric Analysis on Large
(MI) in transformable
Lightly Reinforced Concrete
structures to create a kit-ofWall Structures
part pedestrian bridge-system
Strength and Cracking Pattern
of Retrofitted Reinforced
Concrete Cylindrical Shells
under concentrated load
Xuan WANG, Bin JIA, Qilin
ZHANG, WanLi XUE
IFC-Based Model
Transformation for Spatial
Structures
General Session
Structural Modelling and
Computational Methods,
part 1
GEN-6 Room B
Creep Calculation Method for
the Steel-reinforced Concrete
Structures
Masafumi TANAKA, Kazuhiko
MASHITA
Maciej Grzegorz PIEKARSKI
Interrelation of Form, Force
and Movement in Convertible
Structures
Bernhard SILL
Structural Morphology
Transformable structures,
part 1
WG 15-10 Room A3
Morning Session, 9:00 – 10:30
Beyond the Limits of Man
Bruno BRISEGHELLA, Yue
FENG, Luigi FENU, Enrico
MAZZAROLO, Tobia ZORDAN
Lightweight Roofs of Adaptable An Optimization Index To
Carrying Capacity
Identify The Optimal Design
Solution of RC shell bridges
Aushim KOUMAR, Niels DE
Calin MIRCEA, Andrea HARCSA
TEMMERMAN, Lincy PYL
Jia LV, Qilin ZHANG, Jie WU,
Xiaoqun LUO
Daniela Mihaiela BOCA, Calin
Grigore Radu MIRCEA
Study of the Influence of
Concrete Creep upon the Elastic
Lateral Buckling of PC Girders
General Session
Materials, Durability and
Maintenance, part 1
GEN-13 Room A2
Sebastian HÖHLER, Dieter
LEHNEN
Strength of R/C shell under
combined axial and flexural
loadings
Matthias ANDRES, Reinhard
HARTE, Wilfried B. KRAETZIG,
Ralf WOERMANN
Large Natural Draught Cooling
Towers and their Structural
Sensitivity to Specific Subsoil
Conditions
Strategic Direction of
Protection and Refurbishment
Measures on Standard
Concrete Cooling Towers
for FGD Operation with
Consideration of VGB Guidline
612
Takashi HARA
Robert ENGELFRIED
Cooling and Solar Updraft
Towers
Structure
WG 3-3 Room A1
FRIDAY, 27 September
IASS 2013 Symposium, Wroclaw
Hong-liang QIAN, Ye LIU, XiaoFei JIN, Feng FAN, Shi-zhao
SHEN
Effect of Temperature Field on
Reflector of Shanghai 65 m
Radio Telescope
Low-cycle thermal fatigue of
steel structures
Numerical Simulation on
Wind-induced Vibrations of a
Long-span Cantilevered Roof
Considering the Fluid-Structure
Interaction Effect
Martin MAGURA, Jan
BRODNIANSKY
Peak Factor of Non-Gaussian
Wind Pressure on Cladding and
Components
Dai ZHOU, Guangzhong LIU, Jin
MA, Junlong LI
Qingshan YANG, Yuji TIAN
Rongchang YANG, Junling
CHEN, Renle MA, Zhaohua LV
Numerical Prediction of Wind
Load Effect on a Complex
monitoring Tower
General Session
Structural Modelling and
Computational Methods,
part 3
GEN-8 Room D
Joint Design on Galfan Cables
in Building Engineering
Junchao REN
Stainless Steel Single Shear
Bolted Connections by
Transient State Test Method
Yancheng CAI, Ben YOUNG
The Optimization Analysis of
the Assembling Cast-steel Joint
Study on mechanical
performance of typical cast
steel node
Lianping YANG, Chengming LI,
Dan LU
Qin YANG, Chengming LI ,
Junjun PAN
Charis J GANTES, Konstantina
KOULATSOU
Methodology for Nonlinear
Finite Element Analyses to
Evaluate Strength of Steel
Structures
General Session
Structural Modelling and
Computational Methods,
part 4
GEN-9 Room E
22
Program
Class Theta - a new kind of
tensegrity systems
Arno PRONK, Maurice
DOMINICUS, Jeroen
DA CONCEIÇÃO VAN
NIEUWENHUIZEN
Wind Tunnel Test at a Row of large Shear lag effect analysis of box
Natural Draught Cooling Towers
girder under varying lateral
loading locations
Fanghui LI, Ming GU , Xuanyi
ZHOU, Fan MENG
Actual measurements of the snow
load on the typical low rise roofs
Mazen AYOUBI , Günther RÖßLER, Michael Vincent VAN TELGEN,
Martin TRAUTZ, Michael RAUPACH Bert SNIJDER, Arjan HABRAKEN,
Jakob BEETZ
Experimental and Numerical
Parametric design and calculation
Investigation of Bond between
of circular and elliptical tensegrity
Glue-laminated Timber Elements
domes
and Self Tapping Screws
Faryal sadat SIADATI
Architectural and historical
investigation of old historic bridge
of Dezful
Hans-Jürgen NIEMANN, Bernhard
MICHELS, Wolfgang HUBERT,
Tobias PFISTER, Joachim MEYER,
Rüdiger HÖFFER
Potential of applying effective
wind load patterns in the
structural analysis of new and
existing cooling towers
Tobias PFISTER, Joachim MEYER,
Nicolas FICKLER
Matthias ANDRES, Daniele
CASUCCI, Ralf WOERMANN
Effect of different column support
systems on cooling tower design
under earthquake excitation
Considerations on the
recalculation of existing cooling
towers
Zbigniew Wojciech BIENIEK
Yijie ZHAO, Qilin ZHANG, Wanli
XUE
Hans RUSCHEWEYH
Friday
The Power dome, the kinetic
transformation of a Geiger dome
500 years of tensegrity: a
Leonardo swing-footbridge and a
new nautical device.
