Processing of metals and their alloys into final products that meet

Transkrypt

WELCOMING ADDRESS
Processing of metals and their alloys into final products that meet customers’ expectations in terms of shape,
dimensions and final properties always includes various operations connected with the metal forming. It has
always been, and continuously is, an important industrial process used for many applications starting from
nanoparts used in electronic systems, through bioengineering applications, automotive and aerospace industry, to
massive components used in offshore or nuclear applications. Continuous development in metal forming
technologies e.g. hot stamping brings about new possibilities to obtain new yet better products with complex
shapes and enhanced properties tailored to specific often more and more demanding applications. Therefore,
metal forming attracts the interest of scientists, academics and researchers all around the world. This provides a
great motivation for organising the conference as a forum for discussion and dissemination of recent
developments, innovations and advances in this field of science and technology.
Metal Forming 2016 is the 16th in a series of International Conferences, organized since 1974 by AGH Univerity
of Science and Technology in Kraków, Poland. From 1994 to 2010 the Conference was organized biannually,
jointly with the University of Birmingham, UK. The latter was replaced by the University of Toyohashi in 2010,
when the Conference went, for the first time, to Japan. Metal Forming 2012 was organized in Kraków, Poland
by AGH University of Science and Technology, together with the University of Toyohashi and, for the first time,
by the University of Palermo, Italy, which had joined the Organization team, and hosted the Conference in
2014.The next Metal Forming conference will take place in Toyohashi, Japan in 2018.
There are 5 plenary lectures and 140 regular lectures in the Conference Programme, presented by authors from
universities, research institutes and industry from 27 countries around the world. The authors demonstrate the
results of a very wide spectrum of research topics, from micro- and nano- forming, to the numerical modelling
of processes and systems. The applications of the latest achievements in material characterisation techniques for
prediction of microstructure evolution and mechanical properties during or after thermomechanical processing
are also presented. Constitutive and numerical modelling as well as optimisation of processes and systems is the
topic of a significant part of contributions. Manuscripts cover a wide range of materials from metal powders,
titanium and magnesium alloys to advanced high strength steels and high alloys.
We would like to express our gratitude to the reviewers of the submitted papers, principally to the Members of
the Scientific and Steering Committees of the Conference, for their hard work and critical, but constructive
remarks, which were helpful in maintaining the high scientific level of the Conference. We hope that the presented
papers will become a source of valuable information and inspiration in the scientific work for academics,
researchers, engineers and students.
We are very pleased to welcome all Participants of the 16th Metal Forming Conference and we wish you a
pleasant and fruitful stay in Kraków. We hope that the Conference will become a source of valuable information
and inspiration in your scientific work.
On behalf of the Local Organizing Committee
Danuta Szeliga, Krzysztof Muszka
AGH University of Science and Technology, Kraków, Poland
ORGANIZING UNIVERSITIES:
