Cennik 2016 - Leone Implantologia

I MPL ANTOLOGIA
Made of stainless steel. Seating tip is screwed in
Tips are made of medical grade 5 titanium. Screw
Supplied non-sterile, the tips must to be sterilised
Cennik 2016
2
2
cena brutto
cena brutto
Implanty *
Leone
Leone Max Stability
Leone Short 6.5
ruby zamykaj ce *
STANDARD ABUT
Made of medical
Pack
160
plnof 1
www.leone.it
580 pln
* u ywane w przypadkach subkrestalnego
osadzania implantów
czniki goj ce *
CYLINDER ABUT
new
LEONE 6.5 SHORT DENTAL IMPLANT WITH COVER CAP
* dostarczane z czapeczk zamykaj c
Made of medical grade 5 titanium. HRS surface, self-locking Morse taper connection and internal hexagon.
Mounted on a carrier, with an included biopolymer sealing cover cap, and packed in gamma-ray sterile glass vial. Cap removal from the inner holder and
placement into the implant requires instrument
Cat. 156-1003-00.
The cover
cap supplied with the implant is
it has the same internal conPack content: 1 implant and 1 cover cap green since
3,75 mm
nection as the standard 3.3 mm-diameter
LEONE implant.
Healing caps, transfers, and
abutments for the 3.3 mm connection with
green colour code are to be used.
3,75 mm
10 mm
110-3810-02
12 mm
110-3812-02
www.leone.it
Kaseta chirurgiczna *
Ø
5 mm
length
6,5 mm
110-5065-02
4,5 mm
4,5 mm
10 mm
110-4510-02
for implant
12 mm
110-4512-02
The cover cap supplied with the implant is yellow
it hassince
the same
internal connection as the standard 4,1 mm-diameter LEONE
. Thisimplant
ensures absolute stability and mechanical resistance: extremely important
issues in this particular case as the crown-implant ratio results to be increased. There is no need for special accessories: healing caps, transfers and
abutments for the 4.1 mm connection with yellow colour code are to be used.
WIDER FIELD
OFVISION
The cover cap supplied with the implant is
yellow since
it has the same internal connection as the standard 4,1 mm-diameter
LEONE implant.
Healing caps, transfers, and
abutments for the 4.1 mm connection with
yellow colour code are to be used.
for additional decrease of the implant’s length
g the insertion process
In comparison
case of implant
with poor
quality
LEONE
standard implants
thebone
height
of the implant
in
to placement
The thread
design and
the apex
le contact
allow good
anchorage,
even into
thread
is increased
by 125%,
theprofi
bone
surface
is comparable
the presence
density.
the
surface ofofanreduced
implantbone
4,1 mm
in diameter and 8 mm long.
HREADS
useful for implants
and instruments
to reduce
contamination risks
6
8 500 pln
with diameter up to 5 mm
* 3 wysoko
In case of implant placement into fresh extraction sockets
ease in thread height compared to cylindrical
geometry of the implant is ideal for the insertion in post-extraction
derable increase in primary stability The
as well
The
LEONE
6.5 short implant and the whole range of specific surgical
sockets.
ontact surface area compared to cylindrical
instruments are featuredFUCHSIA
by a
COLOUR-CODE
.
gth and connection size
In case of some advanced surgical interventions
The implant apex, featuring a conical profi le and incremental threads,
facilitates the insertion process by reducing the risk of fractures and
fenestrations.
STRUMENTS
SURGICAL
* cena zestawu
height
new
TITANIUM BASIN
the instruments are
organized in a horizontal
sense into special niches
reduced to 6.5 mm
Ø platform
160 pln
PLATFORMA
PLATFORMA
STANDARDOWA
DUŻA
INSTRUMENTS
MULTITECH ABUTMENT
ci przezdzi s owe, 2 rednice
Transfery wyciskowe
9
www.leone.it
120
Made of medical
grade 5
25° PRE-INCLINE
connection (angled abutm
Pack content: 1 abutment
8
Narz dzie do osadzania
CALIBRATED
HOLES
czników
for the control of drill
7
eel and medical grade 5 titanium.
er spring, it provides the right beating force to engage the healing cap andabutment
definitelyto
connect
the implant.
the Every
mounted on the abutment beater.
diameter
www.leone.it
new
ANALOGS
7
to beat the abutment for the
thedefinitive
implant. connection to
nts
are ready available
in the kit
for implant
platform
90 Øpln
PLATFORMA
PLATFORMA
STANDARDOWA
DUŻA
530 pln
www.leone.it
DEPTH INDICATORS
ANDPOSITIONER
Made of stainless steel. Designed to be used in the labo
height
for easy identification. Available in two versions:
standa
Pack content: 1 analog, 1 pin, 1 bar for the extraction124
o
za sztukę
medical grade 5 titanium. Supplied with an inner spring, it provides the right
age the
beating
healing
force
captoand
eng
ent to the implant. Every seating tip may be mounted on the abutment beater.