Reliability of reinforced concrete
walls of rape silo
Aeroelastic Performance of SuperLarge Cooling Tower Based on
Different Reduced-scale Models
Structural Morphology
Reciprocal and tensegrity
structures, part 2
WG 15-9 Room A3
Marek MAJ, Mieczyslaw KAMINSKI Richard Hugh BAKER
General Session
Materials, Durability and
Maintenance, part 2
GEN-14 Room A2
Lunch, 12:45 – 14:00
Initial Stress/Stress Concept in
Manipulation of Constitutive
Models for RC Beams and RC
Collumns Subject to Earthquake
Impact
Sergiu Ciprian CATINAS, Florin
Virgil TOSA
Calculations of dangerous
directions for seismic loads
Anton Valerievich FILIMONOV,
V.N. SIMBIRKIN, V.L. YAKUSHEV
Determination of Rayleigh
Damping Matrix of Cylindrical
Reticulated Shell under
Earthquake Excitation
Zhongye TIAN, Menglin LOU
Seismic Response of Steel
Structures in Energy Theorems
Ioana LADAR, Delia SUCIU
A Coupling Effect Included Inelastic
Time-dependent Structural
Analysis Method for Super-Tall
Building with Outriggers
XIN ZHAO, Bingquan YU
General Session
Structural Modelling and
Computational Methods,
part 5
GEN-10 Room B
Sudeok SHON, Hyojun WOO,
Seungjae LEE, Jaesung PARK
Linear Buckling Analysis of Twoway Diagonal Grid Walls for
Compression
Kazuki SHIRATORI, Tetsuo
YAMASHITA
Mock-up Test of Deployable
Structure using Meridian Grid
SunKyeong PARK , JePil JANG,
Seungdeog KIM
Stability of Shallow Arches
Junhong HA, Sudeok SHON,
Seungjae LEE
Damage Identification of Single
Layer Kewitte Latticed Spherical
Shell
Yi Gang ZHANG, Cai Wei LIU, Jin
Zhi WU
Influence of the pre-stress on the
stability of elastic grid shells
Romain MESNIL, John
OCHSENDORF, Cyril DOUTHE
Deployable Bar Structures of
Trapezial Type as Supports for
Light Gauge Steel Shells
Jacek ABRAMCZYK
A Study on Shear Buckling of
Sinusoidal Corrugated Plate
in Accordance with Boundary
Condition
Hwan Mok JUNG, Chang Mok SUK, Mina YOO, Sudeok SHON,
Cheol Hwan KIM
Seungjae LEE, Joowon KANG
Morphology Analysis of a Foldable A Study on the Buckling
Barrel Vault Structure
Characteristics of Single-Layer
Lattice Dome according to Section
Shape of Main Frames
Jianguo CAI, Jian FENG
Clément CARRIÈRE, Jean-Francois
CARON, Olivier BAVEREL, Philippe
LE MERRER
General Session
Structural Modelling and
Computational Methods,
part 7
GEN-12 Room E
23
Program
Revisiting the Problem of Buckling Dynamic relaxation for deployable
Mode Interaction in 2-DOF Models elastic ring simulation
and Built-up Columns
Maria LIVANOU, Charis GANTES,
Tassos AVRAAM
General Session
Structural Modelling and
Computational Methods,
part 6
GEN-11 Room D
A Digital Design Tool for Angulated Investigation of Effective Buckling
Scissor Structures Based on
Length Factor of Dome-typed
Architectural Surfaces
Space Frame in Accordance with
the Member rigidity
Kelvin ROOVERS, Lara ALEGRIA
MIRA, Niels DE TEMMERMAN
Integrated Framework for the
Sensitivity Analysis of Deployable