AGH UNIVERSITY OF SCIENCE AND TECHNOLOGY, KRAKÓW, POLAND
UNIVERSITY OF PALERMO, ITALY
TOYOHASHI UNIVERSITY OF TECHNOLOGY, JAPAN
STEERING COMMITTEE
MACIEJ PIETRZYK
JAN KUSIAK
JANUSZ MAJTA
PETER HARTLEY
JIANGUO LIN
UNIVERSITY OF BIRMINGHAM, UK
IMPERIAL COLLEGE, LONDON, UK
INTERNATIONAL SCIENTIFIC COMMITTEE
YOHEI ABE
JULIAN M. ALLWOOD
DENIS JORGE BADIOLA
DOREL BANABIC
THIERRY BARRIERE
BERND-ARNO BEHRENS
PIOTR BREITKOPF
STEFANIA BRUSCI
BRUNO BUCHMAYR
JIAN CAO
ELLEN K. CERETTA
ELISABETTA CERETTI
JOSE CESAR DE SA
DIDIER CLAUDE FARRUGIA
LUIGINO FILICE
LANDER GALDOS
ZBIGNIEW GRONOSTAJSKI
ISABEL GUTIERREZ
ANNE MARIE HABRAKEN
KUNIO HAYAKAWA
GERHARD HIRT
PETER DAMIAN HODGSON
MARTIN JACKSON
RUDOLF KAWALLA
KAZUHIKO KITAMURA
ANDRZEJ KOCANDA
MICHAŁ KRZYŻANOWSKI
TAKASHI KUBOKI
JARI LARKIOLA
HUI LONG
JANUSZ ŁUKSZA
TOMOYOSHI MAENO
KEN-ICHI MANABE
RYO MATSUMOTO
KIYOTAKA MATSUURA
MARION MERKLEIN
WOJCIECH ZBIGNIEW MISIOŁEK
PIERRE MONTMITTONET
SEBASTIAN MRÓZ
MASAAKI OTSU
ZBIGNIEW PATER
UNIVERSITY OF CAMBRIDGE, UK
CEIT, SPAIN
TECHNICAL UNIVERSITY OF CLUJ-NAPOCA, ROMANIA
ENSMM, BESANÇON, FRANCE
LEIBNIZ UNIVERSITÄT HANNOVER, GERMANY
UNIVERSITÉ DE TECHNOLOGIE DE COMPIÈGNE, FRANCE
UNIVERSITY OF TRENTO, ITALY
UNIVERSITY OF LEOBEN, AUSTRIA
NORTHWESTERN UNIVERSITY, USA
LOS ALAMOS NATIONAL LABORATORY, USA
BRESCIA UNIVERSITY, USA
UNIVERSITY OF PORTO, PORTUGAL
CORUS RESEARCH, UK
UNIVERSITY OF CALABRIA, ITALY
UNIVERSITY OF MANDRAGORA, SPAIN
WROCŁAW UNIVERSITY OF TECHNOLOGY, POLAND
CENTRE OF STUDIES AND TECHNICAL RESEARCH, SPAIN
UNIVERSITY OF LIEGE, BELGIUM
SHIZUOKA UNIVERSITY, JAPAN
RWTH AACHEN, GERMANY
DEAKIN UNIVERSITY, AUSTRALIA
THE UNIVERSITY OF SHEFFIELD, UK
TU BERGAKADEMIE FREIBERG, GERMANY
NAGOYA INSTITUTE OF TECHNOLOGY, JAPAN
WARSAW UNIVERSITY OF TECHNOLOGY, POLAND
AGH UNIVERSITY OF SCIENCE AND TECHNOLOGY, POLAND
UNIVERSITY OF ELECTRO-COMMUNICATIONS, JAPAN
UNIVERSITY OF OULU, FINLAND
AGH UNIVERSITY OF SCIENCE AND TECHNOLOGY, POLAND
YOKOHAMA NATIONAL UNIVERSITY, JAPAN
TOKYO METROPOLITAN UNIVERSITY, JAPAN
OSAKA UNIVERSITY, JAPAN
HOKKAIDO UNIVERSITY, JAPAN
UNIVERSITY ERLANGEN-NUREMBERG, GERMANY
LEHIGH UNIVERSITY, USA
CEMEF - MINES PARISTECH, FRANCE
CZĘSTOCHOWA UNIVERSITY OF TECHNOLOGY, POLAND
UNIVERSITY OF FUKUI, JAPAN
LUBLIN UNIVERSITY OF TECHNOLOGY, POLAND
HENRYK PAUL
ELENA PERELOMA
PAVEL PETROV
IVO SCHINDLER
SIEGFRIED SCHMAUDER
CHRISTOF SOMMITSCH
A. ERMAN TEKKAYA
HIROSHI UTSUNOMIYA
A.H. VAN DEN BOOGAARD
BRADLEY WYNNE
MING YANG
INSTITUTE OF METALLURGY AND MATERIALS SCIENCE PAN, POLAND
UNIVERSITY OF WOLLONGONG, AUSTRALIA
BAUMAN MOSCOW STATE TECHNICAL UNIVERSITY, RUSSIA
TECHNICAL UNIVERSITY OF OSTRAVA, CZECH REPUBLIC
UNIVERSITY OF STUTTGART, GERMANY
GRAZ UNIVERSITY OF TECHNOLOGY, AUSTRIA
TECHNICAL UNIVERSITY OF DORTMUND, GERMANY
OSAKA UNIVERSITY, JAPAN
UNIVERSITY OF TWENTE, THE NETHERLANDS
TOKYO METROPOLITAN UNIVERSITY, JAPAN
CONFERENCE CHAIRS
DANUTA SZELIGA
KRZYSZTOF MUSZKA
LIVAN FRATINI
FABRIZIO MICARI
UNIVERSITY OF PALERMO, ITALY
KEN-ICHIRO MORI
LOCAL ORGANIZING COMMITTEE
CONFERENCE CHAIRS
DANUTA SZELIGA
KRZYSZTOF MUSZKA
CONFERENCE SECRETARY
ANNA SMYK
ORGANIZER
SPONSORS
GENERAL INFORMATION
1. Lectures Rooms are located in the B8 building (see the map below).
2. We kindly ask the Authors to upload the presentation files (in PowerPoint or pdf) prior the lectures. We suggest to do it on Sunday
at the Registration time or during the session breaks preceding the scheduled lecture.
3. Lunches and coffees will be served in the Lunch Room located near the Conference Centre.
4. The Conference Dinner will take place at the Museum of Municipal Engineering in Kraków, 15 św Wawrzyńca St.
MAP OF THE UNIVERSITY AREA
SUNDAY, SEPTEMBER 18, 2016
16:00 – 21:00 Registration
18:00 – 21:00 Reception
MONDAY, SEPTEMBER 19, 2016
08:00 – 14:00 Registration
08:30 – 09:00 Conference opening (Room A1+A2)
09:00 – 10:30 Plenary lectures (Room A1+A2)
10:30 – 11:00 Coffee break
11:00 – 13:00 Sessions
ROOM A1
ROOM A2
Modelling of Metal
Friction and Lubrication
Forming Technologies 1
13:00 – 14:20 Lunch
14:20 – 16:20 Sessions
ROOM A1
ROOM A2
Modelling of Metal
Numerical Analysis
and Modelling 1
16:40 – 18:40 Sessions
ROOM A1
ROOM A2
Modelling of Metal
Numerical Analysis
and Modelling 2
ROOM B
ROOM C
Powder Forming
Tube and Hydro Forming
ROOM B
Microstructure
and Properties 1
ROOM C
ROOM B
Microstructure
and Properties 2
ROOM C
TUESDAY, SEPTEMBER 20, 2016
09:00 – 10:30 Plenary lectures (Room A1+A2)
11:00 – 13:00 Sessions
ROOM A1
ROOM A2
ROOM B
Modelling of Metal
Numerical Analysis
Microstructure
and Modelling 3
and Properties 3
13:00 – 14:20 Lunch
14:20 – 16:20 Sessions
ROOM A1
ROOM A2
ROOM B
Modelling of Metal
16:40 – 18:40 Sessions
ROOM A1
Micro- and
Nano- Forming 1
19:30
Gala Dinner
Numerical Analysis
and Modelling 4
ROOM A2
Numerical Analysis
and Modelling 5
Sheet Forming 1
ROOM B
ROOM C
ROOM C
Modelling of Innovative
Hot Strip Rolling
Processes
ROOM C
Sheet Forming 2
WEDNESDAY, SEPTEMBER 21, 2016
08:30 – 09:15 Plenary lecture (Room A1+A2)
09:20 – 10:40 Sessions
ROOM A1
ROOM A2
ROOM B
Micro- and
Extrusion and Drawing 1
Formability 1
Nano- Forming 2
11:00 – 12:40 Sessions
ROOM A1
ROOM A2
ROOM B
Rolling
Extrusion and Drawing 2
Formability 1
12:45 – 13:00 Closing of the Conference (Room A1+A2)
13:00 – 14:30 Lunch
ROOM C
ROOM C
CONFERENCE PROGRAMME
SUNDAY, SEPTEMBER 18, 2016
16:00 – 21:00
18:00 – 21:00
Registration
Reception
08:00 – 14:00
08:30 – 09:00
09:00 – 10:30
Registration
Conference opening (Room A)
MONDAY, SEPTEMBER 19, 2016
09:00 – 09:45
09:45 – 10:30
10:30 – 11:00
11:00 – 13:00
11:00 – 11:20
PLENARY LECTURES (ROOM A1+A2)
CHAIR: Fabrizio Micari
Advanced Characterization for Quantifying and Modeling Deformation Due to Thermo-mechanical Processing in BCC metals
Ellen K. Cerreta
The role of simulation in the production of ultra large components
JesusTalamantes-Silva
Coffee break
MODELLING OF METAL FORMING
FRICTION AND LUBRICATION
POWDER FORMING
TECHNOLOGIES 1
(ROOM A1)
(ROOM A2)
(ROOM B)
CHAIR: Bradley Wynne
CHAIR: Michal Krzyżanowski
CHAIR: Kiyotaka Matsuura
Joining of Stepped Shaft and Disc
Evaluation of Tribological Performance An Investigation of Direct Powder
by Forming
of Lubricants and Nitrided Die for Hot
Forging of Nickel Superalloy FGH96
Forming of Steel Using Tapered-Plug
