digital manometers mc series - Peltron
Transkrypt
digital manometers mc series - Peltron
TRADE AND PRODUCTION COMPANY E LE C TR O N I C M E A S U R E E Q U I P M E N T D E P AR TM E N T DIGITAL MANOMETERS MC SERIES APLICATION MC Series Manometers, are electronic transducers with digital display used to measure relative (gage) and absolute pressure of liquids, vapors and gases, both aggressive and chemical neutral. The ranges are from 0,1 to 1000 bar. Transducers of this kind are used instead of traditional manometers. FEATURES a). high durability and reliability b). high accuracy and stability c). small mass d). easy process connections CONSTRUCTION Digital manometers series MC are composed of two parts: a).measure head placed in stainless steel enclosure b).electronic part. The high quality piezoresistive silicone sensor in the measure-head is a measuring element with resistors arranged as Wheatstone bridge. The electronic part of MC series transducers consists of two chambers: the first with signal processing board and the second with a battery. Manometer has also a module which switches on and off the power supply. PRINCIPLE OF OPERATION Measured pressure acts trough separating diaphragm and silicone oil on sensor, which results in changing of the bridge’s resistance. Output voltage appears on bridge’s output with value proportional to measured pressure. Electronic board, besides supplying the Wheatstone bridge, converts this voltage to a signal, which value is shown on LCD display. TECHNICAL DATA Measure range * (bar) Overpressure 0 ÷ -0,2...-0,5; 0 ÷ 0,2.....0,5 2,5 bar 0 ÷ -1; 0 ÷ 1...300 3 x range 0 ÷ 600 2xrange 0 ÷ 1000 1200bar * - absolute and relative (gage) ranges Continuous development of our products makes necessity of introducing changes to theirs construction, which can be not pointed out in this document. Signalization of battery wear: Signalization of over-range: Signalization of negative polarization: Power supply: Measure time: Basic terror: Operating temperature: Medium temperature: Thermal compensation range: Temperature error within thermal compensation range: character „←” appear in the left up corner of display, only the first digit „1" lights, character „−” is showed, battery 9VDC 6LF22 (for abort 20000 measures) about 12 seconds, ≤ 0,5% of measure range (FSO), 0 ...+ 50°C, 0...+ 70°C; option −20...+ 70°C, 0... + 70°C; option –20...+70°C, zero ≤ 0,25% FSO /10°C, range ≤ 0,25% FSO /10°C, not concerned for ranges ≥1 bar; for <1 bar calibration is needed, 3,5 digits, LCD 8mm 1999, bar; others optional (on request), 850 g (it depends on pressure connection) IP54, male M20x1,5; G1/2”, G1/4” female - ½” or ¼”, Influence from changing in position: Kind of display: Maximal display range: Display units: Mass: Protection provided by enclosure: Pressure connection: Materials: - separating diaphragm - measure head enclosure - measure module enclosure 316Lss; 304ss or 316ss alloy Al DIMENSIONS 1.000 MPa POMIAR PRESSURE CONNECTIONS Continuous development of our products makes necessity of introducing changes to theirs construction, which can be not pointed out in this document. ORDERING WAY To order a product, following way is recommended: Pressure transducer: MC X - X - X - X - X MATERIAL of DIAPHRAGM MODEL S M H PRESSURE KIND relative absolute G A 316Lss Monel Hastelloy PRESSURE CONNECTION W N M PRESSURE RANGE in .St.B ½ ” ext. St.B ¼” ext. M20x1,5 by table (bar) UNITS B bar other (write in) Ordering example (standard): MC G - 5 - B - M – S; medium: water - temperature 0 ÷ 50°C; ambient temperature 0÷50°C. MC – digital manometer G – relative pressure: standard models include also version A 5 – pressure range 0 ÷ 5 bar: standard models include ranges –1...200 bar, B – unit - bar M – pressure connection with thread M20 x 1,5 S – diaphragm material 316Lss NOTICE 1. There is possible to make special manometers to other application fe: oxygen, chlorine , special pressure connection and so on. 2. While ordering, it is recommended to mention about kind and temperature of medium and also about ambient temperature like in the example above. TOWARZYSTWO ul. EZOPA 71 A PRODUKCYJNO HANDLOWE 04-805 WARSZAWA TEL. (022) 615-63-56, 615-25-70, 615-27-05 FAX. (022) 615 –70-78 Account PBK IX Oddz. Warszawa 11101040-37745-2700-1-64, Regon 006210833, http://www.peltron.home.pl e-mail: [email protected] NIP 113-00-18-140 Continuous development of our products makes necessity of introducing changes to theirs construction, which can be not pointed out in this document.