Planar Scissor Arches
Lara ALEGRIA MIRA, Niels DE
TEMMERMAN, Rajan FILOMENO
COELHO
A deployable stage design based
on the application of scissor
type structures, folding and
membranes system
Natalia Paola TORRES
Structural Morphology
Transformable structures,
part 2
WG 15-11 Room C
Morning Session, 11:00 – 12:45
Beyond the Limits of Man
Lin ZHAO, Yao-Jun GE, X. CHEN
Cooling and Solar Updraft
Towers
Actions
WG 3-4 Room A1
FRIDAY, 27 September
IASS 2013 Symposium, Wroclaw
FRIDAY, 27 September
IASS 2013 Symposium, Wroclaw
Plenary Lectures by Hangai Prize Awardees
room A
room A
room A
Annual General Meeting of the IASS
Closing Ceremony
Coffee Break 15:45 – 16:15
Hybrid Structures - Enlarging the Design Space of Architectural Membranes
Benedikt PHILIPP, Kai-Uwe BLETZINGER
Integrative Numerical Techniques for Fibre Reinforced Polymers - Forming Process and Analysis of
Differentiated Anisotropy
Frederic WAIMER, Riccardo LA MAGNA, Jan KNIPPERS
Active Vibration Control Method for Arch Structures Based on Acceleration Feedback
Ken’ichi MINOWA, Tomohiko KUMAGAI, Toshiyuki OGAWA
24
Program
Constraint-Based Graphic Statics: New paradigms of computer-aided structural equilibrium design
Corentin FIVET, Denis ZASTAVNI
Maximum Transparent Barrel-Vaulted Glass Roof
Kars HAARHUIS (Hangai Prize 2012 Awardee)
Conferral of IASS Hangai Prize 2013
Corentin FIVET
Ken’ichi MINOWA
Frederic WAIMER
Benedikt PHILIPP
Recipients:
Conferral of IASS Hangai Prize
and Plenary Lectures by the Recipients
Plenary Session 5
Afternoon Session, 14:00 – 17:00
Beyond the Limits of Man
IASS 2013 Symposium, Wroclaw
Beyond the Limits of Man
Program
25
List of Authors by Sessions
B
BADER Benedikt – WG 6-7
BAKER William F. – WG 15-4
BAKER Richard – WG 15-9
BALDASSINI Niccolò – WG 8-1
BARTEK Rastislav – GEN-1
BARUCKI Tadeusz – POL-1
BAVEREL Olivier – WG 15-8, GEN-2, GEN 12
BECCARELLI Paolo – WG 12-1
BEETZ Jakob – WG 15-9
BEGHINI Alessandro – WG 15-4
BEHNEJAD S. Alireza – POL-3, WG 15-5
BERTI Giovanni – GEN-1
BEZÁK Anton – GEN-2
BIENIEK Zbigniew Wojciech – WG 15-9
BILLINGTON David P. – PLN-3
BLETZINGER Kai-Uwe – Plenary Session 5, WG 13-1
BLOCK Philippe – WG 15-2, WG 15-4, WG 15-10
BOCA Mihaiela D. – GEN-13
BOLLINGER Klaus – WG 15-3, WG 15-6
BONDAREV Aleksey – WG 8-3
BOWN Adam – WG 6-2
BRAUN Dirk Henning – WG 6-7, WG-15-7
BRISEGHELLA Bruno – GEN-6
BRODNIANSKY Ján – GEN-8
BUCUR-HORVÁTH Ildikó – PLN-3
BURT Michael – Plenary Session 4
BUSCH Dieter – WG 3-1
BUSSE Jonathan – GEN-4
BYDŽOVSKÝ Jiři – WG 3-2
BYWALSKI Czeslaw – GEN-17
C
CAI Jianguo – WG 6-3, WG 8-5, WG 15-11
CAI Yancheng – GEN-9
CAMMELLI Stefano – GEN-1
CAMP Géraldine – WG 3-2
CAMPBELL David M. – WG 6-1, WG 6-2
CAMPBELL Reese – WG 15-6
CAPSONI Fabio – GEN-2
CARBONEZ Kim – WG 6-4
CARDENAS Sebástian Moreno – WG 13-5
CARON Jean-François – GEN-2, GEN-12
CARPENTER Jeffrey A. – WG 6-1
CARREAUD Pierre – WG 3-2
