CLT10 sc Total chlorine sensor, pH combination sensor (on panel)
Transkrypt
CLT10 sc Total chlorine sensor, pH combination sensor (on panel)
CLT10 sc Total chlorine sensor, pH combination sensor (on panel) Nr produktu: LXV45B.98.22022 PLN Cena: Kontakt W ciągu 1 tygodnia CLT10 sc: Total reagentless chlorine sensor Total chlorine sensor with pH combination sensor (on panel) The CLT10 sc Total Chlorine Analyser measures total chlorine continuously for real time process control. It is based on amperometric technology and is fully compatible with all of Hach's digital controllers. The CLT10 sc can be used in most municipal and industrial applications, and is best utilised where waste stream management is a constraint. Hach‘s self diagnostics alerts you when the process has changed or the instument needs servicing. Diagnostic features include the CAL WATCH algorithm for warning of pH and chlorine calibration deviation and a non-contacting sample flow sensor for notification of insufficient sample flow. All warnings are easy to configure. Disinfection under control The CLF10 sc and CLT10 sc Chlorine Analyzers are designed to be used with all Hach sc digital controllers. Set up is fast and easy, and the system is compatible with the full line of Hach digital sensors. Minimal operation costs Plug and play Real-time process control EPA compliant according to Method 334.0 Parametry techniczne Certyfikaty: CE compliant for conducted and radiated emissions: - CISPR 11 (Class A limits) - EMC Immunity EN 61326-1 (Industrial limits) Additional certifications when connected to an sc controller Czas odpowiedzi: Total Chlorine: 100 s or less for 90% change (T90) at a stable temperature and pH Dokładność: Total Chlorine: ± 20 % of the reference test** (DPD) at stable pH greater than 8.5 Długość: Sensor: 195 mm Długość kabla: 1 m (between gateway and sc controller) Gwarancja: 2 lat Kompatybilność przetwornika: sc controller platforms Kompensacja temperatury: Internal temperature compensation in the sensor Limit detekcji: 30 ppb (0.03 ppm) Materiał: Panel: Corrosion-resistant, fully-submersible (stainless steel, PVC, silicon rubber and polycarbonate) Metoda kalibracji: 1-point or 2-point (zero and slope) calibration Metoda pomiarowa: Reagentless, electrochemical, three-electrode amperometric system Parametr: Total Chlorine Podłączenie kabla: 5 pin, M12 connector Powtarzalność: 30 ppb lub 3%, którakolwiek jest większa Połączenie linii odpływu: 1/2 in ID Połączenie linii próbki: 1/4 in OD Prędkość przepływu: 30 - 50 L/h L/h (od 7,9 do 13,2 galonów/h), optymalnie 40 L/h (10,5 galona/h) Sposób montażu: Panel or Wall Mounting Średnica: 25 mm Sterownik: Panel only Szerokość: 495.3 mm Temperatura próbki: 5 – 45°C (41 – 113°F) Waga: 5.5 kg Approximately 5.5 kg (12 lbs) Panel and empty panel-mounted components only Waga transportowa: W przybliżeniu 20 funtów (9,1 kg) Warunki przechowywania: -20 °C to 60 °C dry Width: 495 mm Współczynnik przepływu: Metric Wymiary: Sensor Only: 195 Wymiary (wys. x szer. x głęb.): 483 mm x 495 mm x 151 mm Wymogi energetyczne (napięcie): None Zakres ciśnienia: 0.5 bar, no pressure impulses and/or vibrations Zakres pH: 4-9 Zakres temperatury pracy: 0 - 45 °C Zakresy pomiarowe: 0 - 20 ppm Zakłócenia: e Chlorine: Monochloramine, chlorine dioxide, ozone, and chalk deposits. Total Chlorine: Chlorine dioxide, ozone and chalk deposits Product details pdf footer