Kenji Hirota, Kazuhiko Kiamura,
Shuang Fang, Zhusheng Shi,
Penetration Test
Yoshihiko Ukai, Keiichi Matsunaga
Qian Bai, Jiaying Jiang,
Kazuhito Asai, Kazuhiko Kitamura
Shu Yun Wang, Jianguo Lin
11:20 – 11:40 Analysis of Material Flow in Oval
Upsetting Using Mild-Wedged Die
Takashi Nomura, Con Sinh Nguyen,
Kazuhiko Kitamura, Keiichi Matsunaga
Extended Conical Tube-Upsetting Test
to Investigate the Evolution of Friction
Conditions
Marco Teller, Alexej Klubakov,
Martin Franzke, Johannes Lohmar,
Gerhard Hirt
Exploitation of Field-Assisted Sintering
Technology (FAST) to Produce
Pre-Forged Billets from Metastable
Beta Titanium Alloy Powder
Emma Calvert, Bradley Wynne,
Martin Jackson
11:40 – 12:00 Connection Strength of Additive
Manufactured Tool Elements
to the Substrate
Daniel Junker, Aleksandr Fedorov,
Oliver Hentschel, Michael Schmidt,
Marion Merklein
Identification of Friction Coefficient
in Forging Processes by Means T-Shape
Tests in High Temperature
Ritanjali Sethy, Lander Galdos,
Joseba Mendiguren,
Eneko Sáenz de Argandoña
Methodology for Modelling Diffusion
Bonding in Powder Forging
Yi Wang, Idris K. Mohammed,
Daniel S. Balint
TUBE AND HYDRO FORMING
(ROOM C)
CHAIR: Livan Fratini
T-Shape Connector Hydroforming
Process Analysis
Marek Paćko, Janusz Krawczyk,
Pior Bała, Paweł Paćko,
Tomasz Śleboda, Krzysztof Muszka,
Marcin Hojny, Marek Wojtaszek,
Grzegorz Cios, Józef Burdzy,
Roman Wydra
Investigation about the Oil Pressure
Rate in the Warm Hydroforming
of an Al-Mg Alloy Component
Gianfranco Palumbo,
Antonio Piccininni,
Pasquale Guglielmi, Vito Piglionico,
Donato Sorgente, Luigi Tricarico
Production Technology for Precision
Seamless Steel Tubes from the
Perspective of Microhardness Changes
Milan Mojžiš, Martin Ridzoň,
Peter Bella, Maroš Martinkovič,
Ľudovit Parilák
12:00 – 12:20 Design of a Novel End-Effector
for Kinematic Support in Incremental
Sheet Forming
Jan Brüninghaus, Yan Volfson,
Jobst Bickendorf, Sigrid Brell-Cokcan
12:20 – 12:40 Determination of Processing Windows
for the Hot Stamping of AA7075
Qunli Zhang, Kang Ji, Omer El Fakir,
Xiaochuan Liu, Liliang Wang
12:40 – 13:00 Energy Efficient Servo Controlled Roll
Levelling Machines
Eneko Sáenz de Argandoña,
Elena Silvestre, Daniel Garcia,
Joseba Mendiguren, Lander Galdos
Investigation on Friction Conditions
during a Severe Bending Deformation
on a Thick Plate
Antonello D’Annibale,
Mohamad El Mehtedi,
Antonio Maria Di Ilio,
Filippo Gabrielli, Lorenzo Panaccio
Measurement of Coefficient of Friction
in Hot Stamping by Hot Deep Drawing
Test
Hironori Sasaki, Tomonori Mukai,
Akira Yanagida
Relationship between Molecular
Structures of Organic-Sulfur
Compounds and Metal Forming
Performance
Tomohiro Takaki, Shogo Ito,
Kazuhiko Kitamura,
Kazuhiro Yagishita, Junichi Shibata
13:00 – 14:20
Lunch
14:20 – 16:20 MODELLING OF METAL FORMING TECHNOLOGIES 2
(ROOM A2)
CHAIR: Eneko Sáenz de Argandoña
14:20 – 14:40 Improvement of Fatigue Strength of Hole Edge
of Ultra-High Strength Steel Sheet by Punching
Process Including Thickening
Yohei Abe, Ken-ichiro Mori, Ruota Kosaka
14:40 – 15:00 Influence of Burnishing Conditions on Burnishing
Force and Application of Coated Roller in Inclined
Roller Burnishing
Masato Okada, Takuma Hirokawa, Naoki Asakawa,
Masaaki Otsu
15:00 – 15:20 Influence of Cutting Processes on Edge Cracking
Sensitivity of Bright Finishing Alloys
Marion Merklein, Tobias Gnibl, Ioannis Tsoupis,
Martin Friedrichsen, Johannes Beck
15:20 – 15:40 Investigation of the Relationship between Material
Flow and Rollover in Double-Sided Shearing Using
Image Processing
Masahiro Sasada, Jun Tamura
Supercritical Debinding
of Environmentally Friendly Inconel
718 Feedstock to Metal Injection
Moulding Process
Alexandre Royer, Jean-Claude Gelin,
Thierry Barriere
Numerical and Experimental Study
on Sheet Hydroforming of 2A12
Aluminum Alloy
Chu Wang, Min Wan, Wennan Yuan
Unconventional Methods of Sintering
Inconel 718 MIM Samples
Olivier Dugauguez,
Jose Manuel Torralba,
Thierry Barrière, Jean-Claude Gelin
Exploitation of Spark Plasma Sintering
and Subsequent Deformation
for Producing Dissimilar Titanium
Alloy Components from Powder
Jacob Pope, Martin Jackson,
Bradley Wynne
Hydroforming of Thin Sheets of Light
Alloys
Monika Hyrcza-Michalska
Effect of Multistage Deformation
during the Pipe Processing
on Mechanical Properties of Steels
Strength Grade X70-X80
Grigory E. Khadeev, Dmitrii Ringinen,
Leonid Efron
NUMERICAL ANALYSIS AND MODELLING 1
(ROOM A2)
CHAIR: Mikhail A. Petrov
Feasibility Study of Complex Sheet Hydroforming
Process Experimental and Modelling
Mohamed Mohamed, David Carty, John Storr,
Nicola Zuelli, Paul Blackwell, David Savings
Prediction of Forming Limit Diagram for AA5754
Using Artificial Neural Network Modelling
Mohamed Mohamed, Sherif Elatriby, Zhusheng Shi,
Jianguo Lin
MICROSTRUCTURE AND PROPERTIES 1
(ROOM B)
CHAIR: Edmilson Otoni Corrêa
A Method of Determining Unified Viscoplastic
Constitutive Equations for Hot Forging Simulations
Nicholas J. Politis, Denis Politis, Catrin Davies,
Jianguo Lin
Deep Drawability and Bendability in Hot Stamping
of Ultra-High Strength Steel Parts
Ken-ichiro Mori, Tomoyoshi Maeno, YuzoYanagita
A New Approach for Void Closure in Bulk Metal
Forming
Kai Kittner, Janine Wiesner, Rudolf Kawalla
Effect of Different Quench Media
on the Microstructure and Mechanical Properties
of Large-Scale Low Alloy Steel Forgings
Edgar Saldana, Bradley Wynne, Rene Cerda-Rojas,
Rafael David Mercado-Solis
Influence of Process Parameters on the Product
Integrity in Friction Stir Extrusion of Magnesium
Alloys
Dario Baffari, Gianluca Buffa, Livan Fratini
A New Method Predicting Contact Length
and Flattening in Temper Rolling
Joonas Ilmola, Aarne Pohjonen, Jari Larkiola,
Jari Nylander
15:40 – 16:00 Fabrication of Cu-C Composite containing
Unidirectionally Oriented Graphite Fibers Using Hot
Extrusion Process
Kiyotaka Matsuura, Hiroto Kontani,
Toko Tokunaga, Munekazu Ohno
16:00 – 16:20 Superplastic and anisotropic behaviors of Al-coated
Mg alloy sheet
Toko Tokunaga, Kiyotaka Matsuura,
Munekazu Ohno
16:20 – 16:40
Coffee break
16:40 – 18:40 MODELLING OF METAL FORMING TECHNOLOGIES 3
(ROOM A1)
CHAIR: Łukasz Rauch
16:40 – 17:00 Optimized Cooling Strategies for Bainitic Forging
Steels