CARRIÈRE Clément – GEN-12
CASUCCI Daniele – WG 3-4
CĂTINAŞ Sergiu – GEN-10
CHEN Junling – GEN-8
CHEN X. – WG 3-4
CHEN Xiaoming – GEN-15
CHEN Zhaorong – WG 6-8, GEN-3
CHENAGHLOU Mohammad Reza – WG 6-5, WG 8-1
CHENG Zhiqiang – WG 8-5
CHILTON John – WG 12-1
CHIORINO Cristiana – PLN-1
CHO Duck Won – GEN-3
CHUDOBA Rostislav – WG 13-2, GEN-16
COENDERS Jeroen – WG 13-3, WG 15-3, WG 15-7
COLABELLA Sofia – WG 12-1
COMODROMOS Demetrios – WG 15-6
CORREIA DE MELO João Victor – WG 6-7
COURTOIS Alexis – WG 3-1
CRESCIANI Manuel – PLN-3
CROLET Yves – WG 3-1
CUI Jiachun – WG 6-8
CULATTI Michele – GEN-4
CURRY John – WG 15-2
CYBULSKI Robert – WG 8-4
Index
A
ABBASI MOUSAVI Mehdi – WG 8-1
ABEDI Karim – WG 6-3, WG 6-5, WG 8-1, WG 8-6
ABEL John F. – Plenary Session 2, POL-1
ABRAMCZYK Jacek – GEN-12, GEN-17
ADRIAENSSENS Sigrid – PLN-3, WG 13-1, WG 13-3
AGÓCS Zoltán – GEN-2
AKBARZADEH Masoud – WG 15-4
ALEGRIA MIRA Lara – WG 15-11
ALIPRANDI Stefano – WG 12-1
ALMEGAARD Henrik – WG 15-6
AMOURI Sarah – WG 6-3
AN Dongya – WG 13-4
ANDREANI Stefano – PLN-2
ANDRES Matthias – WG 3-3, WG 3-4
ANTEMANN Martin – WG 12-1
AVELLANEDA LOPEZ Omar F. – WG 15-6
AVERSENG Julien – WG 6-3
AVRAAM Tassos P. – GEN-11
AYOUBI Mazen – GEN-14
AZZOPARDI Paul – WG 3-3, WG 8-2
IASS 2013 Symposium, Wroclaw
Beyond the Limits of Man
26
D
D’AMICO Bernardino – WG 12-1
da CONCEIÇÃO van NIEUWENHUIZEN Jeroen B. – WG 15-9
DAMKILDE Lars – WG 6-3
de ANGELIS Paolo – GEN-4
DE LAET Lars – WG 6-4, WG 6-6, WG15-10
De TEMMERMAN Niels – WG 15-10, WG 15-11
DIERINGER Falko – WG 13-1
DIMOPOULOS Christoforos – GEN-17
DING Hui – WG 15-5
DINH Tien Dung – WG 6-4
DINI Matteo – WG 8-1
DOMINGO Alberto – WG 13-5
DOMINICUS Maurice M. – WG 15-7, WG 15-9
DONADIO Michel – WG 3-2
DONG Yaomin – GEN-5
DOUTHE Cyril – WG 13-2, WG 15-8, GEN-11
DROCHYTKA Rostislav – WG 3-2
du PELOUX Lionel – GEN-2
DUAN Haijuan – WG 6-6
DUBÉ Jean-François – WG 6-3
DUFKA Amos – WG 3-2
E
EISENBACH Philipp – WG 15-6
EISENKREIN Helena – WG 3-2
ENGELFRIED Robert – WG 3-3
ESCOBEDO David – WG 15-2
ESTRADA Giovani – WG 8-1
EVERS Henrik Leander – WG 18-2
F
FALK Andreas – WG 18-1
FAN Feng – GEN-8
FAYETTE Etienne – WG 3-3, WG 8-2
FENG Jian – WG 6-3, WG 8-5, WG 15-11
FENG Yuan – WG 8-5
FENG Yue – GEN-6
FENU Luigi – GEN-6
FERREIRA Antonio Mario – WG 13-5
FICKLER Nicolas – WG 3-4
FILIMONOV A.V. – GEN-10
FILOMENO COELHO Rajan – WG 15-11
FIORE Andrea – WG 12-1
FIÚZA Clara – WG 3-2
FIVET Corentin – Plenary Session 5
FLAGA Kazimierz – POL-2
FRESL Krešimir – WG 6-4
FROLI Maurizio – WG 8-1
G
GALLIOT Cédric – WG 6-6
GANTES Charis – WG 8-4, GEN-9, GEN-11, GEN-17
GAO Zhan Yuan – WG 6-3
GE Yao-Jun – WG 3-4
GELLIN Slade – WG 6-1
GENEST Yves – WG 3-1
GERLIC Krzysztof – WG 6-4
GIAMPELLEGRINI Laurent –GEN-4
GIDAK Petra – WG 6-4
GIULIANI Gian Carlo – GEN-2, GEN-4
GIULIANI Mauro Eugenio – GEN-2, GEN-4
GIURDANELLA Valeria – WG 12-1
GOLA Jolanta – POL-2
GONG Jinghai – WG 6-6
