(„winda towarowa”) - seria średnia T3
Transkrypt
(„winda towarowa”) - seria średnia T3
P R Z E D S I Ę B I O R S T W O U S Ł U G B U D O W L A N Y C H Sp. z o.o. Biuro: 05–300 Mińsk Mazowiecki, ul. Kościuszki 13 tel: +48 25 759-06-18; fax: +48 25 759-56-85 RACK AND PINION MATERIALS HOIST. MEDIUM SERIES T3-10/15 The base is equipped with level screws and a safety enclosure. The cabin is equipped with two folding doors for loading and one ramp door for unloading, all of them can be dismantled and interchanged. The sections, cabin, enclosure, etc. are all galvanised in hot-dip steel. Over-speed emergency brake installed on an independent pinion. The mast sections and many of the components are compatible with our work platforms PW-18/35. This rack hoist of 1.500 kg was mounted in a renovation site in which was necessary to discharge even in the flat-roof also in the balcony floors. The telescopic tight allowed to hold with total security the machinery to the facade even had no near the wrought. The discharge ramps were made specially to adapt the width of the doors from the balcony. At that moment the cabin of the hoist hadn't been painted yet.At present all the cabins are in a hot-dip galvanised steel and aluminion which make the machine not only an excellent aspect but also a wonderful aspect and a longer useful life. Siedziba: ul. Marywilska 58, 03 – 042 Warszawa Bank Pekao S.A. w Warszawie NIP 526-21-78-411 http://www.dzwigbud.com.pl KRS 0000127010 Nr konta: 62 1240 5963 1111 0000 4794 9812 REGON 013011717 e-mail: [email protected] Technical Card: CHARACTERISTICS MODELS T3-10 T3-15 T3-15/G Maximum load 1000 Kg 1500 Kg 1500 Kg Maximum speed 24 m/min 24 m /min 18 m/min Engine power 2 x 4 kW 2 x 5,5 kW 2 x 5,5 kW Cabin size 1,8 x 2 m 1,8 x 2 m 3x2m 3,2 x 2,5 m 3,2 x 2,5 m 4,3 x 2,5 m 1,5 m / 74 Kg 1,5 m / 74 Kg 1,5 m / 74 Kg 120 m 120 m 120 m 220/380 V - III 220/380 V - III 220/380 V - III 48 V 48 V 48 V Base dimensions Height / Weight mast section Maximum standard height Power supply Control voltage 2