Gernot Eggbauer, Bruno Buchmayr
17:00 – 17:20 Prediction of Failure Mode in Hole Clinching
of Al Alloy and Advanced High-Strength Steel
Guo Shen, Chan Juo Lee, Jeong-Min Lee,
Gil-Seok Kang, Joon Hong Park, Byung-Min Kim,
Dae-Cheol Ko
17:20 – 17:40 Prevention of Local Thinning and Springback in Hot
Stamping of Thin Sheets
Yuki Nakagawa, Ken-ichiro Mori,
Tomoyoshi Maeno
17:40 – 18:00 Process Effects in Short Cycle Stretch Forming
of Tinplate Can Bodies
Matthias Schneider, Mathias Liewald
18:00 – 18:20 Production of Aluminium Based Interpenetrating
Phase Composites Using Semi-Solid Forming
Christoph Seyboldt, Mathias Liewald, Daniel Heydt
18:20 – 18:40 The Effectiveness of Cold Rolling for Residual Stress
Reduction in Quenched 7050 Aluminium Alloy
Forgings
Ran Pan, Catrin Mair Davies, Wei Zhang,
Zhusheng Shi, ThiloPirling, Jianguo Lin
An Analytical and Numerical Investigation on Flange
Wrinkling Behavior in Warm Forming Process
of AA5754 Using Macro-textured Tool Design
Kailun Zheng, Lei Zhu, Denis Politis, Jianguo Lin,
Trevor Dean
Numerical Analysis of Data Transfer Quality
in the 3D Multi-scale Uncoupled Concurrent Model
connected with DMR
Joanna Szyndler, Konrad Perzyński, Łukasz Madej
Microstructure and Mechanical Properties
of Ti/Cu Clads Manufactured by Explosive Bonding
at Different Stand-off Distances
Wojciech Skuza, Henryk Paul, Katarzyna Berent,
Dariusz Prażmowski, Piotr Bobrowski
(ROOM A2)
CHAIR: Thierry Barrière
Computer Simulation of the Combined Process
"Helical Rolling-Pressing"
Abdrakhman Naizabekov, Sergey Lezhnev,
Alexandr Arbuz, Evgeniy Panin
Computer Simulation of Transformation during TRIP
Steel Rod Drawing
Dmitriy Constantinov, Krzysztof Bzowski,
Aleksey Korchunov, Maciej Pietrzyk, Roman Kuziak
(ROOM B)
CHAIR: Elena Pereloma
Investigation of Uniaxial Tensile Properties
of AA6082 under HFQ® Conditions
Nan Li, Zhutao Shao, Jianguo Lin, Trevor Dean
Constitutive Equation Development to Model the Hot
Forging of ZERON®100 Super Duplex Stainless Steel
and Associated Microstructural Evolution
Jamie Pennington, Bradley Wynne, Glenn Byrne
Hot Deformation and Microstructural Characteristics
of Nitrogen Enhanced 316L Stainless Steel
Santosh Kumar, B. Aashranth, Dipti Samantaray,
Marimuthu Arvinth Davinci, Utpal Borah,
A. K. Bhaduri
Investigation of Tensile and Compressive Creep
Behaviour of AA2050-T34 during Creep Age Forming
Process
Yong Li, Z. Shi, Y-L. Yang, Jianguo Lin
Crack Formation and Propagation Mechanism
in the Punching Process of High Tensile Strength Steel
Sheet
Takehiro Okano, Kota Sakumoto,
Kazuhiko Yamazaki, Shunsuke Toyoda,
Shinsuke Suzuki
Development of a Process Map for Wire Drawing
of Pearlitic Steel by Finite Element Analysis Coupled
with Damage Evolution
Yong Shin Lee
A Comparison of Input Data Used to Represent Phase
Transformations during the Quenching of a Large
Nuclear Forging
Michael Howson, Bradley Wynne, Peter Davies,
Sinan Al.-Bermani, Jesus Talamantes-Silva
Microstructural Evolution of the Magnesium Alloy
AZ31 with and without SiC Particles during
Ultrasonic Melt Treatment
Kristina Neh, Madlen Ullmann, Rudolf Kawalla
Investigation of the Unloading Yield Effect
in Aluminum and Magnesium Sheet Metal Alloys
at Room Temperature
Julia Degner, Sebastian Suttner, Marion Merklein
TUESDAY, SEPTEMBER 20, 2016
09:00 – 10:30
09:00 – 09:45
09:45 – 10:30
10:30 – 11:00
11:00 – 13:00
11:00 – 11:20
11:20 – 11:40
11:40 – 12:00
12:00 – 12:20
12:20 – 12:40
12:40 – 13:00
13:00 – 14:20
PLENARY LECTURES (ROOM A1+A2)
CHAIR: Janguo Lin
Excellent Formability of Light Metals Sheets by Friction Stir Incremental Forming
Masaaki Otsu
Effect of Processing Parameters on Microstructure and Mechanical Properties of Multiphase Steels Produced by Laboratory Simulated Strip Casting
Elena Pereloma
Coffee break
MODELLING OF METAL FORMINGTECHNOLOGIES 4
(ROOM A1)
(ROOM A2)
(ROOM B)
CHAIR: Ken-ichi Manabe
CHAIR: Piotr Breitkopf
CHAIR: Henryk Paul
Ultrasonic Wave Propagation Analysis for In-Process
Development of the Technology of Various Large
Modelling Microstructure Evolution in ATI 718Plus®
Monitoring of Stamping
Bodies Manufacturing Based on Combined Methods
Alloy
of Deformation
Naoto Hagino, Seiji Komiya, Junichi Endou,
Aleksey Reshetov, Olga Bylya, Michal Gzyl,
Masao Ishihama
Alexander Pesin, Ernest Drigun, Denis Pustovoytov, Malgorzata Rosochowska, Paul Blackwell
Ilya Pesin
Ultrasonic-Assisted Metal Staking with 15 kHz
Elastic-Plastic Thermomechanical Fatigue Analysis
Modelling of Flow Behaviour of Magnesium Alloys
Oscillation Frequency
of Forging Dies
Carlo Bruni
Uwe Leicht, Marion Merklein, Sebastian Engler
Andrey Vlasov, Nikolay Biba, Sergei Stebunov
Ultrasonic-Assisted Upsetting of Steel with 15 kHz
Extension of the Freiberger Model of Spread
The Onset of the Austenite to Bainite Phase
Oscillation Frequency
for the Calculation of Material Flow during Rolling
Transformation for Different Cooling Paths and Steel
of Long Products to a New Material Group of Mg
Compositions
Markus Michalski, Marion Merklein
Alloys AZ31, AZ81, WE43
Aarne Pohjonen, Mahesh Somani, Juha Pyykkönen,
Pavel Adamyanets
Joni Paananen, David Porter
Towards Processing of Multilayered Metallic
Finite Element Simulation of Heat Transfer during
Digital Image Correlation (DIC) System
Materials – Constrained Compression Testing
Cryogenic Asymmetric Sheet Rolling of Aluminum
as a Verification Tool for Constitutive Models
Alloys
of Deformation with Complex Strain Path Changes
Szymon Bajda, Michał Krzyżanowski,
Marcin Kwiecień, Janusz Majta, Łukasz Lisiecki,
Alexander Pesin, Denis Pustovoytov
Paulina Graca, Krzysztof Muszka, Janusz Majta,
Jakub Sroka
Konrad Perzyński, David Asquith
The Method of Production of Thin-walled Castings
Finite Element Simulation of Shear Strain during
Examination of the Effect of Variation in Stress
made of GX2CrNiMoN25-6-3 Cast Steel
High-Ratio Differential Speed Rolling of Aluminum
Magnitude on the Amount of Transformed Retained
Alloy 5083
Austenite in the Structure of TRIP Steel Wires
Maciej Nadolski, Grzegorz Stradomski,
Andrzej Zyska
Alexander Pesin, Denis Pustovoytov
Marek Siemiński, Sylwia Wiewiórowska,
Zbigniew Muskalski
Advanced Solutions for Virtual Process Modelling:
Influence of Die Geometry on Drawing Force in Cold
Numerical Model of Dynamic Recrystallization Based