GONG Zhenchao – GEN-2
GOÑI Josu – GEN-5
GÖPPERT Knut 94 – – WG 6-2
GRECO Lorenzo – WG 13-2
GROHMANN Manfred – WG 15-6
GU Ming – GEN-4
GUO Xiaonong – GEN-15
H
HA Junhong – GEN-7, GEN-12
HAASE Walter – GEN-1
HABRAKEN Arjan P.H.W. – WG 15-9
HAGENMAYER Stephen – GEN-3
HALD Frederik – WG 6-3
HALPERN Allison B. – PLN-3, WG 13-3
HAN Zhaolong – WG 13-5
HARA Takashi – WG 3-3
HARCSA Andrea – GEN-6
HARDING John – WG 15-2
HARTE Reinhard – WG 3-1, WG 3-3
HAUSER Stefan – WG 15-6
HAYASHI Fuminori – WG 13-1
HE Minjuan – WG 12-2
HEGGER Josef – GEN-16
HELBIG Thorsten – GEN-4
HENRIQUE Carlos – WG 6-1
HERKRATH Ralf – WG 15-7
HINCZ Krisztián – WG 15-2
HIRANO Noriyasu – WG 13-3
HIROISHI Shuzo – WG 12-2
HÖFFER Rüdiger – WG 3-4
HOFMANN Arne – WG 15-3
HOGG Tony – WG 6-2
HÖHLER Sebastian – WG 3-3
HOIER Andreas – GEN-3
HONG Jongkook – WG 8-6
HONMA Toshio – WG 13-1
HOPPE Phillipp – WG 15-7
HOSOZAWA Osamu – WG 8-7
HOSSEINIZAD Ahmad – WG 8-6
HOUSTON Jonas H. – WG 15-4
HU Jia – GEN-15
HUBERT Wolfgang – WG 3-4
HÜTTL Roland – WG 3-1
HWANG Kyung-Ju – WG 18-2
I
IGARASHI Takeo – WG 15-3
IKEDA Nahoko – WG 13-4
IMAGAWA Norihide – WG 18-2
IMBERN Matías B. – GEN-16
Program
IASS 2013 Symposium, Wroclaw
Beyond the Limits of Man
Program
27
INSAUSTI Aimar – GEN-2
IORI Tullia – PLN-1
IRISARRI ALONSO Luis – WG 8-3, GEN-5
ISHIKAWA Koichiro – GEN-15
ITOI Tatsuya – WG 8-7
IVANOV Vyacheslav N. – WG 13-5, WG 15-1
J
JAKUBIAK ANDERSEN Niels – WG 15-6
JANATA Vladimír – GEN-1
JANG JePil – WG 15-11
JIA Baorong – GEN-15
JIA Bin – WG 8-7, GEN-6
JIANG Shixin – GEN-13
JIN Sang-Wook – WG 6-5
JIN Xiao-Fei – GEN-8
JING Tian-Fang – GEN-1
JO Hye Won – GEN-6
JUNG Hwan Mok – GEN-11
K
KALOCHAIRETIS Konstantinos E. – WG 8-4
KAMERLING Wim M.W. – GEN-5, GEN-16, GEN-17
KAMINSKI Mieczyslaw – GEN-14, GEN-17
KANG Joo Won – GEN-6, GEN-12
KANG Soonpil – WG 8-6
KANNO Yoshihiro – WG 13-2, WG 13-3
KASHIMOTO Nobutaka – WG 6-8
KATO Junichi – WG 15-10
KATO Shiro – WG 6-8, WG 8-2, WG 8-1, WG 8-5
KAWAGUCHI Ken’ichiGEN-15
KE Lei – GEN-3
KHOSROWJERDI Mohammad Javad – WG 6-5
KIM Cheol Hwan – GEN-11
KIM Daejoong – WG 18-2
KIM Jong-Soo – GEN-3
KIM Seung-Deog – WG 6-5, WG 15-11
KIM Yongku – WG 8-2
KIRKEGAARD Poul Henning – WG 6-3, WG 15-8
KITRICK Christopher J. – WG 15-1
KNIPPERS Jan – WG 6-7, Plenary Session 5
KODO Yasuaki – WG 8-2
KOITABASHI Yuichi – WG 6-8
KOLODZIEJ Przemyslaw – WG 6-7
KONIN Denis V. – GEN-5, GEN-6
KOSTURA Zak – WG 6-4
KOTZ- POLLKLÄSENER Christian – WG 3-2
KOULATSOU Konstantina – GEN-9, GEN-17
KOUMAR Aushim – WG 15-10
KOZINA Irma – POL-3
KRAETZIG Wilfried B. – WG 3-3
KUMAGAI Tomohiko – WG 8-6
KUSHNARENKO Ivan V. – WG 13-5, WG 15-1
L
LA MAGNA Riccardo – Plenary Session 5
LADAR Ioana – GEN-10
LANCIA Daniele – WG 12-1
LANÇON Hervé – WG 3-2
ŁĄTKA Jerzy F. – GEN-4
LAUPPE Joost – WG 15-7
LAZAREVIČ Damir – WG 6-4
LÁZARO Carlos – WG 13-5
Le MERRER Philippe – GEN-12
LEBÉE Arthur – WG 13-2