Dodatkowe ko cówki
nless steel.
ng and unscrewing the tips into the threaded handle.
www.leone.it
156-1008-07
TIP 156-1008-01
new
SMOOTH SURFACES
ANALOGS
OR COVER CAP
de 5 titanium.
ent and removal of the cover cap from the implant.
www.leone.it
fset
only cap
be used
theplatform
percussion
abutments
the selfn oftip
themay
healing
with for
slim
and of
forthe
removal
of theinlow
for the insertion
of aforce
safety
the beating
byleash.
30%.
Pipolereduces
of implants.
156-1003-00
Sterilise in the autoclave before use.
ANALOGS
ENTS
156-1008-02
STRAIGHT TIP
156-1008-01
WITHOUT UNDERCUTS
8
for implant
for rapid
cleaning
Made
of
stainless
steel.
Designed
to
be
used
in prosthetic
the laboratory on accessories
dental casts to faithfully duplicate
implant.
the
position
colour-c
120 pln
AWith
try-in
abuo
ne
without damage
w in two versions:
for easy identification. Available
standard and long (more retentive).
za sztukę
bonding
Analogi laboratoryjne
of the gloves
Pack content: 1 analog, 1 pin, 1 bar for the extraction of the abutment
portion
156-1008-06
eel.
g cap with either standard or large platforms
and the low self-locking cap.
ANALOGS
nsertion of a safety leash. Suitable forFLAT
all TIP
types of156-1008-06
implants. Supplied non
e autoclave before use.
Made of stainless steel. Designed to be used in the laboratory on dental casts to faithfully duplicate
implant.
the
With
position
colour-code
of the marking
STRAIGHT
121-3306-00
12
for easy identification. Available in two versions: standard and long (more retentive).
Pack content: 1 analog, 1 pin, 1nbar
for
the
extraction
of
the
abutment
e
w
Made of stainless steel.156-1006-00
to be used in the laboratory on dental casts to faithfully duplicate
implant.
the
With
position
colour-code
of the marking
Narz dzie
do usuwania Designed
czników
*
for easy identification. Available in two versions: standard and long (more retentive).
for implant
Pack
content:
1 analog,
1 pin, marks
1ne
bar for the extraction of the abutment
andle, they allow the execution
techniques.
of special
With surgical
depth
w
de 5 titanium. The ratchet is designed to be used with the tap to thread the
g a two-way instrument, it may be utilized whether to screw in or unscrew
ar revolution in 24 “releases”, this ratchet is a specific versatile device even
e a “reload” of the instrument is needed.
onnection with the tap, the implant carrier or with the specially provided
002-00.
of implants. Supplied non-sterile. Sterilise in the autoclave before use.
the instrument.
9
400 pln
e use.
0-33
new
CAPS
0-41
1-33
3,3 mm
length
length
9 mm
length
3,3 mm
9 mm
ne142-3309-00
w
Ø
3,3 mm
4,1 mm
9 mm
9 mm
1-41
50 pln
FREESPACE
to customize the kit
with additional
surgical instruments
3,3 mm
4,1 mm
9 mm
9 mm
142-3309-00
142-3309-00
142-4109-00
4,1 mm
4,8 mm
9 mm
9 mm
142-4109-00
142-4809-00
4,8 mm
9 mm
142-4809-00
4,8 mm
new
9 mm
ne142-3309-00
142-4809-00
wPe ny katalog dost 142-4109-00
pny jest na stronie internetowej:
REDUCED SIZES
for implant
10
Ø
www.leoneimplantologia.pl
length
156-1006-00
new
Ø
length
unlock the healing capStandard
with either
or
Large platforms and
h a hole for the insertion of a safety leash. Suitable for all types of
e. Sterilise in the autoclaveIf before
the hexagon
use. is worn out,
2-33
Ø
* osobno dla platformy standardowej i du ej
R HEALING CAPS
for implant
Ø
for implant
156-1014-00
nium. Designed for placement and removal of the cover cap from the
n of the healingSlim
capplatform
with
and for removal of the low
for the insertion of a safety leash. Suitable for all types of implants.
for implant
in the autoclave before use.