Application to Steel Ingot Manufacturing from
Drawing of Steel Tubes Using Numerical Simulation
on the RCAFE Approach
Casting to Open-die Forging
Peter Bella, Pavol Buček, Martin Ridzoň,
Adam Legwand, Mateusz Sitko, Konrad Perzyński,
Olivier Jaouen, Frédéric Costes, Ali Saad,
Milan Mojžiš, Ľudovit Parilák
Łukasz Madej
Patrice Lasne, Richard Ducloux
Lunch
14:20 – 16:20
14:20 – 14:40
14:40 – 15:00
15:00 – 15:20
15:20 – 15:40
MODELLING OF METAL FORMING
TECHNOLOGIES 5
(ROOM A1)
CHAIR: Jari Larkiola
Modelling of Transient Temperature
Field and Phase Transformation
Change: a Way for Residual Stress
Management in Large Size Forgings
Jakub Sroka, Jesus Talamantes-Silva,
Michał Krzyżanowski,
William Mark Rainforth
Interpretation of a Physical Simulation
of Hot Strip Rolling Schedules in Terms
of Inhomogeneity of Strain
and Temperature Fields
and Microstructure Development
Grzegorz Smyk, Piotr Macioł,
Danuta Szeliga
Thickness and Microstructure Analysis
on Hot Gas Bulged Cup-Shaped Parts
of Ti-22Al-24.5Nb-0.5Mo
Yong Wu, Gang Liu, Zhiqiang Liu,
Beibei Kong
Process Control Path for High Accurate
T-shape Hydroforming of Tube
Ken-ichi Manabe,
Tomomasa Nakamori, Kazuo Tada
15:40 – 16:00 Development of Computationally
Efficient Cellular Automata Static
Recrystallization Model
Mateusz Sitko, Łukasz Madej,
Jiangting Wang, Qi Chao, Krzysztof
Muszka
16:00 – 16:20 Influence of Hot Rolling Parameters
on Properties of Rails After Heat
Treatment
Monika Pernach, Andrij Milenin,
Danuta Szeliga, Maciej Pietrzyk
16:20 – 16:40
Coffee break
NUMERICAL ANALYSIS AND
MODELLING 4
(ROOM A2)
CHAIR: Tomoyoshi Maeno
Influence of Material and Tribological
Modelling on the Prediction of Big Size
Automotive Components Springback
Imanol Gil, Endika Mugarra,
Julen Aguirre, Joseba Mendiguren,
Eneko Sáenz de Argandoña,
Lander Galdos
Investigation into the Numerical Model
Behaviour of Belleville Washers
in CcoldRoll Forming
Kwun Sing Tsang, Wiliam Ion,
Martin English
SHEET FORMING 1
(ROOM B)
CHAIR: Jan Kusiak
Reducing Blanking Vibration
with Active Vibration Control Using
a Servo Press
Tomohiro Murakami, Ming Yang,
Hiroshi Kishi, Sigeki Mori,
Masahiro Ohkawa, Eiichi Fujino
MODELLING OF INNOVATIVE HOT
STRIP ROLLING PROCESSES
(ROOM C)
CHAIR: Maciej Pietrzyk
Web based Computer System
for Flexible Design of Hot Rolling
Processes
Krzysztof Bzowski, Łukasz Rauch,
Maciej Pietrzyk
Deep Drawing of One-sided, Stiffness
increasing Sheet Metal Composites
Dennis Hofmann, Mathias Liewald
Data Farming Computing for Rolling
Mill Simulations
Jacek Kitowski, Renata Słota,
Dariusz Krol, Jakub Liput
Elaboration of Ductile Fracture Criteria
Based
on Punching Forgeability Test
Łukasz Lisiecki, Piotr Skubisz
Effect of Plastic Deformation on Elastic
and Plastic Recovery in CP-Titanium
Saber Khayatzadeh, Salah Rahimi,
Paul Blackwell
Numerical Investigation of the Material
Behaviour during Compression Tests
for Samples with Rough Surfaces
Represented in Different Geometry
Scale Factors
Mikhail A. Petrov,
Alexander N. Petrov, Pavel A. Petrov
Numerical Modelling of AlSi7 Tubular
Components Flowformed at Elevated
Temperature
Michele Novella, Andrea Ghiotti,
Stefania Bruschi, Riccardo Capuzzo
Fabrication of Deep Cup with Flange
by In-Plane Stretch Forming Applying
Compressive Force in Thickness
Direction
Shohei Kajikawa, Takashi Iizuka,
Takashi Kuboki
Metallurgical Models
for Process/Product Hot Rolling
Applications
Ronan Jacolot, Astrid Perlade,
Huin Didier
Effect of the Time between Last
Deformation Pass and Accelerated
Cooling on the Mechanical Properties
in Nb and Nb-Mo Microalloyed Steels
Gorka Larzabal, Nerea Isasti,
Jose M. Rodriguez-Ibabe,
Isabel Gutiérrez, Pello Uranga
The Effect of Titanium Microalloying
in Bainitic Steels
Roman Kuziak
Parameters Design of Discontinuous
Dot Indenter in Fine Blanking Process
with Different Thickness Workpiece
Fei Zhou, Huajie Mao, Yanxiong Liu,
Lin Hua
Forming Limit of Titanium Alloy Sheet
Using Single-Point Incremental
Forming Technique with Varying Tool
Paths
Cho Pei Jiang, Tsung-Han Huang,
Fedor Grechnikov, Iaroslav Erisov
Friction Stir Welding of Copper Alloy
CuETP Thickness 5 mm
Nikola Sibalic, Milan Vukcevic,
Mileta Janjic
Material Knowledge Management and
Modelling for Hot Strip Rolling
Uwe Diekmann, Alex Miron,
Andreea Trasca, Marcus Neuer,
Volker Diegelmann
16:40 – 18:40
MICRO- AND NANO- FORMING 1
(ROOM A1)
CHAIR: Ellen K. Cerreta
16:40 – 17:00 Effect of Microstructure and Mechanical Properties
Formation of Medium Carbon Steel Wire through
Continuous Combined Deformation
Marina Polyakova, Irene Calliari, Alexander Gulin
17:00 – 17:20 Influence of Servo Motion on Forming Limit of Thin
Metallic Foils Using Micro Bulge Test
Ryo Yamaguchi, Tetsuhide Shimizu, Ming Yang
17:20 – 17:40 Influence of Strain Gradient on Springback of Thin
Pure Titanium Foils in Microbending Assisted
by Resistance Heating
Qui Zheng, Tetsuhide Shimizu, Ming Yang
(ROOM A2)
CHAIR: Pello Uranga
Identification of Phase Transformation Models
for Steels by Using Nature Inspired Optimization
Algorithms
Daniel Bachniak, Łukasz Rauch, Maciej Pietrzyk,
Jan Kusiak
Prediction of Localized Necking Based on Crystal
Plasticity: Comparison of Bifurcation
and Imperfection Approaches
Holanyo K. Akpama, Mohamed Ben Bettaieb,
Farid Abed-Meraim
Modelling Central Consolidation during Hot Rolling
of Cast Products
Didier Farrugia
17:40 – 18:00 Metallic Multilayered Materials Produced
by Constrained Compression
Marcin Kwiecień, Łukasz Lisiecki, Szymon Bajda,
Janusz Majta, Michał Krzyżanowski
Analysis of Void Closure during Open Die Forging
Process of Large Size Steel Ingots
Nathan Harris, Davood Shahriari,
Mohammad Jahazi
18:00 – 18:20 Microstructure and Mechanical Properties
of WC-Ni-Mo2C Cemented Carbide Developed
by Powder Metallurgy
Nádia Alves Nery Balbino, Edmilson Otoni Corrêa,
Líviode Carvalho Valeriano, Júlio Navarro Santos
Identification of Material Parameters Using
Indentation Test andManifold Learning Approach
L. Meng , Piotr Breitkopf, B. Raghavan,
G.Mauvoisin, O. Bartier, X. Hernot
18:20 – 18:40
Optimization by Shape Manifold Based on Level Set
Interpolation Applied to Deep Drawing Applications
Guénhaël Le Quilliec, Balaji Raghavan,
Piotr Breitkopf
19:30
Gala Dinner