LECHMAN Marek – WG 3-1
LEE Seung Jae – GEN-6, GEN-7, GEN-11, GEN-12
LEE Seungchang – WG 8-6
LEE Yong-Ho – GEN-3
LEHNEN Dieter – WG 3-3
LENGYEL András – WG 15-2
LESLIE Thomas – PLN-2
LEWIS Harri – WG 15-2
LI Chengming – WG 13-4, GEN-9
LI Fanghui – GEN-14
LI Han – Plenary Session 2, GEN-15
LI Junlong – GEN-8
LI Qingsong – WG 6-6
LI Si Yao – WG 8-3
LI Xiong Yan – WG 6-3, WG 8-3, WG 8-4, WG 8-7
LI Yaming – WG 8-2
LI Zhongli – WG 6-6
LIENHARD Julian – WG 6-7
LIPKOVSKI Jana – WG 6-6
LIU Cai Wei – GEN-12
LIU Guangzhong – WG 13-5, GEN-8
LIU Ren Jie – WG 6-5
LIU Yang – WG 13-1
LIU Ye – GEN-8
LIU Yipeng – WG 13-4
LIVANOU Maria A. – GEN-11
LLOYD Jeremy – GEN-1
LOU Menglin – GEN-10
LU Dan – GEN-9
LU Lei – GEN-2
LUCHSINGER Rolf – WG 6-6
LUKEŠ Miloslav – GEN-1
LUO Lisheng – WG 8-5
LUO Xiaoqun – WG 13-4, GEN-13
LUO Yaozhi – WG 15-5, GEN-15
LUO Yongfeng – WG 8-5, WG 13-4, GEN-15
LUO Yu – WG 8-5
LV Jia – GEN-7
LV Zhaohua – GEN-8
LYNCH Karen A. – WG 6-1, WG 6-2
M
MA Jialin – GEN-5
MA Jin – GEN-8
MA Renle – WG 12-2, GEN-8
MAFFEI Roberto – WG 6-6
MAGURA Martin – GEN-8
MAJ Marek – GEN-14
MAJOWIECKI Massimo – POL-2, GEN-1
MALEK Samar – WG 15-5
MASCHING Helmut – WG 13-1
IASS 2013 Symposium, Wroclaw
Beyond the Limits of Man
28
MASHITA Kazuhiko – GEN-13
MASUDA Akihiro – GEN-7
MASZCZAK Mateusz – GEN-17
MAZUREK Arkadiusz – WG 15-4
MAZZAROLO Enrico – GEN-6
McGINN Sean – WG 15-3
MENARD Raphaël – WG 3-3
MENDOZA Marisela – PLN-3
MENG Fan – GEN-14
MERLI Rafael – WG 13-5
MESNIL Romain – GEN-11
MEYER Joachim – WG 3-4
MICHELS Bernhard – WG 3-4
MIKI Masaaki – WG 15-3
MINOWA Ken’ichi – Plenary Session 5
MIRCEA Andreea-Terezia – WG 18-2
MIRCEA Călin G.R. – WG 18-2, GEN-6, GEN-13
MITANI Jun – WG 15-3
MIYASATO Naoya – WG 12-2
MIZUTANI Taro – WG 8-7
MOHAMMADI Mohammad – WG 8-6
MOLLAERT Marijke – WG 6-4, WG 6-6, WG 115-10,
GEN-16
MONLEÓN Salvador – WG 13-5
MONTICELLI Carol – WG 12-1
MOREIRA Luís Eustáquio – WG 6-7
MORIMOTO Takashi – WG 13-1
MORROW Erin – WG 6-4
MOSKALENKO Vladimir – WG 8-3
MOTRO Réne – POL-2
MUELLER Caitlin – WG 15-3
MURAMOTO Shun – GEN-7
MUTOH Atsushi – GEN-7
N
NAKASO Yosuke – GEN-15
NAKAZAWA Shoji – WG 8-2, WG 8-5, WG 8-6
NIELSEN Stig Anton – WG 15-6
NERI Gabriele – PLN-2
NERVI Marco – PLN-1
NEUHAEUSER Stefan – GEN-1, GEN-4
NIEMANN Hans-Jürgen – WG 3-4
NIU Gong Ke – WG 6-5, WG 8-7
NOOSHIN Hoshyar – WG 15-5
O
OBRĘBSKI Jan B. – Plenary Session 1, POL-1
OCHSENDORF John – WG 15-3, WG 15-4, GEN-11
OGASAWARA Kosuke – WG 12-2
OGAWA Toshiyuki – Plenary Session 5
OGI Yoshiro – GEN-15
OHMORI Hiroshi – WG 6-5, WG 13-2, WG 13-3, WG 13-4,
WG 18-1
OHSAKI Makoto – WG 13-2, WG 13-3
OHYA Shunji – GEN-15
OKADA Akira – WG 12-2
OLIVA-SALINAS Juan Gerardo – PLN-2, WG 6-1
OPPE Matthias – GEN-4
ORŁOWSKI Bolesław – POL-1
P
PAECH Christoph – WG 6-2
PALFI Andrej – GEN-2
PAN Junjun – GEN-9
PARENTI Bianca – WG 12-1
PARIGI Dario – WG 15-8
PARK Jae Sung – GEN-11
PARK SunKyeong – WG 15-11
