LED PAR 64 SLIM 7x0W RGBW - PS0710 - Flash
Transkrypt
LED PAR 64 SLIM 7x0W RGBW - PS0710 - Flash
LASER MINI RG+ 8x GOBO+ RE F4000153 USER MANUAL / INSTRUKCJA OBSŁUGI LASER MINI RG+ 8x GOBO+ RE F4000153 Table of contents 1 Introduction ...................................................................................................................................................... 2 2 Safety information ........................................................................................................................................... 2 3 PRODUCT INFORMATION .......................................................................................................................... 3 4 INSTALLATION.............................................................................................................................................. 3 5 Connections ...................................................................................................................................................... 3 5.1 Voltage specification .................................................................................................................................. 3 5.2 Connecting power supply ........................................................................................................................ 4 6 Operation manual ............................................................................................................................................ 4 6.1 Control panel .............................................................................................................................................. 4 Spis treści 1. Wprowadzenie ................................................................................................................................................. 4 2. Zasady bezpieczeństwa .................................................................................................................................. 4 4. Instalacja ........................................................................................................................................................... 5 5. Połączenia ......................................................................................................................................................... 5 5.1 Specyfikacja zasilania................................................................................................................................. 5 5.2 Podłączanie zasilania ................................................................................................................................. 5 6. Instrukcja użytkowania ................................................................................................................................... 6 6.1 1 Panel sterowania ........................................................................................................................................ 6 www.flash-butrym.pl 1 INTRODUCTION Thank you for purchasing LASER MINI RG+ 8x GOBO+ RE. For safety reasons and to ensure the troublefree operation, carefully read the instructions. 2 SAFETY INFORMATION 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Installation should be done by qualified personnel in order to minimize the risk of accidental electric shock Disconnect the power supply before installation. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you notice any signs of damage you should contact your dealer immediately. Do not connect the device to the mains. Do not use the device in high humidity conditions and at temperatures above 40° C The device must be installed on stable structures The unit must be well protected against moisture, dust and shaking. Do not use the product in dusty environment. The distance between lighting and illuminated object should be greater than 1 meter. Ensure the fan is not blocked. Do not look into the laser source. Do not turn the device on and off frequently. Please turn the unit off for 15 minutes after two hours of operation. Ensure that the laser system is properly cooled. Do not touch the laser lighting with wet hands and do not pull the power line. Prevent the laser light from strong vibration. In case of any problems please contact your distributor. Be sure that the power supply parameters is matched with the parameters marked on the device. Installation should be made by professional technician. Be sure that there is no flammable or explosive subject nearby. The distance from the light source and other object should be at least 0,5m (at least 15cm from walls). Please check whether the fan and the ventilation holes are not blocked. If the device is suspended, make sure that the security cable is able to lift at least ten times its weight. For security reasons it is important to properly ground the unit. Warning! When installing the device make sure that it is mounted in a way that prevents the people from the audience to