SHEET FORMING 2
(ROOM B)
CHAIR: Monika Hyrcza-Michalska
Hot Stamping of Titanium Alloy Sheets into U Shape
with Concave Bottom and Joggle Using Resistance
Heating
Tomoyoshi Maeno, Yuya Yamashita,
Ken-ichiro Mori
Influence of Geometrical Shapes and Sheet
Thicknesses on the Dimensional Accuracy of Single
and Assembled Parts
Tobias Konrad, Steffen Schöllhammer, Karl Roll,
Marion Merklein
Stability of a Suppression Method of Dent
and Spring-Back in Zigzag Bending of Sheet
Metal/Plate
Takashi Kuboki, Takuma Yamada, Shohei Kajikawa,
Hiroyuki Abe
Studies on the Hot Forming and Cold-Die Quenching
of AA6082 Tailor Welded Blanks
Jun Liu, Ailing Wang, Haoxiang Gao,
Omer E. Fakir, Xi Luan, Li-Liang Wang,
Jainguo Lin
The Influence of Strain Rate and Strain
on the Behavior of Stress Relaxation
in 980 MPa-Grade Dual Phase Steel Sheets
Kodai Murasawa, Hayato Komine, Yoshie Otake,
Hideyuki Sunaga, Masato Takamura,
Yoshimasa Ikeda, Shinsuke Suzuki
A Fast Three-Dimensional Model for Strip Rolling
Christian Overhagen, Paul Josef Mauk
WEDNESDAY, SEPTEMBER 21, 2016
08:30 – 09:15
PLENARY LECTURE (ROOM A1+A2)
CHAIR:Ken-ichiro Mori
08:30 – 09:15 Forgings for Critical Applications; Past, Present and Future
Lee Shaw
09:20 – 10:40
MICRO- AND NANO- FORMING 2
(ROOM A1)
CHAIR: Masaaki Otsu
09:20 – 09:40 Multi-Resolution Material Hardening Law for CPFE
Micro-Forming Analysis
Ji Ling Feng, Shiwen Wang, Jianguo Lin
09:40 – 10:00 Shear Banding in Polycrystalline Aluminium
and Copper Pre-Deformed by ECAP and Subsequently
Plane Strain Compressed
Henryk Paul, Magdalena M. Miszczyk
EXTRUSION AND DRAWING 1
(ROOM A2)
CHAIR: Tomasz Śleboda
Benefits of Using Diamond Dies for Cold Alternate
Drawing of Magnesium Alloys
Vladimir Hristov, Kazunari Yoshida
Ductility Improvement of High Carbon Steel Wire
by Alternate Wire Drawing
Hidetoshi Nagashima, Kazunari Yoshida
10:00 – 10:20 Novel Fabrication Method of Metal Microtube Laser
Dieless Torsion Drawing Process
Tsuyoshi Furushima
Improvement of Ductility with Maintaining Strength
of Drawn High Carbon Steel Wire
Shiori Gondo, Shinsuke Suzuki, Motoo Asakawa,
Kosuke Takemoto, Kenichi Tashima,
Satoshi Kajino
Physical and Numerical Modeling of Manufacturing
Magnesium Alloy Tubes by Dieless Drawing Process
Andrij Milenin, Piotr Kustra, Dorota Byrska-Wójcik,
Tsuyoshi Furushima
10:20 – 10:40 The Scale Effect in the Design of Micro-dies
for Microforming
Wojciech Presz
10:40 – 11:00
11:00 – 12:40
FORMABILITY 1
(ROOM B)
CHAIR: Janusz Majta
Evaluation of Press Formability of Pure Titanium
Sheets
Quoc-Tuan Pham, Young-Suk Kim
Formability and Surface Quality of Incrementally
Formed Grade 1 Titanium Thin Sheets
Antonio Formisano, Luca Boccarusso,
Luigi Carrino, Massimo Durante, Antonio Langella,
Fabrizio Memola Capece Minutolo,
Antonio Squillace
Formability of AA6082-T6 at Warm and Hot
Stamping Conditions
Xi Luan, Omer El Fakir, Haoxiang Gao, Jun Liu,
Liliang Wang
Formability of Explosive Welded Mg/Al Bimetallic
Bar
Sebastian Mróz, Piotr Szota, Teresa Bajor,
Andrzej Stefanik
Coffee break
ROLLING
(ROOM A1)
CHAIR: Didier Farrugia
11:00 – 11:20 Optimization of Reversal Hot Plate Rolling
Technology of the Microalloyed Austenite
Krzysztof Muszka, Mateusz Sitko,
Matthias Schmidtchen, Grzegorz Korpała,
Katja Pranke, Eric Palmiere, Łukasz Madej
11:20 – 11:40 A Review of Microstructure and Microtexture
of Tertiary Oxide Scale in a Hot Strip Mill
Xiang Long Yu, Zheng Yi Jiang, Jing Wei Zhao,
Dong Bin Wei, Ji Zhou
EXTRUSION AND DRAWING 2
(ROOM A2)
CHAIR: Sebastian Mróz
Manufacture of Magnesium Tubes with Gradient
Hardness Distribution Using a Two-Stage Porthole
Extrusion Die
Yeong Maw Hwang, Yu Chen, Sergei Alexandrov
FORMABILITY 2
(ROOM B)
CHAIR: Yohei Abe
Investigation on Hardening and Softening Behavior
of Steel after Rapid Strain Rate Changes
Jens Dierdorf, Johannes Lohmar, Gerhard Hirt
Numerical Optimization and Practical Implementation
of the Tube Extrusion Process of Mg Alloys
with Micromechanical Analysis of the Final Product
Andrij Milenin, Piotr Kustra, Dorota Byrska-Wójcik,
Bartłomiej Płonka, Veronika Petráňová,
Vladimir Hrbek, Jiří Němeček
Investigation on the Mechanical Properties
and Formability of Ti3Al2.5V Tubes Deformed
at Elevated Temperatures
Enrico Simonetto, Giulia Venturato,
Stefania Bruschi, Andrea Ghiotti
11:40 – 12:00 Influence of the Deformation Method
on the Microstructure Changesin AZ31 Magnesium
Alloy Round Rods Obtained by the Rolling Process
Andrzej Stefanik, Piotr Szota, Sebastian Mróz,
Teresa Bajor, Sonia Boczkal
Study on Wire Rod Drawing Process Using
the Rotating Die
Gow Yi Tzou, Dyi-Cheng Chen, Shih-Hsien Lin
12:00 – 12:20 Numerical Analysis of a Skew Rolling Process
for Producing Axle Shafts
Zbigniew Pater, Janusz Tomczak, Tomasz Bulzak
12:20 – 12:40
The Effect of Equivalent Strain on Punch Load
for Cold Backward Extrusion of Copper Cans
Tomasz Miłek
The High Speed Wire Drawing Process of Steel Wires
under Fluid Frictions Conditions
Maciej Suliga
12:45 – 13:00
13:00 – 14:30
Closing of the Conference (Room A1+A2)
Lunch
The Influence of the Punch Shape and the Cutting
Method on the Limit Strain in the Hole Expansion
Test
Jakub Krawczyk, Zbigniew Gronostajski,
Sławomir Polak, Karol Jaśkiewicz,
Władysław Chorzępa, Ireneusz Pęcak
LIST OF PARTICIPANTS
Abe, Yohei
Toyohashi University of Technology
Japan
[email protected]
Bylya, Olga
University of Strathclyde
UK
[email protected]
Abed-Meraim, Farid
LEM3, DAMAS
France
[email protected]
Bzowski, Krzysztof
AGH University of Science and Technology
Poland
[email protected]
Adamyanets, Pavel
TU Bergakademie Freiberg
Germany
[email protected]
Calvert, Emma
University of Sheffield
UK
[email protected]
Asai, Kazuhito
Toyota
Japan
[email protected]
Cerreta, Ellen
Los Alamos National Laboratory
USA
[email protected]
Bachniak, Daniel
Poland
[email protected]
Cyganek, Zdzisław
KC96 ltd - TRANSVALOR SA
Poland / France
[email protected]
Bajda, Szymon
Poland
[email protected]
Degner, Julia
FAU
Germany
[email protected]
Barriere, Thierry
Femto-ST Institute
France
[email protected]
Diegelmann, Volker
VDEh-Betriebsforschungsinstitut BFI GmbH
Germany
[email protected]
Beck, Johannes
FAU
Germany
[email protected]
Dierdorf, Jens
RWTH Aachen University
Germany
[email protected]
Bella, Peter
ZP VVC s.r.o.
