MetroJET microduct cabling icroduct cabling icroduct
Transkrypt
MetroJET microduct cabling icroduct cabling icroduct
Type: Issued: Modified: MetroJET MetroJET microduct microduct cabling airair-blowing system Metrojet MK-LX5 05/08/2016 08/08/2016 REV: 1 PB PB The information is believed to be correct at the time of issue. Fibrain reserves the right to change this specification without prior notice. This specification is not contractually valid unless specifically authorised by Fibrain. Buyer and/or user of this product has to make sure before using this product that it is suitable for the intended use. All questions of liability relating to this product are subject – in accordance with the prevailing – to the Terms of Sale of the selling Fibrain subsidiary. MetroJET MK-LX5 - Multi loose tube microcable (up to 60F) Outer sheath: HDPE Loose tubes (PBT) with optical fibres Filling compound Central strength member (FRP) Water swellable yarns on FRP Water swellable yarns on S-Z stranded cable core Ripcord *Schematic drawing, not to scale APPLICATION: DESIGN: Microduct cabling air-blowing system application Metro networks Flexible network design Distribution network HDPE, UV stabilized outer jacket with low coefficient of friction Loose tubes (and fillers), SZ stranded around the CSM Each PBT tube containing up to 12 optical fibres CABLE DESIGNS: Quantity [pcs] Variant 1-5T x 4F 1-5T x 6F 1-5T x 8F 1-5T x 10F 1-5T x 12F Fibres Fibres per tube Total elements Active tubes 4-20 6-30 8-40 10-50 12-60 4 6 8 10 12 5 5 5 5 5 1-5 1-5 1-5 1-5 1-5 Ø nominal (±5%) [mm] 5.2 5.2 5.2 5.2 5.2 Nominal weight (±10%) [kg/km] 21 21 21 22 22 APPLICATION: Temperature range Transport & Storage: Installation: Operation: - 40 to + 70°C - 15 to + 60°C - 30 to + 70°C Minimum Bending Radius Under maximum tension: Without tension: 20 x cable Ø 10 x cable Ø MAIN MECHANICAL AND ENVIRONMENTAL CHARACTERISTICS Test Test Standard Specified Value Max allowed tension Max operating tension IEC 60794–1-2-E1 IEC 60794–1–2-E1 500 N (εf≤ 0.33%) / 700 N (εf≤ 0.5%) 150 N Crush Impact IEC 60794–1–2-E3 IEC 60794–1–2-E4 1000 N / 100 mm, max. 5 min 10J, 3 impacts, R= 300 mm, 500mm Torsion Repeated bending Cable bend IEC 60794–1–2-E7 IEC 60794–1–2-E6 IEC 60794–1–2-E11 2m,50N, ± 180°, 15 cycles R=15x D, 45N, 15 cycles R=20x D, 10 turns, 3 cycles Temperature cycling IEC 60794–1–2-F1 -30°C to +70°C -40°C to +70°C Water penetration IEC 60794–1–2-F5B sample=3m, water column=1m, 24h Requirement ∆α reversible Δεf≤ 0.05%, ∆α ≤ 0.05 dB/km ∆α ≤ 0.05 dB, no damage ∆α ≤ 0.05 dB after the test ∆α ≤ 0.05 dB, no damage no damage ∆α ≤ 0.05 dB, no damage ∆α ≤ 0.05 dB/km ∆α ≤ 0.10 dB/km no water leakage (*) values for single-mode fibres, all optical measurements performed at @1550nm OPTICAL FIBRES AND LOOSE TUBES COLOUR IDENTIFICATION Fibres and tubes identification information see DSH_Colors_CODE_XXXX document. FIBRES PARAMETERS Optical fibres parameters see DSH_OFP document. Fibrain Sp. z o.o., ul. Wspólna 4a, 35-205 Rzeszów, Poland tel:+48 17 866 08 12; email:[email protected]; web: www.fibrain.com 1 MetroJET MetroJET microduct microduct cabling airair-blowing system Type: Issued: Modified: Metrojet MK-LX5 05/08/2016 08/08/2016 REV: 1 PB PB The information is believed to be correct at the time of issue. Fibrain reserves the right to change this specification without prior notice. This specification is not contractually valid unless specifically authorised by Fibrain. Buyer and/or user of this product has to make sure before using this product that it is suitable for the intended use. All questions of liability relating to this product are subject – in accordance with the prevailing – to the Terms of Sale of the selling Fibrain subsidiary. M ARKING The following print (white / ink jet) is applied at 1-meter intervals: • Supplier: FIBRAIN • Standard code (Product type, fibre type, fibre count) • Year of manufacture: xxxx • Length marking in meters • Cable ID / Drum No Example: METROJET MK-LX5 60F SM G652D 5T12F "YEAR OF MANUFACTURE" "LASER SYMBOL” “LENGTH MARKING" “BATCH NUMBER” The accuracy of marking is ±0,5%. Remarking is in accordance with Bellcore GR 20 and supersedes earlier markings. Occasional loss of marking is possible. Cables can be supplied with a range of single mode or multimode fibres and customized print. PACKING Cables will be shipped on disposable wooden or treated wooden drums. Both ends of the cable will be capped and accessible for testing. Identification information label will be placed on the drum. DELIVERY LENGTH 2000 – 8000 meters ± 5%, with possibility of supplying up to 5% of total contract quantity as short length cables which should be above 1000 meters long. Tolerance of 5 % of order quantity shall be allowed. Fibrain Sp. z o.o., ul. Wspólna 4a, 35-205 Rzeszów, Poland tel:+48 17 866 08 12; email:[email protected]; web: www.fibrain.com 2