look directly into the light. This carries the risk of eye damage. Avoid contact with eyes. Never look at the laser equipment or directly in the laser beam. Provisions concerning the use of the laser may vary depending on the country. User is legally responsible for the use of the device depending on location / country. www.flash-butrym.pl 2 LASER MINI RG+ 8x GOBO+ RE F4000153 3 PRODUCT INFORMATION Laser power: green 30mW@532nm; red 100mW@650nm Rated power: 5W AC adapter: DC 5V/1A Beam specifications: laser source: diode laser class: RG + 8x GOBO Preheating time: 5-10m Control: Auto, Sound Work Mode: sound active, automatic Cooling system: Fan system Working environment: 10-35 degrees indoor The device receives the full power of light after the normal working temperature) Accessories: power cable Remote Controll manual power supply: AC100V-240V, 50-60Hz dimensions: 185x140x85mm weight: 0.4kg 4 INSTALLATION After removing the packaging, check if the device was not damaged during transport. Before connecting to the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage caused by unstable mounting. Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are consistent with device requirements. All activities, including connecting the device to the mains must be performed by qualified personnel. 5 CONNECTIONS The device is equipped with the following interfaces: 1. 5.1 Power (in): AC power supply adapter Voltage specification 3 Input Voltage Total Power Frequency 100~240V 100mW 50/60Hz www.flash-butrym.pl 5.2 Connecting power supply The connection is performed using AC power supply adapter. The device must be operated by qualified personnel. Make sure that the power grid supply parameters are consistent with device parameters and limitations are not exceeded. CAUTION! In the case of cable damage do not attempt to repair. Replacement or repair can be made only on the manufacturer or by a person with appropriate permissions. 6 OPERATION MANUAL 6.1 Control panel The control panel is equipped with display and 4 control buttons: 1. 2. 3. 4. 1. Motor controller Music/Auto Stroboflash Controller Stroboflash ON/OFF WPROWADZENIE Dziękujemy za zakup urządzenia LASER MINI RG+ 8x GOBO+ RE. Ze względów bezpieczeństwa oraz w celu zapewnienia bezawaryjnej pracy urządzenia należy dokładnie zapoznać się z instrukcją. 2. ZASADY BEZPIECZEŃSTWA 1. 2. 3. 4. 5. Instalacja powinna być przeprowadzana przez wykwalifikowany personel, aby zminimalizować ryzyko przypadkowego porażenia prądem Przed instalacją należy odłączyć urządzenie od sieci Przed podłączeniem urządzenia do sieci energetycznej należy sprawdzić, czy nie jest ono uszkodzone mechanicznie. Jeżeli widoczne są jakiekolwiek ślady uszkodzenia należy niezwłocznie skontaktować się z dystrybutorem. Nie podłączać urządzenia do sieci elektrycznej. Nie należy korzystać z urządzenia w warunkach dużej wilgotności powietrza oraz w temperaturze powyżej 40° C Urządzenie należy instalować na stabilnych konstrukcjach www.flash-butrym.pl 4 LASER MINI RG+ 8x GOBO+ RE F4000153 3. INFORMACJE O PRODUKCIE Zasilanie: AC100V-240V, 50-60Hz AC adapter: DC 5V/1A Laser: green 30mW@532nm Tryby pracy: sound active, automatic Czas nagrzewania: 5-10m Temperatura pracy: 10-35*C Wymiary: 185x140x85mm Waga: 0,4kg Pilot Bezprzewodowy 4. INSTALACJA Po wyjęciu urządzenia z opakowania należy sprawdzić czy nie zostało ono uszkodzone podczas transportu. Przed podłączeniem do sieci elektrycznej należy upewnić się, że urządzenie zamocowane jest stabilnie. Producent nie ponosi odpowiedzialności za uszkodzenia spowodowane niestabilnym zamocowaniem urządzenia. Podczas korzystania z urządzenia należy zadbać o poprawne podłączenie go do sieci elektrycznej oraz prawidłowe uziemienie. Należy upewnić się, że parametry sieci elektrycznej są zgodne z wymaganiami urządzenia. Wszelkie czynności obejmujące obsługę w zakresie podłączania urządzenia do sieci elektrycznej powinny być wykonywane przez wykwalifikowany personel. 5. POŁĄCZENIA Urządzenie wyposażone jest w następujące interfejsy: 1. 5.1 Zasilanie (wejście):zewnętrzny zasilacz Specyfikacja zasilania 5.2 Napięcie zasilania Pobór mocy Częstotliwość zasilania 100~240V 100mW 50/60Hz Podłączanie zasilania Połączenie odbywa się przy użyciu zintegrowanego przewodu zakończonego wtyczką sieci elektrycznej. Urządzenie musi być obsługiwane przez wykwalifikowany personel. Należy upewnić się, że parametry zasilania sieci energetycznej są zgodne z parametrami urządzenia i nie zostają przekroczone ograniczenia dotyczące poboru energii elektrycznej z sieci. 5 www.flash-butrym.pl UWAGA! W przypadku uszkodzenia przewodu nie należy dokonywać samodzielnej naprawy. Wymiana lub naprawa może być wykonana jedynie w serwisie producenta lub przez osobę z odpowiednimi uprawnieniami. 6. INSTRUKCJA UŻYTKOWANIA 6.1 Panel sterowania Panel sterowania wyposażony jest w 4 przyciski sterujące: 1. 2. 3. 4. Motor controller Music/Auto Stroboflash Controller Stroboflash ON/OFF www.flash-butrym.pl 6