Powertekk Silence Tile
Transkrypt
Powertekk Silence Tile
PL Powertekk Silence Tile Steel roof covering with sound dampening Isola Powertekk Exclusive is a steel based, light weight roof covering system designed to provide an attractive and economic finish for all types of roofs down to 8° pitch. Isola Powertekk Exclusive tile is manufactured from cold rolled, galvanized steel and weighs only 5,0 kg/m². The steel thickness combined with the Exclusive profile provides superior strength and stability of the tiles. On the back side Powertekk Silence Tile is provided with 6 pcs sound dampning pads. Material description Powder coating Epoxy primer Galvanization (275 g/m2) Cold rolled steel 0,45 mm Galvanization Polyester Sound dampening pads New building and renovation for all slopes from 8º - 90º. Good quality breathing underlayer is recommended. Isola Powertekk Exclusive can be installed at all temperatures likely to be met in roofing works. However at temperatures below 5°C extra care is required, particularly when driving nails and cutting and bending tiles. On roof pitches above 8° there shall as a minimum be installed a breather membrane designated for use in supported and unsupported pitched roof applications, including warm, hybrid and cold roofs. Counterbattens and battens 30 x 50 mm are recommended. Other dimensions may be used according to local regulations and good practice. Standard flashings are made to fit 30 mm high battens. Where the rafters are widely spaced, the dimension of the tile battens should be chosen accordingly to comply with local regulations for load bearing capacity. Please note that the maximum width of the batten is 65 mm. Installation should be done from ridge to eaves, starting with the second horisontal row from the ridge, which will be the first row of full tiles. No special recommendations. Powertekk Silence Tile Steel roof covering with sound dampening A comprehensive range of accessories for Nordic including eaves, ridge, gable end covers and ventilators completes the system. Article number 750015 750014 750037 750027 740013 740014 740026 740042 Color Black Anthracite Green Winered Black matt Anthracite matt Terracotta matt Brown matt Properties Value Steel thickness: 0,45 mm Zinc coating: 275 g/m² Batten distance: 371 mm Roof slope: 8º - 90º Tile dimension: 1198 x 418 mm Covered area: 1110 x 371 mm Consumption: 2,44 pcs/m² Side overlap: 88 mm Weight / tile: 2,2 kg Weight / m²: 5,3 kg Snow load capacity: 2,1 kN/m² Dimensional changes: 12 x 10 External fire performance: Broof(t1), Broof(t2), Broof(t3) Technical aproval: EN 14782:2005 / SINTEF Byggforsk (No.2265) Working temperature: min 5ºC Packaging: 200 tiles / pallet, 82 m² / pallet -6 -1 K for steel