Slovakia
[email protected]
Ducloux, Richard
TRANSVALOR SA
France
[email protected]
Błoniarz, Remigiusz
Poland
[email protected]
Eggbauer, Germot
Montanuniversitaet Leoben
Austria
[email protected]
Breitkopf, Piotr
Université de Technologie de Compigne
France
[email protected]
Farrugia, Didier
Tata RD&T
UK
[email protected]
Bruni, Carlo
Universita Politecnica delle Marche
Italy
[email protected]
Feng, Jiling
Manchester Metropolitan University
UK
[email protected]
Bruninghaus, Jan
Germany
[email protected]
Formisano, Antonio
University of Naples Federico II
Italy
[email protected]
Bulzak, Tomasz
Lublin Univesity of Technology
Poland
[email protected]
Fratini, Livan
University of Palermo
Italy
[email protected]
Freund, Jonas
Bosch Transmission Technology B.V.
Netherlands
[email protected]
Hwang, Yeong-Maw
National Sun Yat-Sen University
Taiwan
[email protected]
Furushima, Tsuyoshi
Tokyo Metropolitan University
Japan
[email protected]
Hyrcza-Michalska, Monika
Silesian University of Technology
Poland
[email protected]
Gharbi, Mohammad
Director Technology and Process Development
Germany
[email protected]
Ilmola, Joonas
University of Oulu
Finland
[email protected]
Gil, Imanol
Mondragon University
Spain
[email protected]
Jacolot, Ronan
AMMR
France
[email protected]
Gondo, Shiori
Waseda University
Japan
[email protected]
Jiang, Cho-Pei
National Formosa University
Taiwan
[email protected]
Graca, Paulina
Poland
[email protected]
Jun, Jiang
Imperial College London
UK
[email protected]
Grinfeld, Shaul
Rafael
Israel
[email protected]
Jun, Liu
UK
[email protected]
Gronostajski, Zbigniew
Wrocław University of Technology
Poland
[email protected]
Junker, Daniel
FAU
Germany
[email protected]
Hagino, Naoto
Kanagawa Institute of Technology
Japan
[email protected]
Kajikawa, Shohei
University of Electro-Communications
Japan
[email protected]
Harris, Nathan
Ecole de Technologie Superieure
Canada
[email protected]
Kang, Ji
UK
[email protected]
Hirota, Kenji
Fukuoka Institute of Technology
Japan
[email protected]
Khadeev, Grigorii
Vyksa Steel Works
Russia
[email protected]
Hofmann, Dennis
University of Stuttgart
Germany
[email protected]
Khayatzadeh, Saber
UK
[email protected]
Howson, Michael
UK
[email protected]
Kitowski, Jacek
Poland
[email protected]
Hristov, Vladimir
Tokai University
Japan
[email protected]
Kittner, Kai
Germany
[email protected]
Ko, Dae-Cheol
Pusan National University
South Korea
[email protected]
Leicht, Uwe
Robert BOSCH GmbH
Germany
[email protected]
Konstantinov, Dmitrii
Nosov Magnitogorsk State Technical University
Russia
[email protected]
Leinonen, Olli
University of Oulu
Finland
[email protected]
Kopytek, Edyta
Poland
[email protected]
Lezhnev, Sergey
Rudny Industrial Insitute
Kazakhstan
[email protected]
Krawczyk, Jakub
Wrocław University of Technology
Poland
[email protected]
Li, Nan
UK
[email protected]
Krzyżanowski, Michał
Poland
[email protected]
Li, Yong
UK
[email protected]
Kuboki, Takashi
University of Electro-Communications
Japan
[email protected]
Lin, Jianguo
UK
[email protected]
Kumar, Santosh
Indira Gandhi Centre for Atomic Research
India
[email protected]
Lisiecki, Łukasz
Poland
[email protected]
Kusiak, Jan
Poland
[email protected]
Liu, Gang
Harbin Insitute of Technology
China
[email protected]
Kuziak, Roman
IMŻ Gliwice
Poland
[email protected]
Liu, Yanxiong
Wuhan University of Technology
China
[email protected]
Kwiecień, Marcin
Poland
[email protected]
Maeno, Tomoyoshi
Yokohama National University
Japan
[email protected]
Larkiola, Jari
University of Oulu
Finland
[email protected]
Majta, Janusz
Poland
[email protected]
Le Quilliec, Guenhael
Laboratoire de Mécanique et Rhéologie
France
[email protected]
Manabe, Ken-ichi
Japan
[email protected]
Lee, Yong-Shin
Kookmin University
Republic of Korea
[email protected]
Matsuura, Kiyotaka
Hokkaido University
Japan
[email protected]
Legwand, Adam
Poland
[email protected]
Mehtedi, Mohamed El
Universita Politecnica delle Marche
Italy
[email protected]
Mendiguren, Joseba
Spain
[email protected]
Nakagawa, Yuki
Japan
[email protected]
Micari, Fabrizio
Italy
[email protected]
Neh, Kristina
Technische Universitat Bergakademie Freiberg
Germany
[email protected]
Michalski, Markus
FAU
Germany
[email protected]
Nemecek, Jiri
Czech Technical University in Prague
Czech Republic
[email protected]
Milenin, Andrij
Poland
[email protected]
Nomura, Takashi
Nogoya Institute of Technology
Japan
[email protected]
Miłek, Tomasz
Kielce University of Technology
Poland
[email protected]
Novella, Michele Francesco
University of Padua
Italy
[email protected]
Mohamed, Masoud
Nothern Border University
Egypt
[email protected]
Nylander, Jari
SSAB Europe
Finland
[email protected]
Mohamed, Mohamed
UK
[email protected]
Okada, Masato
University of Fukui
Japan
[email protected]
Mojzis, Milan
ZP Research and Development Centre
Slovakia
[email protected]
Okano, Takehiro
Waseda University
Japan
[email protected]
Mori, Ken-ichiro
Japan
[email protected]
Otoni Carrea, Edmilson
Universidade Federal de Itajuba
Brasil
[email protected]
Mróz, Sebastian
Częstochowa University of Technology
Poland
[email protected]
Otsu, Masaaki
University of Fukui
Japan
[email protected]
Murasawa, Kodai
Waseda University
Japan
[email protected]
Overhagen, Christian
University of Duisburg-Essen
Germany
[email protected]
Muszka, Krzysztof
Poland
[email protected]
Paćko, Marek
Poland
[email protected]
Nadolski, Maciej
Politechnika Częstochowska
Poland
[email protected]
Palumbo, Gianfranco
Politecnico di Bari
Italy
[email protected]
Nagashima, Hidetoshi
Tokai University
Japan
[email protected]
Paul, Henryk
Institute of Metallurgy and Materials Science
Poland
[email protected]
Pennington, Jamie
UK
[email protected]
Quoc Tuan, Pham
Kyungpook National University
Republic of Korea
[email protected]
Pereloma, Elena
University of Wollongong
Australia
[email protected]
Rączka, Adam
BGH Polska sp. z o. o.
