programming new KM value READ EEPROM

CHANGE MILAGE – programming new
KM value
READ EEPROM – reads full content of
data from instrument cluster
Write EEPROM – writes full content of
data from instrument cluster
Clear DTCs – clearing history of faults in all
modules
Clear Service – clearing service entries
PIN + Keys - reading PIN, adding keys
(VDO)
ElproSys Sp. z o.o. ® Elektronika samochodowa, oprogramowanie, chip tuning.
44-100 Gliwice, ul. Tarnogórska 140 tel. (32) 301-2-301, fax. (32) 301-2-302
Audi A1, VW Passat with Advanced Key system
Advanced Key
Programming procedure for odometer with Advanced Key system
1. Remove odometer
2. Use cable C12 to read EEPROM 24C64 from odometer using function
EEPROM TOOL and save it on the MMC card. Please remember file name.
SAVED EEPROM FILE WILL FIT ONLY TO THE CURRENT CAR.
NO OTHER CARS CAN USE THIS FILE.
CHOOSING WRONG FILE WILL RESULT MALFUNCTION OF
ODOMETER AND AND/OR IMMOBILISER !!!
ElproSys Sp. z o.o. ® Elektronika samochodowa, oprogramowanie, chip tuning.
44-100 Gliwice, ul. Tarnogórska 140 tel. (32) 301-2-301, fax. (32) 301-2-302
3. Using EEPROM TOOL 24C64 load fileKey_24C64.bin to the odometer.
Plik Key_24C64.bin can be downloaded from our website www.diagprog.com
in DOWNLOAD section (available after login)
4. Install odometer back in the car.
START THE IGNITION BUT DO NOT START THE ENGINE.
5. Change KM value.
ElproSys Sp. z o.o. ® Elektronika samochodowa, oprogramowanie, chip tuning.
44-100 Gliwice, ul. Tarnogórska 140 tel. (32) 301-2-301, fax. (32) 301-2-302
6. In the program choose option KM with file
DiagProg 3 will ask appropriate file from MMC card. Choose the file you
saved on MMC card in step 2.
7. After changing KM value it is recommended to clear the faults (Clear
DTC’s)
8. If required, change oil service (Clear Service)
ElproSys Sp. z o.o. ® Elektronika samochodowa, oprogramowanie, chip tuning.
44-100 Gliwice, ul. Tarnogórska 140 tel. (32) 301-2-301, fax. (32) 301-2-302
Audi A1, VW Passat without Advanced Key system
Bez systemu Advanced Key
Programming procedure for odometer without Advanced Key system
1. Turn ignition ON.
2. Connect DiagProg 3 and change KM value in odometer using appropriate
program:
7. After changing KM value in odometer it is recommended to clear faults
(Clear DTC’s)
8. If required, change oil service (Clear Service)
ElproSys Sp. z o.o. ® Elektronika samochodowa, oprogramowanie, chip tuning.
44-100 Gliwice, ul. Tarnogórska 140 tel. (32) 301-2-301, fax. (32) 301-2-302