0-48
6 mm
prosthetic accessories
itanium.
Designed to be screwed onto the
ment beater. The flat tip is most suitable
for
www.leone.it
156-1008-02
ble for all the abutments and healingOFFSET
caps. TIP
1-48
prosthetic accessori
for implant
Ø
length
3,3 mm
4,1 mm
4,8 mm
13 mm
13 mm
142-3313-00
142-4113-00
142-4813-00
mm
4,1 mm
Pe ny cennik3,3dost
pny na yczenie
13 mm
only 3 cm thick
13 mm
for 13
implant
mm
4,8 mm
13 mm
141-0000-51
Sandblasted bonding portion for the anchorage
for implant
of the customized abutment to enhance
the bond
cena brutto
3,3 mm
4,1 mm
4,8 mm
Ø platform
3,3 cena
mm brutto 4,1 mm
retention
for implant
Ø platform
ing portion
for the ABUTMENTS
anchorage
STANDARD
height
czniki
abutment
to standardowe
enhance the* bond
mm
height
Prace 10
przykr
cane
utments areMade
seated
the implants
LEONE
through120-3310-33
the
120-4110-41
120-4810-48
ofinto
medical
grade
5connection.
titanium.
The abutments
are seated into
the implants
LEONE
connection.
through the
Pack of 1
Platform Switching
10 mm
10 mm
10 mm
10 mm
124-3303-01
124-4103-01
Leone 360° anatomical abutments
LEONE 360° ANATOMICAL ABUTMENTS
g
LEONE
360°anatomicalPLATFORMA
abutments have gotPLATFORMA
the ideal features to facilitate the prosthetic
procedure during STANDARDOWA
the customizing phase in DUŻA
the laboratory and the clinical procedures
afterwards.
25° PRE-INCLINED
ABUTMENTS
15°ABUTMENTS
PRE-INCLINED
ABUTMENTS
CYLINDER
ANGLED ABUTMENTS
15° PRE-INCLINED 25°
ABUTMENTS
Self-locking
300 pln Morse taper connection
The main innovation of this product,
protected by an international patent
, is the apical
and internal hexagon
hexagon separated from the rest of the abutment: the free positioning to 360° on the dental
castconnection
makes it easy to achieve parallelism while taking advantage of the anatomical form of
taperthe
abutments. Afterwards, through the activation of the self-locking conical connection, the
abutment will join the hexagon directed in the selected position which will drive the clinician
on in the positioning on the patient with the maximum precision
87..89).(pages
czniki
4,5
4,5
for implant
* prostefor
i sko
ne 15
oraz 25for implant
implant
LEONE
360°anatomical abutments are available either straight or angled at 15°or 25°
to meet all demands for the prosthetic rehabilitation.
transfery wyciskowe
4,5
for implant
analogi laboratoryjne
3,3 mm
4,1 mm
Ømm
platform
4,8 mm
Ø platformactivation
3,3 mm by exerting
4,1 mm 4,8 mm
4,8 mm
Øangled
platform
mm
A step on the
abutment allows the3,3
of the connection4,1
a force
10
new
cznikiheight
360
arranged coaxially to the implant axis. A special flat tip (Cat. 156-1008-06) may be joined to the multi- purpose handle or the aheight
butment beater thus aheight
ssuring a s10
tablemm
support.