PARKE Gerard – POL-3, WG 15-5
PAULETTI Ruy Marcelo O. – WG 6-1
PAWLUS Dorota – GEN-7
PEARSON Will – WG 15-1
PELCZARSKI Michał – POL-3
PERUGINI Paolo – PLN-2
PETERS Brady – WG 15-6
PFISTER Tobias – WG 3-4
PHILIPP Benedikt – Plenary Session 5
PICCOLI Edoardo – PLN-2
PIEKARSKI Maciej – WG 15-10
POFAHL Thorsten – WG 15-7
PONE Sergio – WG 12-1
POPOVIC LARSEN Olga – WG 15-8
PORETTI Sergio – PLN-1
PORTO Cláudia Estrela – POL-2
PRODAN Ovidiu – WG 12-2
PRONK Arno D.C. – WG 15-7, WG 15-9
PUGNALE Alberto – WG 15-8
PUYSTIENS Silke – WG 6-4, WG 6-6
PYL Lincy – WG 15-10
Q
QIAN Hong-liang – GEN-8
QIU Guozhi – WG 6-6
R
RASPALL GALLI Felix – GEN-16
RAUPACH Michael – GEN-14
REN Junchao – GEN-9
RHODE-BARBARIGOS Landolf – WG 13-1
RIECK Carsten – WG 3-1
RIHAL Satwant S. – WG 15-6
RIPPER José Luis Mendes – WG 6-7
RIPPMANN Matthias – WG 15-2
RODALL RODRIGUEZ Agustín – PLN-2
ROEKENS Jan – WG 6-4
ROLVINK Anke – WG 15-3, WG 15-7
ROMEO Francesco – PLN-1
ROOVERS Kelvin – WG 15-11
RÖßLER Günther – GEN-14
RUSCHEWEYH Hans P. – WG 3-4
S
SAITOH Masao – WG 12-2
SALHAH Riyadh – WG 18-2
SALIKLIS Edmond P. – WG 15-4
Program
IASS 2013 Symposium, Wroclaw
Beyond the Limits of Man
Program
29
SANCHEZ-ALVAREZ Jaime – WG 8-1
SANG-HOON LEE Daniel – WG 15-8
SĂPLĂCAN Radu – PLN-3
SASSONE Mario – PLN-2
SAWODNY Oliver – GEN-1
SCHEURER Fabian – WG 12-1
SCHEVENELS Mattias – WG 15-3
SCHMERL Matthias – WG 13-2
SCHMITT Nicolas – WG 3-3
SCHWARNOWSKI Kamil – WG 8-1
SEGAL Edward M. – PLN-3
SHAHBAZI Yaser – WG 6-5
SHEKASTEHBAND Behzad – WG 6-3
SHEN Shi-zhao – GEN-8
SHEPHERD Paul – WG 15-1
SHEPPERD Piers – GEN-1
SHI Hong – GEN-3
SHI Jie – GEN-3
SHIMODA Masatoshi – WG 13-1
SHIRATORI Kazuki – WG 8-4, GEN-11
SHON Sudeok – GEN-6, GEN-7, GEN-11, GEN-12
SHUGAEV Vladimir V. – GEN-17
SIADATI Faryal sadat – WG 18-1, GEN-14
SILL Bernhard – WG 15-10
SIMBIRKIN V.N. – GEN-10
SIN In-A – WG 6-5
SIVIERO Enzo – GEN-4
SLABBINCK Evy – WG 15-10
SNIJDER H.H. – WG 15-9
SOBEK Werner – GEN-1, GEN-3, GEN-4
SOSHNIKOVA Lidia S. – GEN-6
STARK Alexander – GEN-16
STASIUK David – WG 18-2, WG 15-6
STEHLING Hanno – WG 12-1
STEIN Michael – WG 6-2
STOCCO Alessandro – GEN-4
SU Qi – GEN-16
SUCIU Delia – GEN-10
SUK Chang Mok – GEN-11
SUN Anni – WG 12-2
SZENTESI Szende – WG 12-2
TAYLOR David – WG 3-2
TIAN Yuji – GEN-8
TIAN Zhongye – GEN-10
TOKUDA Kenta – WG 8-3
TORRES Natalia P. – WG 15-11
TOŞA Florin – GEN-10
TOTARO Andrea – GEN-4
TOULEMONDE Charles – WG 3-1
TRAN Nhu-Cuong – WG 3-1
TRAUTZ Martin – GEN-14
TRAVUSH Vladimir L. – GEN-5
TSCHÜMPERLIN Franz – WG 12-1
TSUDA Seita – WG 13-2
TYSMANS Tine – GEN-16
T
TACHI Tomohiro – WG 15-2
TAGHIZADIEH Naser – WG 8-6
TAKAHASHI Naotaka – WG 8-6
TAKATSUKA Masao – WG 13-2
TAKEUCHI Ryota – WG 8-4
TAKEUCHI Toru – WG 8-6, WG 8-7
TAMAI Hiroki – WG 13-5
TAMKE Martin – WG 18-2
TANAKA Masafumi – GEN-13
TANAKA Natsuki – WG 13-1
TANG Gabriel – WG 12-1
TANIGUCHI Yoshiya – WG 8-3, WG 15-10
