Wygeneruj PDF do wydruku

Subject: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Posted by kamel on Fri, 16 Sep 2011 18:18:39 GMT
View Forum Message <> Reply to Message
Mam problem. Posiadam w swoim laptopie dwie grafiki nvidia ge force gt540m i intel HD graphics
3000. Chce zainstalować sterowniki do intela bo chyba byłoby łatwiej niz przełączać sie
na nvidie. Nie wiem jak sie za to zabrać i skąd pobrać takie sterowniki. Zależy mi żeby
był openGl aby uruchomic gre urbanterror.
Subject: Odp: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Posted by Tomahawk on Fri, 16 Sep 2011 19:11:46 GMT
View Forum Message <> Reply to Message
Sterowniki do intela są otwarte i masz je już w systemie. Czy Urban Terror na nich zadziała
to nie wiem. Przełącz w BIOSIE na nVidie i zainstaluj stery proponowane przez system
Wtedy Urban Terror na pewno zadziała ;) Przełączanie kart w trakcie działania systemu
jest na razie eksperymentalne i musiałbyś się trochę bawić z konfigurację. Jeżeli nie
lubisz grzebać/testować to działaj na razie na jednej z kart i wróć do tematu jak już
rozwiązanie będzie stabilne.
Pozdrawiam
Subject: Odp: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Posted by kamel on Fri, 16 Sep 2011 20:51:47 GMT
View Forum Message <> Reply to Message
W biosie szukałem opcji jak zmienić te karty ale niestety nie znalazlem. :(
Subject: Odp: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Posted by adam.chyla on Fri, 16 Sep 2011 22:33:39 GMT
View Forum Message <> Reply to Message
Podaj wynik lspci
Możliwe, że masz aktywną kartę NVIDII.
Subject: Odp: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Page 1 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Posted by kamel on Sat, 17 Sep 2011 10:44:29 GMT
View Forum Message <> Reply to Message
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller
(rev 09)
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root
Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family
Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1
(rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller
(rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller
(rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation Device 0df4 (rev a1)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter
(PCI-Express) (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller (rev 06)
Subject: Odp: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Posted by luck_skywalker on Sat, 17 Sep 2011 22:52:02 GMT
View Forum Message <> Reply to Message
Do tego jest potrzebny "tryb gadatliwy" lspci
#lspci -k
lub
Page 2 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
#lspci -vv
lub
#lspci -vvv
Szukaj takiego wyrażenia pod kartami video
Kernel driver in use:
Może to rozjaśni trochę sytuację.
Subject: Odp: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Posted by kamel on Sun, 18 Sep 2011 07:49:42 GMT
View Forum Message <> Reply to Message
Znalazłem takie coś w programie hardinfo, nie wiem czy o to samo chodzi co kernel in use.
dla intela:
kernel modules: i915
dla nvidi:
kernel modules: nvidi-current, novueau, nvidiafb
Logi w spoilerze
Logi
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller
(rev 09)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root
Port (rev 09)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family
Integrated Graphics Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 15f2
Kernel driver in use: i915
Kernel modules: i915
Page 3 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1
(rev 04)
Subsystem: ASUSTeK Computer Inc. Device 1277
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#2 (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller
(rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1ac3
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#1 (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller
(rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation Device 0df4 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 15f2
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter
(PCI-Express) (rev 01)
Page 4 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Subsystem: AzureWave Device 2c37
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: r8169
Kernel modules: r8169
lspci -vv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller
(rev 09)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+
>SERR- <PERR- INTxLatency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root
Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-dd0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREnCapabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
Page 5 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family
Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 15f2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at dd400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1
(rev 04)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at df60a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df608000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Page 6 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller
(rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1ac3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at df600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dec00000-df5fffff
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREnCapabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Page 7 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Memory behind bridge: de200000-debfffff
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREnCapabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd800000-de1fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREnCapabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df607000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Page 8 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller
(rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df606000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxInterrupt: pin C routed to IRQ 11
Region 0: Memory at df605000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation Device 0df4 (rev a1) (prog-if 00 [VGA
controller])
Page 9 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Subsystem: ASUSTeK Computer Inc. Device 15f2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at d000 [size=128]
Expansion ROM at dd000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter
(PCI-Express) (rev 01)
Subsystem: AzureWave Device 2c37
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at de200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at a000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Page 10 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
lspci -vvv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller
(rev 09)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+
>SERR- <PERR- INTxLatency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root
Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-dd0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREnCapabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family
Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 15f2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
Page 11 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at dd400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1
(rev 04)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at df60a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df608000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller
(rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1ac3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
Page 12 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at df600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dec00000-df5fffff
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREnCapabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: de200000-debfffff
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Page 13 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd800000-de1fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR<PERRBridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2BPriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREnCapabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller
#1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df607000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTx-
Page 14 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller
(rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df606000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxInterrupt: pin C routed to IRQ 11
Region 0: Memory at df605000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation Device 0df4 (rev a1) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device 15f2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Page 15 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at d000 [size=128]
Expansion ROM at dd000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter
(PCI-Express) (rev 01)
Subsystem: AzureWave Device 2c37
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTxStatus: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at de200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 1277
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERRFastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort>SERR- <PERR- INTxLatency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at a000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
Page 16 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum
// większe logi opatruj spoilerem lub umieszczaj w serwisach typu wklej.org - moderator
Subject: Odp: Instalacja sterowników do zintegrowanej grafiki w ubuntu 11.04
Posted by fervi on Sun, 02 Oct 2011 19:31:38 GMT
View Forum Message <> Reply to Message
Twój sprzęt ma w standardzie Nvidia Optimus?
Fervi
Page 17 of 17 ---- Generated from
Linuksowe by FUDforum 2.8.1
Linuksowo.pl - Linux forum - Polskie Forum