Poland
[email protected]
Pernach, Monika
Poland
[email protected]
Ran, Pan
UK
[email protected]
Pesin, Ilya
Russia
[email protected]
Rauch, Łukasz
Poland
[email protected]
Pesin, Alexander
Russia
[email protected]
Ridzon, Martin
ZP Research and Development Centre
Slovakia
[email protected]
Petrov, Michael
University of Mechanical Engineering
Russia
[email protected]
Rumiński, Maciej
Poland
[email protected]
Pietrzyk, Maciej
Poland
[email protected]
Ryttberg, Kristina
AB SKF
Sweden
[email protected]
Pohjonen, Aarne
University of Oulu
Finland
[email protected]
Sáenz de Argandona, Eneko
Spain
eSá[email protected]
Politis, Denis
UK
[email protected]
Saldana Garza, Edgar Ivan
UK
[email protected]
Politis, Nicholas
UK
[email protected]
Sasada, Masahiro
Kanagawa University
Japan
[email protected]
Polyakova, Marina
Russia
[email protected]
Sasaki, Hironori
Tokyo Denki University
Japan
[email protected]
Pope, Jacob
UK
[email protected]
Schneider, Matthias
Germany
[email protected]
Presz, Wojciech
Warsaw University of Technology
Poland
[email protected]
Schmidtchen, Matthias
Germany
[email protected]
Pustovoitov, Denis
Russia
[email protected]
Seyboldt, Christoph
Germany
[email protected]
Shaw, Lee
Alcoa Forgings and Extrusions
UK
[email protected]
Stebunov, Sergey
QuantorForm Ltd.
Russia
[email protected]
Shi, Zhusheng
UK
[email protected]
Stefanik, Andrzej
Poland
[email protected]
Shimizu, Tetsuhide
Japan
[email protected]
Stefańska-Kądziela, Monika
Poland
[email protected]
Sibalic, Nikola
University of Montenegro
Montenegro
[email protected]
Suliga, Maciej
Poland
[email protected]
Silva, Jesus Talamantes
Sheffield Forgemasters International
UK
[email protected]
Suzuki, Shinsuke
Waseda University
Japan
[email protected]
Simonetto, Enrico
University of Padua
Italy
[email protected]
Szeliga, Danuta
Poland
[email protected]
Sing Tsang, Kwun
UK
[email protected]
Sztangret, Łukasz
Poland
[email protected]
Sitko, Mateusz
Poland
[email protected]
Szyndler, Joanna
Poland
[email protected]
Skuza, Wojciech
Institute of Metallurgy and Materials Science
Poland
[email protected]
Takaki, Tomohiro
JX Nippon Oil & Energy Corporation
Japan
[email protected]
Śleboda, Tomasz
Poland
[email protected]
Takuda, Hirohiko
Kyoto University
Japan
[email protected]
Smyk, Anna
Poland
[email protected]
Teller, Marco
Germany
[email protected]
Smyk, Grzegorz
Poland
[email protected]
Tobias, Konrad
Daimler AG
Germany
[email protected]
Snippe, Corijn
Bosch Transmission Technology B.V.
Netherlands
[email protected]
Tokunaga, Toko
Hokkaido University
Japan
[email protected]
Sroka, Jakub
Poland
[email protected]
Tomohiro, Murakami
Polytechnic University
Japan
[email protected]
Tzou, Gow-Yi
Chung-Chou University of Science and Technology
Taiwan
[email protected]
Uranga, Pello
CEIT and Tecnun
Spain
[email protected]
Wang, Chu
Beihang University
China
[email protected]
Wang, Liliang
UK
[email protected]
Wang, Yi
UK
[email protected]
Weston, Nick
UK
[email protected]
Wiewiórowska, Sylwia
Poland
[email protected]
Wynne, Bradley
UK
[email protected]
Xi, Luan
UK
[email protected]
Yanagida, Akira
Tokyo Denki University
Japan
[email protected]
Yang, Ming
Japan
[email protected]
Yu, Xianglong
Tsinghua University
China
[email protected]
1st CALL FOR PAPERS
Metal Forming 2018
17th International Conference on Metal Forming
September 16-19, 2018, Loisir Hotel Toyohashi, Toyohashi, Japan
http://plast.me.tut.ac.jp/metalforming2018/
Chairs: K. Mori, Y. Abe, T. Maeno, D. Szeliga, K. Muszka, L. Fratini, F. Micari
The objective of Metal Forming 2018 is to provide a forum for presentations of theoretical, experimental and
industrial achievements in metal forming processes. The conference will give an opportunity for scientists and engineers
to discuss the results of recent research and technological developments in this area.
Topics















Processes
Rolling
Forging
Extrusion
Drawing
Sheet metal forming
Deep drawing
Bending
Hydroforming
Tube forming
High energy & explosive forming
Powder forming
Super-plastic forming
Semi-solid forming
Micro- and nano-forming
Incremental forming













Joining
Cutting
Deformation Mechanics
Plasticity theory
Constitutive models
Defects and damage
Formability
Anisotropy
Thermomechanical modelling
Microstructural modelling
Friction and lubrication
Process and System Modelling
Analytical techniques
Finite element methods
Implicit/explicit formulations














Multiscale modelling
Inverse analysis
CAD/CAM/CAE systems
AI techniques
Optimisation approaches
Control of processes
Tooling
Sensing
Additive manufacturing
Materials
Ferrous and non-ferrous metals
High performance metals
Porous metals
Composites
Polymers
Paper Submission
Prospective authors are invited to submit an abstract of one A4 page in English together with the completed preregistration form by October 31, 2017 to e-mail: [email protected]. Abstracts should outline the main
features, results, figures and conclusions of the work. Final manuscripts must be prepared in English according to typing
instructions, which will be supplied by the publisher. Submitted papers will be reviewed by members of the International
Scientific Committee and, if accepted, published from "Procedia Engineering" in Elsevier.
Important Dates
October 31, 2017
December 25, 2017
February 28, 2018
May 31, 2018
June 15, 2018
Submission of one A4 page abstract
Notification of abstract acceptance
Submission of full paper
Notification of paper acceptance
Deadline for author payment
Correspondence
Professor Ken-ichiro Mori
Department of Mechanical Engineering, Toyohashi University of Technology, Toyohashi, Japan
Fax.: +81-532-44-6690
Email: [email protected]
Toyohashi University
of Technology
Toyohashi, Japan
AGH University of
Science and Technology
Kraków, Poland
Palermo, Italy
NOTES
NOTES

Processing of metals and their alloys into final products that meet

Transkrypt

Podobne dokumenty

program