TARCZEWSKI Romuald – WG 15-1
TARNAI Tibor – WG 15-2
TAYEB Frédéric – GEN-2
W
WAIMER Frédéric – Plenary Session 5
WALENTYŃSKI Ryszard – WG 8-4
WAN Haiying – GEN-7
WANG Fan – WG 8-5
WANG Hongjun – WG 13-4
WANG Lei – WG 12-2, WG 13-4
WANG Liwei – WG 8-5
WANG Xuan – WG 8-7, GEN-6
WANG Yi – WG 13-4
WANG Zhongquan – WG 13-4
WEI Shen – WG 8-2
WEICKGENANNT Martin – GEN-1
WEINMANN Florian – WG 6-6
WIERZBICKI Tomasz – WG 15-5
WILLIAMS Chris – WG 15-5
U
URICK Ben – WG 6-4
UZKUDUN Ivan – GEN-5
V
VALDEZ OLMEDO Eric – PLN-2
VAN CRAENENBROECK Maarten – WG 6-4, WG 6-6
van de KOPPEL Joost W. – WG 15-7
Van der WOERD Jan Dirk – GEN-16
van DIJCK Stan H.M. – WG 15-7
VAN HEMELRIJCK Danny – WG 6-4
Van MELE Tom – WG 15-4, WG 15-10
VAN PAEPEGEM Wim – WG 6-4
van TELGEN Michael V. – WG 15-9
VANKO Marcel – GEN-2
VASUDEVAN Ragunath – WG 15-6
VEDYAKOV Ivan I. – GEN-6
VEGH Ludevit – WG 18-1
VEGH Petr – WG 18-1
VERWIMP Evy – GEN-16
VIERLINGER Robert – WG 15-3
VIRGO Vincent – WG 6-6
VISCUSO Salvatore – WG 12-1
VIZOTTO Isaias – WG 13-5
VLASCEANU Elena – WG 6-7
von BUELOW Peter – WG 15-3, WG 15-7
IASS 2013 Symposium, Wroclaw
Beyond the Limits of Man
Program
30
WITTE Christoph – GEN-4
WOERMANN Ralf – WG 3-3
WOJTYSZYN Bogusław J. – WG 15-1
WOLFF Kerstin – GEN-3
WOLKOWICZ Christian – WG 8-1
WOO Hyo Jun – GEN-11
WU Jie – GEN-13
WU Jin Zhi – GEN-12
WU Ming-er – WG 6-8
WÜCHNER Roland – WG 13-1
X
XIAO Kejian – WG 8-5
XIE Peng – WG 8-7
XU Peng – WG 18-1
XU Zhou – GEN-1
XUE Suduo – WG 6-3, WG 6-5, WG 8-4, WG 8-7
XUE Wanli – WG 6-8, WG 8-2, WG 8-7, WG 13-4, GEN-3,
GEN-6, GEN-14, GEN-15
Y
YAKUSHEV V.L. – GEN-10
YAMASHITA Tetsuo – WG 8-4, GEN-11
YAN Congzhi – GEN-13
YAN Xingyu – WG 13-4
YAN Yanjun – Plenary Session 3
YANAGISAWA Toshimasa – WG 8-2, WG 8-5
YANG Bin – GEN-3, GEN-5
YANG Lianping – WG 6-8, WG 8-2, GEN-9
YANG Pengcheng – GEN-15
YANG Ping – WG 8-4
YANG Qin – GEN-9
YANG Qingshan – GEN-8
YANG Rongchang – GEN-8
YANG Weibiao – GEN-2
YANG Wen – WG 8-5
YAO Xuan Yi – WG 6-5, WG 8-3
YAO Yaxiong – WG 15-5
YE Zhiwu – GEN-15
YÉPEZ Jesus – WG 6-1
YIN Haipeng – GEN-3
YOO Mina Na – GEN-6, GEN-12
YOSHINAKA Susumu – WG 15-10
YOSHINO Tatsuya – WG 6-8
YOUNG Ben – GEN-9
YU Bingquan – GEN-10
YU Feng – GEN-15
YUAN Zhongjin – GEN-2
YUGOV Anatoliy – WG 8-3
Z
ZABŁOCKI Wojciech – Plenary Session 3
ZADE Reza emam jome – WG 18-1
ZANELLI Alessandra – WG 6-6, WG 12-1
ZASTAVNI Denis – Plenary Session 5
ZHANG Jingyao – WG 13-3
ZHANG Peng – WG 8-7
ZHANG Qilin – Plenary Session 3, WG 6-8, WG 8-2, WG
8-7, WG 13-4, GEN-3, GEN-6, GEN-5, GEN-7, GEN-13,
GEN-14, GEN-15
ZHANG Wei Jing – WG 6-5, WG 8-6
ZHANG Yi Gang – WG 6-5, GEN-12
ZHANG Yan – WG 8-5
ZHAO Lin – WG 3-4
ZHAO Xin – GEN-5, GEN-10, GEN-13
ZHAO Yi – WG 12-2
ZHAO Yijie – GEN-3, GEN-14
ZHENG Yanfeng – GEN-15
ZHOU Dai – WG 13-5, GEN-8
ZHOU Jian – WG 13-4
ZHOU Xuanyi – GEN-14
ZIAEI Masood – WG 8-6
ZORDAN Tobia – GEN-6
ZYLKA Paweł – WG 6-7