Silentblocks for TCA

Silentblocks for TCA
1 Tighten all bolts and nuts according
to the manufacturer's instructions.
2 After replacing steering or suspension parts,
a wheel alignment must be executed.
3 Do not use a pneumatic wrench to tighten
the bolts and nuts.
Copyright Sidem
2014
INR_7_EN_A
4 The bolts and nuts that secure the silentblocks,
must always be tightened when the car is
placed on its wheels. Otherwise the silentblocks
are seriously stretched, and the rubber-metal
connection will fail.
5 Use proper tools (e.g. mounting tools of
our R10060 KIT) and clean the hole properly
when replacing Silentblocks in Track control
arms. Also apply appropriate glue in the hole
and on the silentblock (follow the
prescriptions of the glue f.i. loctite 603)
Copyright Sidem
2014
INR_7_EN_A