10 mm10
mm
10 mm
10 mm
mm
Ø4,8
platform
Ø platform
3,3 mm
tuleje do prac przykr canych
10 mm10 mm
mm 10 mm
10
mm
height
124-3303-02
124-4103-02
124-3303-01
124-4103-01
124-4803-01124-4803-02
120-4810-48
120-4810-48
for implant
120-4110-41
MULTITECH120-3310-33
ABUTMENTS
15°
25°
10 mm10 mm
10 mm height
124-3303-01
Prace podparte na implantach
320 pln
150 pln
80 pln 4,1 mm
3,3 mm
4,1 mm
4,8 mm
290 pln
10 mm10 mm
125-3303-33
125-4103-41
124-4103-01
124-4803-01
Made of medical grade 5 titanium,
LEONE
through
connection
the (straight abu
360 they
pln are seated into the implants
eated intoconnection
thePRE-INCLINED
implants
through
connection
the (straightAlso
abutments)
through
LEONE
the360°
(angled
abutments).
availableor15°
angled
to
help achieve parallelism. The bond
25°LEONE
ANGLED
ABUTMENTS
25°
ABUTMENTS
25°
ANGLED
ABUTMENTS
A try-in abutment
in plastic
materialportion
isentirely
available of
associated
with each abutment
(page 28)
sandblasted.
15° angled
to
help
achieve
parallelism.
The
bonding
the
abutment
is herewith
Pack content: 1 abutment, 1 hexagon (for the angled abutments
only),indicated
2 burn-out
copings
angleddajabutments
only), 2plain
burn-out
copings
mo
liwo
dowolnego
optimal
inclination
and two oppositeosadzenia
faces to improve the position and
prosthetic accessories
12
the retention of the copings.
cznika
wokó osi pionowej
komplet elementów niezb dnych
do osadzenia protezy
zawiera:
czniki Multitech oraz Ti Base
abutments
show the
portion, the part with the higher aesthetical
forvestibular
implant
for implant
value, with a height lower than lingual.
4,8 mm
3,3 mm
Ø platform Ø platform
3,3 mm 4,1 mm
for implant
4,1 mm 4,8 mm
4,8 mm
3,3 mm
4,1 mm
Ø platform
cznik
hexagon
czników
10 mm
10 mm
height360 (tylko dla
k towych)
- 1 czapeczka z O-Ringiem
124-4803-02
125-3303-33
125-4103-41
125-4803-48
124-3303-02
124-4103-02
124-4803-02
125-3303-33
125-4103-41
EONE
360°special
are associated with this
innovative product.
300
pln
hey facilitate the choice of the most appropriate abutment in the laboratory thus avoiding the necessity
of
- 1 mikroczapeczka z O-Ringiem
oods storage and the possibilities of mistake.
are manufactured from a plastic material, autoclavable and may also be used to test
he
- 1 mikroczapeczka z insertem o redniej
e transmucousal portion on the patient.
twardo ci (pomara czowy)
to faithfully duplicate
implant.
the
With
position
colour-code
of the marking
fourheights for a precise adaptation to the thickness of the soft
10
mmof the platform
10 mm 10 mm
10 mm height
10 mm
height
has10 mm
ssues.The
height
switching
LEONE
of the
360°
anatomical
abutments10 mm
4,5
entive).
een reduced as much as possible for cases with low gingival thickness.
4,5
- 1 niski pier cie dystansowy
13
- 1 wysoki pier cie dystansowy
Scan Body i Scan
Post
for implant
forabutment
implant
for implant
- 1 wysoki
associated with each
herewith
indicated
(pagematerial
28)
A try-in
abutment
in plastic
is available associated with each abutment
herewithpier
indicated
28)
cie (page
dystansowy
sko ny
bonding
bonding
bonding
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
portion
portion
portion
pln
15° ANGLED
-4806-0012
121-3306-15 130
121-4106-15
121-4806-15
STRAIGHT
15° ANGLED
121-3306-00
121-4106-00
121-4806-00
for implant
4,8 mm
transmucosal Ø
3,3 mm
4,1 mm
4,8 mm
19w ci gu 48 godzin.
Wszystkie
9 mm zamówienia z o one do godziny 12:00 s dostarczane
gingival
6 mm
5 mm
6 mm
142-4809-00
height
Zamówienia mo na sk ada :
141-3313-51
141-4113-51
141-4813-51
telefonicznie: +48 91 851 17 18
mailem: [email protected]
w sklepie online:
www.sklep.leoneimplantologia.pl
lub u Przedstawicieli Medycznych
4,8 mm
320 pln
10 mm
4,5
125-4803-48
6 mm
121-3306-15
121
t is
I MP L A N TOL OG I A
Dystrybucja w Polsce:
Dental Business Solutions sp. z o.o.
ul. Welecka 38, 72-006 Szczecin-Mierzyn
tel. +48 91 851 17 18
email: [email protected]
www.leoneimplantologia.pl