IMS 13 Drilling and milling sub-system

Table of Contents
Table of Contents
Technika automatyzacji
IMS Industrial mechatronics system
Mechatronics Sub-Systems with Siemens PLC
IMS 13 Drilling and milling sub-system
1
2
2
4
5
S7-300 PLC control system with accessories:
8
Lucas Nülle GmbH
1/9
www.lucas-nuelle.pl
Technika automatyzacji
Acquire practical and project-oriented laboratory skills and expertise:
Automation trainers, mechatronics trainers, PLC trainers
IMS Industrial mechatronics system
Lucas Nülle GmbH
2/9
www.lucas-nuelle.pl
IMS Industrial mechatronics system
The "Industrial Mechatronics System" (IMS) allows industrial-type automated installations of varying degrees of
complexity to be modelled. IMS is a modular system that can be employed with great flexibility and the modular
design also makes it easily extensible. This means that systems can be put together taking into account
students’ previous knowledge and can be expanded as they learn more.
Use of authentic industrial components means that trainees can get to grips with work more quickly after
completing their training
It is possible to handle a dual training scenario using only a single system: educational by integrating the
system with UniTrain/multimedia courses or industrial, involving connection to an industrial PLC system
Small projects can be conducted using IMS individual components especially the conveyor belt and subsystems.
The possibility of connecting directly to PROFIBUS means less wiring and a more easily understood
structure
Trainees understand the functional processes and the interplay between signalling states quicker thanks
to the possibility of reading I/O signals directly from the system. Tapping into signal states via an
external control system is not impossible but the status LEDs make it unnecessary
More complex tasks can be assembled using IMS sub-systems. These involve combinations of individual
IMS components to provide additional functionalities.
The fact that various parts of the system can easily be separated from it means that it is no problem to
construct customised lessons
Complete production lines with carrier return systems can be put together using IMS sub-systems.
Multiple-layered projects constructed in this way require a fundamental knowledge of IMS sub-systems.
Lucas Nülle GmbH
3/9
www.lucas-nuelle.pl
Mechatronics Sub-Systems with Siemens PLC
Mechatronics Sub-Systems with Siemens PLC
All IMS sub-systems are composed of several individual IMS components. They can be connected to any
programmable logic controller by means of standard connectors. Before IMS sub-systems are connected in
larger installations, the requisite knowledge and skills should be learned with the aid of multi-media UniTrain-I
courses.
IMS sub-systems with Siemens S7 and experiment manuals: it is of course also possible to follow the
conventional route and connect a sub-system to an industrial-type programmable logic controller and put
it into operation.
Training objectives for sub-systems:
Analysis of functional relationships
Set-up and adjustment of sensors
Introduction to electrical and pneumatic function modules
Configuration of mechatronics sub-systems
Investigation of the flow of energy and information
PLC programming
Lucas Nülle GmbH
4/9
www.lucas-nuelle.pl
IMS 13 Drilling and milling sub-system
IMS 13 Drilling and milling sub-system
A workpiece carrier with the bottom part of a workpiece is placed on the conveyor belt. The drilling and cutting
station has a controllable cutting head which reams out the internal contour of the workpiece section. The
cutting head can be moved in three axes in order to work on the component. Afterwards the workpiece carrier
with its workpiece is moved to the end of the conveyor belt to be passed on to the next sub-system.
Wyposazenie podstawowe, w sklad którego wchodzi:
Wyposażenie podstawowe, w skład którego wchodzi:
Pos.
nazwa produktu
Bestell-Nr.
Anz.
1 Drilling and milling station
LM9688
1
2 Segment przenosnika transportowego 24 V z podwójnym pasem
LM9606
1
3 Płyta uchwytu przedmiotu obrabianego
LM9620
1
4 Część dolna przedmiotu obrabianego, kolor biały
LM9623
1
5 Część dolna przedmiotu obrabianego, kolor czarny
LM9624
1
Lucas Nülle GmbH
5/9
www.lucas-nuelle.pl
Akcesoria:
Pos.
nazwa produktu
Bestell-Nr.
