Single Jacket Aerial Cable Multitube Structure AERO

Single Jacket Aerial Cable Multitube Structure AERO

The information is believed to be correct at the time of issue. Fibrain reserves the right to change this specification without prior notice. This specification is not contractually valid unless specifically authorised by Fibrain. Buyer and/or user of this product has
to make sure before using this product that it is suitable for the intended use. All questions of liability relating to this product are subject – in accordance with the prevailing – to the Terms of Sale of the selling Fibrain subsidiary.
Type:
Created:
Modified:
AERO-AS04
01/01/2014
REV: 0
SK
Single Jacket Aerial Cable Multitube Structure
AERO AS04
PE Sheath
Aramid yarns reinforcement
Filling Gel
Central Strength Member (FRP)
Loose Tubes with filling gel (PBT)
Water blocking Yarns
Fillers
Optical fibers
Waterblocking Tape
Ripcord
*not in scale
APPLICATION:
For installation on poles or in ducts.
Good resistance to traction and compression
Fully dielectric cable
Self-supported aerial cable with aramid reinforcements
UV resistant
STRUCTURE AND COMPOSITION:
FRP strength and anti-buckling element Ø 2,1mm
Optical fibres
Loose tube jelly filled (PBT Ø 2.0mm)
6-12 elements SZ stranded cable core
Dry yarns to prevent moisture into cable
Aramid yarns as tensile elements
PE Outer Sheath
BASIC CABLE PARAMETERS:
Qnt
Version
1T x 12F
2T x 6F
2T x 12F
4T x 6F
6T x 4F
3T x 12F
3T x 6F
4T x 12F
8T x 6F
6T x 12F
12T x 6F
8T x 12F
12T x 12F
Fibers
Fibers
per tube
12
12
24
24
24
36
36
48
48
72
72
96
144
12
6
12
6
4
12
6
12
6
12
6
12
12
Total
elements
Active
tubes
Ø nominal
(+-5%)
[mm]
6
1
10,2
6
2
10,1
6
2
10,2
6
4
10,1
4
6
10,1
6
3
10,2
6
6
10,1
6
4
10,2
8
8
11.3
6
6
10,2
12
12
13,8
8
8
11,4
12
12
13,9
Other Fiber counts available on demand
Nominal
weight
(+-10%)
[kg/km]
75
75
76
76
76
80
76
80
97
82
142
102
151
Max.
tensile
load short
term [N]
4100
4100
4150
4150
4200
4200
4150
4200
4150
4200
4100
4200
4100
Max.
tensile
load long
term [N]
2090
2300
2120
2600
2800
2200
2600
2200
2600
2200
2600
2200
2200
MECHANICAL AND ENVIRONMENTAL CHARACTERISTICS
Crush performance
2000N [N/10 cm]
EN 187101, IEC 60794-1-2-E3, no attenuation increase
Bending performance
10 [cycles (15x D) ]
EN 187101, IEC 60794-1-2-E11, no attenuation increase
Water penetration
3m sample, 1m head, 24h
IEC 60794-1-2-F5, no leakage
Temperature range:
Installation
Operation
Transport & Storage
Maximum Allowable Tension (MAT)
-15... +55 [°C]
-40… +70 [°C]
-40… +70 [°C]
EN 187101, IEC 60794-1-2-F1, no attenuation increase
4,1 kN
Maximum Operational Tension (MOT) 2,1 kN
Fibrain Sp. z o.o., ul. Wspólna 4a, 35-205 Rzeszów, Poland tel:+48 17 866 08 12; email:[email protected]; web: www.fibrain.com
1
Type:
Created:
Modified:
AERO-AS04
01/01/2014
REV: 0
SK
The information is believed to be correct at the time of issue. Fibrain reserves the right to change this specification without prior notice. This specification is not contractually valid unless specifically authorised by Fibrain. Buyer and/or user of this product has
to make sure before using this product that it is suitable for the intended use. All questions of liability relating to this product are subject – in accordance with the prevailing – to the Terms of Sale of the selling Fibrain subsidiary.
APPLICATION AND CABLE SPAN CHARACTERISTIC
6 Tubes Construction:
Loading Conditions
NSC Light
NSC Light
NSC Medium
NSC Light
NSC Medium
NSC Heavy
Span
[m]
280
Installed Sag (2%)
[m]
5,6
190
3,8
100
2
Span
[m]
220
Installed Sag (2%)
[m]
4,4
160
3,2
Force
[N]
4680
3480
4630
2116
2860
4431
Total Sag
[m]
11,5
7,1
8,2
3,2
3,7
4,4
Force
[N]
4100
3210
4141
2050
2687
4105
Total Sag
[m]
8,8
5,9
6,8
2,9
3,3
4,0
8 Tubes Construction:
Loading Conditions
NSC Light
NSC Light
NSC Medium
NSC Light
NSC Medium
NSC Heavy
90
1,8
OPTICAL FIBER AND LOOSE TUBES COLOR IDENTIFICATION
The colors of identifications see on DSH_Colors_CODE_XXXX
FIBER PARAMETERS
The value of characteristic fibers parameters see on DSH_OFP
M ARKING
The following printing (white hot foil indentation) is applied at 1-meter intervals.
• Supplier: FIBRAIN
• Standard Code (Product Type, Fiber Type, Fiber Count): Duct SM xx F
• Year of manufacture: xxxx
• Length marking in meters
• Cable ID/ Drum No
Example: FIBRAIN AERO AS04 SJ T20 12F SM G652D 2T6F
"YEAR OF MANUFACTURE"
"LASER SYMBOL”
“LENGTH MARKING"
“BATCH NUMBER”
The accuracy of marking is ± 0.5%. Occasional loss of printing and remarking is in accordance with Bellcore GR 20 and supersedes earlier
markings. Cables can be supplied with a range of single mode or multimode fibers and customized printing.
PACKAGING
The cables will be shipped on disposable wooden or treated wooden drums. The inner and outer ends of the cable will be capped and made
accessible for testing. A direction of rotation arrow is marked on the drum together with the identification information.
DELIVERY LENGTH
2000 – 8000 meters ± 5%, with an allowance of supplying a maximum of 5% of a total contract quantity as short length cables which should be
above 1000 meters long. Tolerance of 5 % of on Order Quantity shall be allowed.
ANNEX – drawings:
*not in scale
Fibrain Sp. z o.o., ul. Wspólna 4a, 35-205 Rzeszów, Poland tel:+48 17 866 08 12; email:[email protected]; web: www.fibrain.com
2