Anz.
6 Przewód interfejsu 25-biegunowy, gniazdo/wtyczka Sub-D
LM9061
1
7 Kabel interfejsu szeregowego 9/9-biegunowy, dł. 1,8 m
LM9040
1
Materialy szkoleniowe:
Materiały szkoleniowe:
Pos.
nazwa produktu
Bestell-Nr.
Anz.
8
SO6200-1X
1
9 Interactive Lab Assistant: IMS 13 Drilling and milling station
SO2800-5L
1
Dodatkowo warte polecenia:
In areas where there are high levels of humidity the membrane dryer
with water trap should be used to avoid condensation:
Pos.
nazwa produktu
Bestell-Nr.
Anz.
10 Sprężarka, cichobieżna
SE2902-9L
1
11 Węże i zestaw akcesoriów do systemów mechatronicznych
LM9670
1
12 Mobilne stanowisko doświadczalne IMS, SybaPro, 1200 mm,
dwupoziomowe Rama doświadczalna
ST7200-3T
1
13 Osłona ochronna do stanowisk doświadczalnych IMS 1200 mm z
panelem szkoleniowym
ST8010-8L
1
Lucas Nülle GmbH
6/9
www.lucas-nuelle.pl
14 Osuszacz membranowy IDG3 z szybkozłączem i filtrem AF20 z
separatorem wody
LM9671
1
IMS/IPA Tester and Fault Simulator
Pos.
nazwa produktu
Bestell-Nr.
Anz.
15 IMS/IPA test and fault simulator
CO3713-7V
1
16 Kabel interfejsu szeregowego 9/9-biegunowy, dł. 1,8 m
LM9040
2
17 Przewód interfejsu 25-biegunowy, gniazdo/wtyczka Sub-D
LM9061
2
18 QuickChart IMS test and fault simulator
SO6200-1Z
1
Lucas Nülle GmbH
7/9
www.lucas-nuelle.pl
S7-300 PLC control system with accessories:
Pos.
nazwa produktu
Bestell-Nr.
Anz.
19 SIMATIC S7-313C 2DP, 16 DE, 16 DA, Profibus, zasilacz sieciowy 24 CO3713-8C
V/6A
1
20 IMS Moduł przyłączeniowy do PLC
CO3713-7F
1
21 Adapter PLC-S7 PC z przetwornikiem USB / MPI
SO3713-5E
1
Oprogramowanie:
Pos.
nazwa produktu
Bestell-Nr.
22 Oprogramowanie szkoleniowe 1x STEP 7, S7-GRAPH, S7-SCL,
PLC-Sim (niemiecki, angielski, francuski, hiszpański, włoski)
SO6002-1Q
Anz.
1
Materialy szkoleniowe:
Materiały szkoleniowe:
Pos.
nazwa produktu
Bestell-Nr.
Anz.
23 QuickChart SiemensSPS S7 Board, Instrukcje bezpieczeństwa
SO6200-5A
1
24 QuickChart Siemens SPS S7 Board, montaż i uruchomienie
SO6200-5B
1
25 CLC30, podstawy PLC, dokumentacja SIMATIC na DVD (D, GB, F, E)
SO5155-1N
1
Akcesoria:
Pos.
nazwa produktu
Bestell-Nr.
26 Kabel połączeniowy do PROFIBUS z gniazdem PG i terminatorem
Lucas Nülle GmbH
8/9
LM9182
Anz.
2
www.lucas-nuelle.pl
27 Kabel połączeniowy do PROFIBUS, na metry
LM9181
5
28 Narzędzie do usuwania izolacji z kabli PROFIBUS
LM9184
1
29 Bezpieczny przewód pomiarowy, 4 mm, 100 cm, niebieski
SO5126-9A
1
30 Bezpieczny przewód pomiarowy, 4 mm, 100 cm, czerwony
SO5126-8U
1
Lucas Nülle GmbH
9/9
www.lucas-nuelle.pl